[PATCH v2] arm: Add support for Kobol Helios64 board
Dennis Gilmore
dgilmore at fedoraproject.org
Tue Mar 2 19:22:54 CET 2021
Uwe submitted this board last Thursday
Dennis
On Tue, Mar 2, 2021 at 10:46 AM Christian Glombek
<lorbus at fedoraproject.org> wrote:
>
> The hardware is described in detail on Kobol's wiki at
> https://wiki.kobol.io/helios64/intro/.
>
> This commit is based on downstream work in Armbian by Aditya Prayoga [1].
> The devicetree is taken from Linux v5.12-rc1 and was originally submitted there by
> Uwe Kleine-Koenig [2].
>
> [1] https://github.com/ukleinek/armbian-build/blob/35c85295d351830aa59b624db524ba04b238faae/patch/kernel/rockchip64-current/add-board-helios64.patch
> [2] https://github.com/torvalds/linux/blob/7a7fd0de4a9804299793e564a555a49c1fc924cb/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
> ---
> arch/arm/dts/Makefile | 1 +
> .../arm/dts/rk3399-kobol-helios64-u-boot.dtsi | 136 +++++++
> arch/arm/dts/rk3399-kobol-helios64.dts | 372 ++++++++++++++++++
> arch/arm/mach-rockchip/rk3399/Kconfig | 17 +
> board/kobol/helios64/Kconfig | 24 ++
> board/kobol/helios64/MAINTAINERS | 6 +
> board/kobol/helios64/Makefile | 5 +
> board/kobol/helios64/helios64.c | 304 ++++++++++++++
> board/kobol/helios64/sys_otp.c | 250 ++++++++++++
> board/kobol/helios64/sys_otp.h | 12 +
> configs/helios64-rk3399_defconfig | 147 +++++++
> include/configs/helios64.h | 47 +++
> 12 files changed, 1321 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-kobol-helios64.dts
> create mode 100644 board/kobol/helios64/Kconfig
> create mode 100644 board/kobol/helios64/MAINTAINERS
> create mode 100644 board/kobol/helios64/Makefile
> create mode 100644 board/kobol/helios64/helios64.c
> create mode 100644 board/kobol/helios64/sys_otp.c
> create mode 100644 board/kobol/helios64/sys_otp.h
> create mode 100644 configs/helios64-rk3399_defconfig
> create mode 100644 include/configs/helios64.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 33e483f4fb..2c820bc2b7 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -124,6 +124,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
> rk3399-ficus.dtb \
> rk3399-firefly.dtb \
> rk3399-gru-bob.dtb \
> + rk3399-kobol-helios64.dtb \
> rk3399-khadas-edge.dtb \
> rk3399-khadas-edge-captain.dtb \
> rk3399-khadas-edge-v.dtb \
> diff --git a/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi
> new file mode 100644
> index 0000000000..6fe9d59df3
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2020 Aditya Prayoga <aditya at kobol.io>
> + */
> +
> +#include "rk3399-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr4-100.dtsi"
> +/ {
> + aliases {
> + spi0 = &spi1;
> + spi1 = &spi2;
> + spi2 = &spi5;
> + ethernet0 = &gmac;
> + ethernet1 = &usb_lan;
> + };
> +
> + chosen {
> + bootargs = "earlycon=uart8250,mmio32,0xff1a0000 earlyprintk";
> + stdout-path = "serial2:1500000n8";
> + u-boot,spl-boot-order = "same-as-spl", &spiflash, &sdmmc, &sdhci;
> + };
> +
> + config {
> + u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */
> + };
> +};
> +
> +&gpio1 {
> + usb-mux-hs {
> + gpio-hog;
> + gpios = <RK_PA4 GPIO_ACTIVE_HIGH>;
> + output-low;
> + line-name = "USB_MUX_HS";
> + };
> +
> + usb-mux-oe {
> + gpio-hog;
> + gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
> + output-high;
> + line-name = "USB_MUX_OE#";
> + };
> +
> + soc-flash-wp {
> + gpio-hog;
> + gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
> + output-low;
> + line-name = "SOC_WP#";
> + };
> +};
> +
> +&gpio2 {
> + sata-flash-wp {
> + gpio-hog;
> + gpios = <RK_PD0 GPIO_ACTIVE_LOW>;
> + output-high;
> + line-name = "SATA_WP#_LV";
> + };
> +};
> +
> +&gpio4 {
> + auto-on-en-d {
> + gpio-hog;
> + gpios = <RK_PD1 GPIO_ACTIVE_HIGH>;
> + output-low;
> + line-name = "AUTO_ON_EN_D";
> + };
> +
> + auto-on-en-clk {
> + gpio-hog;
> + gpios = <RK_PD2 GPIO_ACTIVE_HIGH>;
> + output-low;
> + line-name = "AUTO_ON_EN_CLK";
> + };
> +
> + board-rev-id-0 {
> + gpio-hog;
> + gpios = <RK_PD5 GPIO_ACTIVE_HIGH>;
> + input;
> + };
> +
> + board-rev-id-1 {
> + gpio-hog;
> + gpios = <RK_PD6 GPIO_ACTIVE_HIGH>;
> + input;
> + };
> +};
> +
> +&int_hub {
> + compatible = "usb-hub";
> + usb,device-class = <USB_CLASS_HUB>;
> +};
> +
> +&pcie_prst {
> + rockchip,pins =
> + <2 RK_PD4 RK_FUNC_GPIO &pcfg_output_low>;
> +};
> +
> +&pcie_pwr_en {
> + rockchip,pins =
> + <1 RK_PD0 RK_FUNC_GPIO &pcfg_output_low>;
> +};
> +
> +&pinctrl {
> + usb {
> + usb_mux_hs: usb-mux-hs {
> + rockchip,pins =
> + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + usb_mux_oe: usb-mux-oe {
> + rockchip,pins =
> + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&spi1 {
> + spiflash: flash at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0x0>;
> + spi-max-frequency = <25000000>;
> + status = "okay";
> + m25p,fast-read;
> + u-boot,dm-pre-reloc;
> + };
> +};
> +
> +&vdd_center {
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> + regulator-init-microvolt = <950000>;
> +};
> +
> +&vdd_log {
> + regulator-init-microvolt = <900000>;
> +};
> diff --git a/arch/arm/dts/rk3399-kobol-helios64.dts b/arch/arm/dts/rk3399-kobol-helios64.dts
> new file mode 100644
> index 0000000000..66c725a342
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-kobol-helios64.dts
> @@ -0,0 +1,372 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Aditya Prayoga <aditya at kobol.io>
> + */
> +
> +/*
> + * The Kobol Helios64 is a board designed to operate as a NAS and optionally
> + * ships with an enclosing that can host five 2.5" hard disks.
> + *
> + * See https://wiki.kobol.io/helios64/intro/ for further details.
> + */
> +
> +/dts-v1/;
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + model = "Kobol Helios64";
> + compatible = "kobol,helios64", "rockchip,rk3399";
> +
> + avdd_1v8_s0: avdd-1v8-s0 {
> + compatible = "regulator-fixed";
> + regulator-name = "avdd_1v8_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc3v3_sys_s3>;
> + };
> +
> + clkin_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "clkin_gmac";
> + #clock-cells = <0>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>;
> +
> + led-0 {
> + label = "helios64:green:status";
> + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> +
> + led-1 {
> + label = "helios64:red:fault";
> + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> + default-state = "keep";
> + };
> + };
> +
> + vcc1v8_sys_s0: vcc1v8-sys-s0 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc1v8_sys_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc1v8_sys_s3>;
> + };
> +
> + vcc3v0_sd: vcc3v0-sd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vcc3v0_sd";
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_pwr_h>;
> + vin-supply = <&vcc3v3_sys_s3>;
> + };
> +
> + vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc5v0_sys: vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin_bkup>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc12v_dcin: vcc12v-dcin {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + vcc12v_dcin_bkup: vcc12v-dcin-bkup {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin_bkup";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +};
> +
> +/*
> + * The system doesn't run stable with cpu freq enabled, so disallow the lower
> + * frequencies until this problem is properly understood and resolved.
> + */
> +&cluster0_opp {
> + /delete-node/ opp00;
> + /delete-node/ opp01;
> + /delete-node/ opp02;
> + /delete-node/ opp03;
> + /delete-node/ opp04;
> +};
> +
> +&cluster1_opp {
> + /delete-node/ opp00;
> + /delete-node/ opp01;
> + /delete-node/ opp02;
> + /delete-node/ opp03;
> + /delete-node/ opp04;
> + /delete-node/ opp05;
> + /delete-node/ opp06;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gmac {
> + assigned-clock-parents = <&clkin_gmac>;
> + assigned-clocks = <&cru SCLK_RMII_SRC>;
> + clock_in_out = "input";
> + phy-mode = "rgmii";
> + phy-supply = <&vcc_lan>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins &gphy_reset>;
> + rx_delay = <0x20>;
> + tx_delay = <0x28>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <168>;
> + i2c-scl-falling-time-ns = <4>;
> + status = "okay";
> +
> + rk808: pmic at 1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc3v3_sys_s3>;
> + vcc9-supply = <&vcc5v0_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc5v0_sys>;
> + vcc12-supply = <&vcc3v3_sys_s3>;
> + vddio-supply = <&vcc3v0_s3>;
> + wakeup-source;
> + #clock-cells = <1>;
> +
> + regulators {
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-name = "vdd_cpu_l";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc1v8_sys_s3: DCDC_REG4 {
> + regulator-name = "vcc1v8_sys_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc_sdio_s0: LDO_REG4 {
> + regulator-name = "vcc_sdio_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> +
> + vcc3v0_s3: LDO_REG8 {
> + regulator-name = "vcc3v0_s3";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator at 40 {
> + compatible = "silergy,syr827";
> + reg = <0x40>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu_b";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <1000>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <160>;
> + i2c-scl-falling-time-ns = <30>;
> + status = "okay";
> +
> + temp at 4c {
> + compatible = "national,lm75";
> + reg = <0x4c>;
> + };
> +};
> +
> +&io_domains {
> + audio-supply = <&vcc1v8_sys_s0>;
> + bt656-supply = <&vcc1v8_sys_s0>;
> + gpio1830-supply = <&vcc3v0_s3>;
> + sdmmc-supply = <&vcc_sdio_s0>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + gmac {
> + gphy_reset: gphy-reset {
> + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
> + };
> + };
> +
> + leds {
> + sys_grn_led_on: sys-grn-led-on {
> + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + sys_red_led_on: sys-red-led-on {
> + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + vcc3v0-sd {
> + sdmmc0_pwr_h: sdmmc0-pwr-h {
> + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + pmu1830-supply = <&vcc3v0_s3>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs200-1_8v;
> + non-removable;
> + vqmmc-supply = <&vcc1v8_sys_s0>;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> + vmmc-supply = <&vcc3v0_sd>;
> + vqmmc-supply = <&vcc_sdio_s0>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
> index 17628f9171..7890bafe56 100644
> --- a/arch/arm/mach-rockchip/rk3399/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3399/Kconfig
> @@ -28,6 +28,22 @@ config TARGET_PINEBOOK_PRO_RK3399
> with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
> 1920*1080 screen and all the usual laptop features.
>
> +config TARGET_HELIOS64
> + bool "Kobol Innovations Helios64"
> + select BOARD_LATE_INIT
> + help
> + Helios64 is a Network Attached Storage board based on Rockchip RK3399.
> +
> + Key features of the Helios64 include:
> + * on-board PCIe to 5 Ports SATA Controller JMB585
> + * on-board USB 3.0 hub (3x USB 3.0 host)
> + * USB Type-C (Support DisplayPort Alt Mode)
> + * on-board 1 Gigabit Ethernet
> + * on-board 2.5 Gigabit Ethernet (Realtek RTL8156)
> + * on-board eMMC
> + * on-board LPDDR4
> + * SPI, I2C, UART, GPIO
> +
> config TARGET_PUMA_RK3399
> bool "Theobroma Systems RK3399-Q7 (Puma)"
> help
> @@ -153,6 +169,7 @@ endif # BOOTCOUNT_LIMIT
>
> source "board/firefly/roc-pc-rk3399/Kconfig"
> source "board/google/gru/Kconfig"
> +source "board/kobol/helios64/Kconfig"
> source "board/pine64/pinebook-pro-rk3399/Kconfig"
> source "board/pine64/rockpro64_rk3399/Kconfig"
> source "board/rockchip/evb_rk3399/Kconfig"
> diff --git a/board/kobol/helios64/Kconfig b/board/kobol/helios64/Kconfig
> new file mode 100644
> index 0000000000..644cdbd8f3
> --- /dev/null
> +++ b/board/kobol/helios64/Kconfig
> @@ -0,0 +1,24 @@
> +if TARGET_HELIOS64
> +
> +config SYS_BOARD
> + default "helios64"
> +
> +config SYS_VENDOR
> + default "kobol"
> +
> +config SYS_CONFIG_NAME
> + default "helios64"
> +
> +config BOARD_SPECIFIC_OPTIONS # dummy
> + def_bool y
> +
> +config ENV_SECT_SIZE
> + default 0x1000 if ENV_IS_IN_SPI_FLASH
> +
> +config ENV_SIZE
> + default 0x8000
> +
> +config ENV_OFFSET
> + default 0x460000 if ENV_IS_IN_SPI_FLASH
> +
> +endif
> diff --git a/board/kobol/helios64/MAINTAINERS b/board/kobol/helios64/MAINTAINERS
> new file mode 100644
> index 0000000000..646644d485
> --- /dev/null
> +++ b/board/kobol/helios64/MAINTAINERS
> @@ -0,0 +1,6 @@
> +HELIOS64 BOARD
> +M: Christian Glombek <lorbus at fedoraproject.org>
> +S: Maintained
> +F: board/kobol/helios64/
> +F: include/configs/helios64.h
> +F: configs/helios64_defconfig
> diff --git a/board/kobol/helios64/Makefile b/board/kobol/helios64/Makefile
> new file mode 100644
> index 0000000000..ab34245a6d
> --- /dev/null
> +++ b/board/kobol/helios64/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2020 Aditya Prayoga <aditya at kobol.io>
> +
> +obj-y := helios64.o sys_otp.o
> diff --git a/board/kobol/helios64/helios64.c b/board/kobol/helios64/helios64.c
> new file mode 100644
> index 0000000000..86349339fb
> --- /dev/null
> +++ b/board/kobol/helios64/helios64.c
> @@ -0,0 +1,304 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2020 Aditya Prayoga <aditya at kobol.io>
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <env.h>
> +#include <log.h>
> +#include <led.h>
> +#include <pci.h>
> +#include <power/regulator.h>
> +#include <scsi.h>
> +#include <spl_gpio.h>
> +#include <syscon.h>
> +#include <usb.h>
> +#include <linux/delay.h>
> +#include <asm/io.h>
> +#include <asm/gpio.h>
> +#include <asm/arch-rockchip/clock.h>
> +#include <asm/arch-rockchip/gpio.h>
> +#include <asm/arch-rockchip/grf_rk3399.h>
> +#include <asm/arch-rockchip/hardware.h>
> +#include <asm/arch-rockchip/misc.h>
> +#include <asm/arch-rockchip/periph.h>
> +
> +#include "sys_otp.h"
> +
> +#ifndef CONFIG_TPL_BUILD
> +int board_early_init_f(void)
> +{
> +#ifdef CONFIG_SPL_BUILD
> +#define GPIO0_BASE 0xff720000
> +#define GRF_BASE 0xff770000
> + struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
> + struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
> +
> + /* Turn ON status LED. At this stage, FDT & DM is not initialized yet */
> + spl_gpio_output(gpio, GPIO(BANK_B, 4), 1);
> +#endif
> + return 0;
> +}
> +#endif
> +
> +#ifndef CONFIG_SPL_BUILD
> +int board_early_init_r(void)
> +{
> + read_otp_data();
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_MISC_INIT_R
> +#define GRF_IO_VSEL_BT565_SHIFT 0
> +#define GRF_IO_VSEL_AUDIO_SHIFT 1
> +#define GRF_IO_VSEL_SDMMC_SHIFT 2
> +#define GRF_IO_VSEL_GPIO1830_SHIFT 3
> +
> +#define PMUGRF_CON0_VSEL_SHIFT 8
> +#define PMUGRF_CON0_PMU1830_VOL_SHIFT 9
> +static void setup_iodomain(void)
> +{
> + struct rk3399_grf_regs *grf =
> + syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
> + struct rk3399_pmugrf_regs *pmugrf =
> + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
> +
> + /* BT565 is in 1.8v domain */
> + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
> +
> + /* AUDIO is in 1.8v domain */
> + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_AUDIO_SHIFT);
> +
> + /* SDMMC is in 3.0v domain */
> + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_SDMMC_SHIFT);
> +
> + /* GPIO1830 is in 3.0v domain */
> + rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_GPIO1830_SHIFT);
> +
> + /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
> + rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
> + rk_setreg(&pmugrf->soc_con0, 0 << PMUGRF_CON0_PMU1830_VOL_SHIFT);
> +}
> +
> +/*
> + * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card.
> + *
> + * If bootsource is uSD-card we can assume that we want to use the
> + * SD-Card instead of the eMMC as first boot_target for distroboot.
> + * We only want to swap the defaults and not any custom environment a
> + * user has set. We exit early if a changed boot_targets environment
> + * is detected.
> + */
> +static int setup_boottargets(void)
> +{
> + const char *boot_device =
> + ofnode_read_chosen_string("u-boot,spl-boot-device");
> + char *env_default, *env;
> +
> + if (!boot_device) {
> + debug("%s: /chosen/u-boot,spl-boot-device not set\n",
> + __func__);
> + return -1;
> + }
> + debug("%s: booted from %s\n", __func__, boot_device);
> +
> + env_default = env_get_default("boot_targets");
> + env = env_get("boot_targets");
> + if (!env) {
> + debug("%s: boot_targets does not exist\n", __func__);
> + return -1;
> + }
> + debug("%s: boot_targets current: %s - default: %s\n",
> + __func__, env, env_default);
> +
> + if (strcmp(env_default, env) != 0) {
> + debug("%s: boot_targets not default, don't change it\n",
> + __func__);
> + return 0;
> + }
> +
> + /*
> + * Only run, if booting from mmc1 (i.e. /mmc at fe320000) and
> + * only consider cases where the default boot-order first
> + * tries to boot from mmc0 (eMMC) and then from mmc1
> + * (i.e. external SD).
> + *
> + * In other words: the SD card will be moved to earlier in the
> + * order, if U-Boot was also loaded from the SD-card.
> + */
> + if (!strcmp(boot_device, "/mmc at fe320000")) {
> + char *mmc0, *mmc1;
> +
> + debug("%s: booted from SD-Card\n", __func__);
> + mmc0 = strstr(env, "mmc0");
> + mmc1 = strstr(env, "mmc1");
> +
> + if (!mmc0 || !mmc1) {
> + debug("%s: only one mmc boot_target found\n", __func__);
> + return -1;
> + }
> +
> + /*
> + * If mmc0 comes first in the boot order, we need to change
> + * the strings to make mmc1 first.
> + */
> + if (mmc0 < mmc1) {
> + mmc0[3] = '1';
> + mmc1[3] = '0';
> + debug("%s: set boot_targets to: %s\n", __func__, env);
> + env_set("boot_targets", env);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void setup_leds(void)
> +{
> + struct udevice *dev;
> +
> + led_get_by_label("helios64::status", &dev);
> + led_set_state(dev, LEDST_OFF);
> + mdelay(250);
> + led_set_state(dev, LEDST_ON);
> +}
> +
> +int misc_init_r(void)
> +{
> + const u32 cpuid_offset = 0x7;
> + const u32 cpuid_length = 0x10;
> + u8 cpuid[cpuid_length];
> + int ret;
> +
> + setup_iodomain();
> + set_board_info();
> +
> + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
> + if (ret)
> + return ret;
> +
> + ret = rockchip_cpuid_set(cpuid, cpuid_length);
> + if (ret)
> + return ret;
> +
> + if (mac_read_from_otp())
> + ret = rockchip_setup_macaddr();
> +
> + setup_boottargets();
> + setup_leds();
> +
> + return ret;
> +}
> +#endif
> +
> +#ifdef CONFIG_ROCKCHIP_ADVANCED_RECOVERY
> +void rockchip_prepare_download_mode(void)
> +{
> + struct gpio_desc *enable, *mux;
> +
> + if (gpio_hog_lookup_name("USB_MUX_OE#", &enable)) {
> + debug("Fail to get USB_MUX_OE\n");
> + return;
> + }
> +
> + if (gpio_hog_lookup_name("USB_MUX_HS", &mux)) {
> + debug("Fail to get USB_MUX_HS\n");
> + return;
> + }
> +
> + dm_gpio_set_value(enable, 0);
> + mdelay(100);
> + dm_gpio_set_value(mux, 1);
> + mdelay(100);
> + dm_gpio_set_value(enable, 1);
> +}
> +#endif
> +
> +#ifdef CONFIG_LAST_STAGE_INIT
> +static void auto_power_enable(void)
> +{
> + struct gpio_desc *enable, *clock;
> +
> + if (gpio_hog_lookup_name("AUTO_ON_EN_D", &enable)) {
> + debug("Fail to get AUTO_ON_EN_D\n");
> + return;
> + }
> +
> + if (gpio_hog_lookup_name("AUTO_ON_EN_CLK", &clock)) {
> + debug("Fail to get AUTO_ON_EN_CLK\n");
> + return;
> + }
> +
> + dm_gpio_set_value(enable, 1);
> + dm_gpio_set_value(clock, 1);
> + mdelay(10);
> + dm_gpio_set_value(clock, 0);
> +}
> +
> +static void sata_power_enable(void)
> +{
> + struct udevice *rail_a, *rail_b;
> + int ret;
> +
> + ret = regulator_get_by_platname("power_hdd_a", &rail_a);
> + if (!ret) {
> + ret = regulator_set_enable(rail_a, true);
> + if (!ret)
> + mdelay(10000);
> + }
> +
> + ret = regulator_get_by_platname("power_hdd_b", &rail_b);
> + if (!ret)
> + ret = regulator_set_enable(rail_b, true);
> +
> +}
> +
> +int last_stage_init(void)
> +{
> + auto_power_enable();
> + sata_power_enable();
> +
> +#ifdef CONFIG_PCI
> + scsi_scan(true);
> +#endif
> +
> + return 0;
> +}
> +#endif
> +
> +#if defined(CONFIG_DISPLAY_BOARDINFO_LATE)
> +int checkboard(void)
> +{
> + int major, minor;
> +
> + printf("Revision: ");
> +
> + if (!get_revision(&major, &minor))
> + printf("%i.%i - %s\n", major, minor, get_variant());
> + else
> + printf("UNKNOWN\n");
> +
> + return 0;
> +}
> +#endif
> +
> +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
> +int ft_board_setup(void *blob, struct bd_info *bd)
> +{
> + char *env;
> +
> + env = env_get("board_rev");
> + if (env)
> + fdt_setprop_string(blob, fdt_path_offset(blob, "/"),
> + "kobol,board-rev", env);
> +
> + env = env_get("cpuid#");
> + if (env)
> + fdt_setprop_string(blob, fdt_path_offset(blob, "/"),
> + "kobol,cpu-id", env);
> +
> + return 0;
> +}
> +#endif
> diff --git a/board/kobol/helios64/sys_otp.c b/board/kobol/helios64/sys_otp.c
> new file mode 100644
> index 0000000000..8c20693c0e
> --- /dev/null
> +++ b/board/kobol/helios64/sys_otp.c
> @@ -0,0 +1,250 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +
> +#include <linux/types.h>
> +#include <dm.h>
> +#include <spi.h>
> +#include <log.h>
> +#include <net.h>
> +#include <u-boot/crc.h>
> +
> +#include "sys_otp.h"
> +
> +#define OTP_DEVICE_BUS 0
> +#define OTP_DEVICE_CS 0
> +#define MAX_NUM_PORTS 2
> +
> +enum board_variant {
> + BOARD_VARIANT_INVALID = 0,
> + BOARD_VARIANT_ENG_SAMPLE,
> + BOARD_VARIANT_4G_PROD_NO_ECC,
> + BOARD_VARIANT_MAX
> +};
> +
> +struct __attribute__ ((__packed__)) otp_data_t {
> + u8 magic[8];
> + u8 part_num[16];
> + u8 variant;
> + u8 revision;
> + u8 serial_num[6];
> + u8 mfg_year[2];
> + u8 mfg_month;
> + u8 mfg_day;
> + u8 mac_addr[MAX_NUM_PORTS][6];
> + u8 reserved[204];
> + u32 checksum;
> +} otp;
> +
> +static struct spi_slave *slave;
> +static int has_been_read = 0;
> +static int data_valid = 0;
> +
> +static inline int is_data_valid(void)
> +{
> + return data_valid;
> +}
> +
> +static inline int is_valid_header(void)
> +{
> + if ((otp.magic[0] == 'H') || (otp.magic[1] == '6') ||
> + (otp.magic[2] == '4') || (otp.magic[3] == 'N') ||
> + (otp.magic[4] == 'P') || (otp.magic[5] == 'V') ||
> + (otp.magic[6] == '1') || (otp.magic[7] == 0))
> +
> + return 1;
> +
> + return 0;
> +}
> +
> +static int init_system_otp(int bus, int cs)
> +{
> + int ret;
> + char name[30], *str;
> + struct udevice *dev;
> +
> + snprintf(name, sizeof(name), "generic_%d:%d", bus, cs);
> + str = strdup(name);
> + if (!str)
> + return -ENOMEM;
> + ret = spi_get_bus_and_cs(bus, cs, 25000000, CONFIG_DEFAULT_SPI_MODE, "spi_generic_drv",
> + str, &dev, &slave);
> + return ret;
> +}
> +
> +#ifdef DEBUG
> +/**
> + * show_otp_data - display the contents of the OTP register
> + */
> +static void show_otp_data(void)
> +{
> + u32 i;
> + u32 crc;
> +
> + const char* var_str[BOARD_VARIANT_MAX] = {
> + "Invalid variant",
> + "Engineering Sample",
> + "Production - 4GB non ECC"
> + };
> +
> + printf("\n");
> + printf("Register dump: (%lu bytes)\n", sizeof(otp));
> + for (i = 0; i < sizeof(otp); i++) {
> + if ((i % 16) == 0)
> + printf("%02X: ", i);
> + printf("%02X ", ((u8 *)&otp)[i]);
> + if (((i % 16) == 15) || (i == sizeof(otp) - 1))
> + printf("\n");
> + }
> +
> + if (!is_valid_header())
> + return;
> +
> + printf("Part Number: %s\n", otp.part_num);
> + printf("Variant: %s\n", var_str[otp.variant]);
> + printf("Revision: %x.%x\n", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f);
> + printf("Serial Number: %012llx\n", *((uint64_t*) otp.serial_num) &
> + 0xFFFFFFFFFFFF);
> + printf("Manufacturing Date: %02X-%02X-%04X (DD-MM-YYYY)\n", otp.mfg_day,
> + otp.mfg_month, *(u16*) otp.mfg_year);
> +
> + printf("1GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n",
> + otp.mac_addr[0][0], otp.mac_addr[0][1], otp.mac_addr[0][2],
> + otp.mac_addr[0][3], otp.mac_addr[0][4], otp.mac_addr[0][5]);
> +
> + printf("2.5GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n",
> + otp.mac_addr[1][0], otp.mac_addr[1][1], otp.mac_addr[1][2],
> + otp.mac_addr[1][3], otp.mac_addr[1][4], otp.mac_addr[1][5]);
> +
> + crc = crc32(0, (void *)&otp, sizeof(otp) - 4);
> +
> + if (crc == le32_to_cpu(otp.checksum))
> + printf("CRC: %08x\n\n", le32_to_cpu(otp.checksum));
> + else
> + printf("CRC: %08x (should be %08x)\n\n",
> + le32_to_cpu(otp.checksum), crc);
> +
> +}
> +#endif
> +
> +int read_otp_data(void)
> +{
> + int ret;
> + u8 dout[5];
> +
> + if (has_been_read) {
> + if (is_data_valid())
> + return 0;
> + else
> + goto data_invalid;
> + }
> +
> + ret = init_system_otp(OTP_DEVICE_BUS, OTP_DEVICE_CS);
> + if (ret)
> + return ret;
> +
> + ret = spi_claim_bus(slave);
> + if (ret) {
> + debug("SPI: Failed to claim SPI bus: %d\n", ret);
> + return ret;
> + }
> +
> + dout[0] = 0x48;
> + dout[1] = 0x00;
> + dout[2] = 0x10; /* Security Register #1 */
> + dout[3] = 0x00;
> + dout[4] = 0x00; /* Dummy Byte */
> +
> + ret = spi_write_then_read(slave, dout, sizeof(dout), NULL, (u8 *)&otp,
> + sizeof(otp));
> +
> + spi_release_bus(slave);
> +#ifdef DEBUG
> + show_otp_data();
> +#endif
> +
> + has_been_read = (ret == 0) ? 1 : 0;
> + if (!is_valid_header())
> + goto data_invalid;
> +
> + if (crc32(0, (void *)&otp, sizeof(otp) - 4) ==
> + le32_to_cpu(otp.checksum))
> + data_valid = 1;
> +
> + if (!is_data_valid())
> + goto data_invalid;
> +
> + return 0;
> +
> +data_invalid:
> + printf("Invalid board ID data!\n");
> + return -1;
> +}
> +
> +int get_revision(int *major, int *minor)
> +{
> + if (!is_data_valid())
> + return -1;
> +
> + *major = (otp.revision & 0xf0) >> 4;
> + *minor = otp.revision & 0x0f;
> +
> + return 0;
> +}
> +
> +const char *get_variant(void)
> +{
> + const char* var_str[BOARD_VARIANT_MAX] = {
> + "Unknown",
> + "Engineering Sample",
> + "4GB non ECC"
> + };
> +
> + if ((otp.variant < BOARD_VARIANT_ENG_SAMPLE) ||
> + (otp.variant >= BOARD_VARIANT_MAX))
> + return var_str[0];
> +
> + return var_str[otp.variant];
> +}
> +
> +void set_board_info(void)
> +{
> + char env_str[13];
> +
> + if (!is_data_valid())
> + return;
> +
> + snprintf(env_str, sizeof(env_str), "%i.%i", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f);
> + env_set("board_rev", env_str);
> +
> + sprintf(env_str, "%012llx", *((uint64_t*) otp.serial_num) &
> + 0xFFFFFFFFFFFF);
> +
> + env_set("serial#", env_str);
> +}
> +
> +int mac_read_from_otp(void)
> +{
> + unsigned int i;
> + int ret;
> +
> + if (!is_data_valid())
> + return -1;
> +
> + for (i = 0; i < MAX_NUM_PORTS; i++) {
> + char enetvar[9];
> +
> + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i);
> +
> + if (!is_valid_ethaddr(otp.mac_addr[i])) {
> + debug("Not valid %s!\n", enetvar);
> + continue;
> + }
> +
> + /* Only initialize environment variables that are blank
> + * (i.e. have not yet been set)
> + */
> + if (!env_get(enetvar))
> + eth_env_set_enetaddr(enetvar, otp.mac_addr[i]);
> + }
> +
> + return ret;
> +}
> diff --git a/board/kobol/helios64/sys_otp.h b/board/kobol/helios64/sys_otp.h
> new file mode 100644
> index 0000000000..48273d4a95
> --- /dev/null
> +++ b/board/kobol/helios64/sys_otp.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +
> +#ifndef __HELIOS64_SYS_OTP_H
> +#define __HELIOS64_SYS_OTP_H
> +
> +int read_otp_data(void);
> +void set_board_info(void);
> +int get_revision(int *major, int *minor);
> +const char *get_variant(void);
> +int mac_read_from_otp(void);
> +
> +#endif
> diff --git a/configs/helios64-rk3399_defconfig b/configs/helios64-rk3399_defconfig
> new file mode 100644
> index 0000000000..3b4ed62ab6
> --- /dev/null
> +++ b/configs/helios64-rk3399_defconfig
> @@ -0,0 +1,147 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +CONFIG_ENV_OFFSET=0x3F8000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_ADVANCED_RECOVERY=y
> +CONFIG_ROCKCHIP_ADVANCED_RECOVERY_LED="helios64::status"
> +# CONFIG_ROCKCHIP_ADVANCED_RECOVERY_ROCKUSB is not set
> +CONFIG_TARGET_HELIOS64=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
> +CONFIG_SPL_SPI_SUPPORT=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_USE_PREBOOT=y
> +CONFIG_CONSOLE_MUX=y
> +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-kobol-helios64.dtb"
> +CONFIG_MISC_INIT_R=y
> +CONFIG_VERSION_VARIABLE=y
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_BOARD_TYPES=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_BOARD_EARLY_INIT_R=y
> +CONFIG_LAST_STAGE_INIT=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
> +CONFIG_SPL_I2C_SUPPORT=y
> +CONFIG_SPL_POWER_SUPPORT=y
> +CONFIG_SPL_SPI_LOAD=y
> +CONFIG_TPL=y
> +CONFIG_CMD_CONFIG=y
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_BOOTM_PLAN9 is not set
> +# CONFIG_BOOTM_RTEMS is not set
> +# CONFIG_BOOTM_VXWORKS is not set
> +CONFIG_CMD_BOOTEFI_HELLO=y
> +CONFIG_CMD_BOOTMENU=y
> +CONFIG_CRC32_VERIFY=y
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_MD5SUM_VERIFY=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MX_CYCLIC=y
> +CONFIG_CMD_SHA1SUM=y
> +CONFIG_SHA1SUM_VERIFY=y
> +CONFIG_CMD_STRINGS=y
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_POWEROFF=y
> +CONFIG_CMD_READ=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_CMD_EFIDEBUG=y
> +CONFIG_CMD_EXCEPTION=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_FS_UUID=y
> +CONFIG_PARTITION_TYPE_GUID=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-kobol-helios64"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_IP_DEFRAG=y
> +# CONFIG_DM_DEVICE_REMOVE is not set
> +CONFIG_SCSI_AHCI=y
> +CONFIG_AHCI_PCI=y
> +CONFIG_SPL_FIRMWARE=y
> +CONFIG_GPIO_HOG=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_DM_PCA953X=y
> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x8
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_MISC=y
> +CONFIG_ROCKCHIP_EFUSE=y
> +CONFIG_ROCKCHIP_OTP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_DM_MDIO=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_RGMII=y
> +CONFIG_MII=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PCI=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
> +CONFIG_DM_PMIC_FAN53555=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_SPL_DM_REGULATOR=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_SPL_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_SPL_DM_REGULATOR_GPIO=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM_RK3399_LPDDR4=y
> +CONFIG_DM_RESET=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> +CONFIG_SCSI=y
> +CONFIG_DM_SCSI=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_ROCKCHIP_SPI=y
> +CONFIG_SYSRESET=y
> +CONFIG_SYSRESET_SYSCON=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_USB=y
> +# CONFIG_SPL_DM_USB is not set
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
> +CONFIG_HEXDUMP=y
> diff --git a/include/configs/helios64.h b/include/configs/helios64.h
> new file mode 100644
> index 0000000000..6fca9a6be0
> --- /dev/null
> +++ b/include/configs/helios64.h
> @@ -0,0 +1,47 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2020 Aditya Prayoga <aditya at kobol.io>
> + */
> +
> +#ifndef __HELIOS64_H
> +#define __HELIOS64_H
> +
> +#include <configs/rk3399_common.h>
> +
> +#define SDRAM_BANK_SIZE (2UL << 30)
> +
> +#if defined(CONFIG_ENV_IS_IN_MMC)
> + #define CONFIG_SYS_MMC_ENV_DEV 0
> +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
> + #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
> + #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
> + #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
> + #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
> +#endif
> +
> +
> +#ifndef CONFIG_SPL_BUILD
> +#if CONFIG_IS_ENABLED(SCSI)
> +
> + #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5
> + #define CONFIG_SYS_SCSI_MAX_LUN 1
> + #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> + CONFIG_SYS_SCSI_MAX_LUN)
> +
> + #define BOOT_TARGET_SCSI(func) \
> + func(SCSI, scsi, 0)
> +#else
> + #define BOOT_TARGET_SCSI(func)
> +#endif
> +
> +#undef BOOT_TARGET_DEVICES
> +#define BOOT_TARGET_DEVICES(func) \
> + BOOT_TARGET_MMC(func) \
> + BOOT_TARGET_USB(func) \
> + BOOT_TARGET_SCSI(func) \
> + BOOT_TARGET_PXE(func) \
> + BOOT_TARGET_DHCP(func)
> +
> +#endif
> +
> +#endif
> --
> 2.29.2
>
More information about the U-Boot
mailing list