[PATCH 1/5] risv: add missing SBI extension definitions

[Heinrich Schuchardt]

Add the System Reset Extension and the Hart State Management Extension
definitions.

Add missing RFENCE Extension enum values.

The SBI 0.1 extension constants are needed for for the sbi command. Remove
an #ifdef.

Cf. https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc

Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
---
 arch/riscv/include/asm/sbi.h | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 53ca316180..c598bb11ce 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -12,7 +12,6 @@
 #include <linux/types.h>

 enum sbi_ext_id {
-#ifdef CONFIG_SBI_V01
 	SBI_EXT_0_1_SET_TIMER = 0x0,
 	SBI_EXT_0_1_CONSOLE_PUTCHAR = 0x1,
 	SBI_EXT_0_1_CONSOLE_GETCHAR = 0x2,
@@ -22,11 +21,12 @@ enum sbi_ext_id {
 	SBI_EXT_0_1_REMOTE_SFENCE_VMA = 0x6,
 	SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID = 0x7,
 	SBI_EXT_0_1_SHUTDOWN = 0x8,
-#endif
 	SBI_EXT_BASE = 0x10,
 	SBI_EXT_TIME = 0x54494D45,
 	SBI_EXT_IPI = 0x735049,
 	SBI_EXT_RFENCE = 0x52464E43,
+	SBI_EXT_HSM = 0x48534D,
+	SBI_EXT_SRST = 0x53525354,
 };

 enum sbi_ext_base_fid {
@@ -51,6 +51,38 @@ enum sbi_ext_rfence_fid {
 	SBI_EXT_RFENCE_REMOTE_FENCE_I = 0,
 	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA,
 	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA,
+	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID,
+};
+
+enum sbi_ext_hsm_fid {
+	SBI_EXT_HSM_HART_START = 0,
+	SBI_EXT_HSM_HART_STOP,
+	SBI_EXT_HSM_HART_STATUS,
+};
+
+enum sbi_hsm_hart_status {
+	SBI_HSM_HART_STATUS_STARTED = 0,
+	SBI_HSM_HART_STATUS_STOPPED,
+	SBI_HSM_HART_STATUS_START_PENDING,
+	SBI_HSM_HART_STATUS_STOP_PENDING,
+};
+
+enum sbi_ext_srst_fid {
+	SBI_EXT_SRST_RESET = 0,
+};
+
+enum sbi_srst_reset_type {
+	SBI_SRST_RESET_TYPE_SHUTDOWN = 0,
+	SBI_SRST_RESET_TYPE_COLD_REBOOT,
+	SBI_SRST_RESET_TYPE_WARM_REBOOT,
+};
+
+enum sbi_srst_reset_reason {
+	SBI_SRST_RESET_REASON_NONE = 0,
+	SBI_SRST_RESET_REASON_SYS_FAILURE,
 };

 #ifdef CONFIG_SBI_V01
--
2.30.1