rpi: "stdout=serial,vidconsole\0"

[Heinrich Schuchardt]

Hello Matthias,

currently the UEFI sub-systems determines the width of the terminal
according to the following rules:

If stdout="vidconsole", use the size of the video console, otherwise use
the terminal size from the serial console.

So if stdout="serial,vidconsole" the size of the video is ignored.

With a patch I am about to merge the size of vidconsole will be used if
the first 10 characters of stdout are "vidconsole":

* stdout="vidconsole": use video console size
* stdout="vidconsole,serial": use video console size
* stdout="serial,vidconsole": use serial terminal size
* stdout="serial": use serial terminal size

The difference can for instance be seen when using
GRUB_TERMINAL=console. This setting allows GRUB to be displayed both on
the serial console as well as on the video console.

At least for the Raspberry Pi 400 stdout="vidconsole,serial" seems to be
the best choice as it will typically be used with a monitor.

Best regards

Heinrich