[PATCH 01/20] net: phy: xilinx: Remove non-DM prototype of phy_connect_gmii2rgmii()

Ramon Fried rfried.dev at gmail.com
Tue Mar 2 18:52:15 CET 2021


On Tue, Mar 2, 2021 at 5:35 PM Bin Meng <bmeng.cn at gmail.com> wrote:
>
> At present phy_connect_gmii2rgmii() is implemented using a DM API
> dev_of_offset() hence it cannot support a non-DM configuration.
> Remove the non-DM version prototype of phy_connect_gmii2rgmii()
> and make the driver depend on CONFIG_DM_ETH.
>
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>
>  drivers/net/phy/Kconfig | 1 +
>  drivers/net/phy/phy.c   | 6 ------
>  2 files changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index d69503067d..070ffa82cb 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -292,6 +292,7 @@ config PHY_XILINX
>
>  config PHY_XILINX_GMII2RGMII
>         bool "Xilinx GMII to RGMII Ethernet PHYs support"
> +       depends on DM_ETH
>         help
>           This adds support for Xilinx GMII to RGMII IP core. This IP acts
>           as bridge between MAC connected over GMII and external phy that
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 89e3076bfd..d9e03baf7b 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -942,15 +942,9 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev)
>  }
>
>  #ifdef CONFIG_PHY_XILINX_GMII2RGMII
> -#ifdef CONFIG_DM_ETH
>  static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
>                                                  struct udevice *dev,
>                                                  phy_interface_t interface)
> -#else
> -static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
> -                                                struct eth_device *dev,
> -                                                phy_interface_t interface)
> -#endif
>  {
>         struct phy_device *phydev = NULL;
>         int sn = dev_of_offset(dev);
> --
> 2.25.1
>
Reviewed-By: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list