[PATCH 19/20] binman: Drop repetitive heading for each entry
Simon Glass
sjg at chromium.org
Sun Mar 7 20:31:46 CET 2021
Many entries start 'Entry containing a'. This looks fine in the source
code but is annoying when viewed in the htmldocs table of contents. Drop
these unnecessary words.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
tools/binman/entries.rst | 76 ++++++++++++++---------------
tools/binman/etype/atf_bl31.py | 2 +-
tools/binman/etype/blob.py | 2 +-
tools/binman/etype/blob_ext.py | 2 +-
tools/binman/etype/cbfs.py | 2 +-
tools/binman/etype/files.py | 2 +-
tools/binman/etype/fit.py | 2 +-
tools/binman/etype/intel_cmc.py | 2 +-
tools/binman/etype/intel_fsp.py | 2 +-
tools/binman/etype/intel_fsp_m.py | 2 +-
tools/binman/etype/intel_fsp_s.py | 2 +-
tools/binman/etype/intel_fsp_t.py | 2 +-
tools/binman/etype/intel_ifwi.py | 2 +-
tools/binman/etype/intel_me.py | 2 +-
tools/binman/etype/intel_mrc.py | 2 +-
tools/binman/etype/intel_refcode.py | 2 +-
tools/binman/etype/intel_vbt.py | 2 +-
tools/binman/etype/intel_vga.py | 2 +-
tools/binman/etype/mkimage.py | 2 +-
tools/binman/etype/scp.py | 2 +-
20 files changed, 57 insertions(+), 57 deletions(-)
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst
index cb89570d5b2..528087db6cd 100644
--- a/tools/binman/entries.rst
+++ b/tools/binman/entries.rst
@@ -11,8 +11,8 @@ features to produce new behaviours.
-Entry: atf-bl31: Entry containing an ARM Trusted Firmware (ATF) BL31 blob
--------------------------------------------------------------------------
+Entry: atf-bl31: ARM Trusted Firmware (ATF) BL31 blob
+-----------------------------------------------------
Properties / Entry arguments:
- atf-bl31-path: Filename of file to read into entry. This is typically
@@ -25,8 +25,8 @@ about ATF.
-Entry: blob: Entry containing an arbitrary binary blob
-------------------------------------------------------
+Entry: blob: Arbitrary binary blob
+----------------------------------
Note: This should not be used by itself. It is normally used as a parent
class by other entry types.
@@ -56,8 +56,8 @@ obtained from the list of available device-tree files, managed by the
-Entry: blob-ext: Entry containing an externally built binary blob
------------------------------------------------------------------
+Entry: blob-ext: Externally built binary blob
+---------------------------------------------
Note: This should not be used by itself. It is normally used as a parent
class by other entry types.
@@ -96,8 +96,8 @@ entry; similarly for SPL.
-Entry: cbfs: Entry containing a Coreboot Filesystem (CBFS)
-----------------------------------------------------------
+Entry: cbfs: Coreboot Filesystem (CBFS)
+---------------------------------------
A CBFS provides a way to group files into a group. It has a simple directory
structure and allows the position of individual files to be set, since it is
@@ -303,8 +303,8 @@ added as necessary. See the binman README.
-Entry: files: Entry containing a set of files
----------------------------------------------
+Entry: files: A set of files arranged in a section
+--------------------------------------------------
Properties / Entry arguments:
- pattern: Filename pattern to match the files to include
@@ -335,8 +335,8 @@ byte value of a region.
-Entry: fit: Entry containing a FIT
-----------------------------------
+Entry: fit: FIT
+---------------
This calls mkimage to create a FIT (U-Boot Flat Image Tree) based on the
input provided.
@@ -491,8 +491,8 @@ first/last in the entry list.
-Entry: intel-cmc: Entry containing an Intel Chipset Micro Code (CMC) file
--------------------------------------------------------------------------
+Entry: intel-cmc: Intel Chipset Micro Code (CMC) file
+-----------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -544,8 +544,8 @@ This entry contains a pointer to the FIT. It is required to be at address
-Entry: intel-fsp: Entry containing an Intel Firmware Support Package (FSP) file
--------------------------------------------------------------------------------
+Entry: intel-fsp: Intel Firmware Support Package (FSP) file
+-----------------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -561,8 +561,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-fsp-m: Entry containing Intel Firmware Support Package (FSP) memory init
--------------------------------------------------------------------------------------
+Entry: intel-fsp-m: Intel Firmware Support Package (FSP) memory init
+--------------------------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -578,8 +578,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-fsp-s: Entry containing Intel Firmware Support Package (FSP) silicon init
---------------------------------------------------------------------------------------
+Entry: intel-fsp-s: Intel Firmware Support Package (FSP) silicon init
+---------------------------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -595,8 +595,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-fsp-t: Entry containing Intel Firmware Support Package (FSP) temp ram init
----------------------------------------------------------------------------------------
+Entry: intel-fsp-t: Intel Firmware Support Package (FSP) temp ram init
+----------------------------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -611,8 +611,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-ifwi: Entry containing an Intel Integrated Firmware Image (IFWI) file
-----------------------------------------------------------------------------------
+Entry: intel-ifwi: Intel Integrated Firmware Image (IFWI) file
+--------------------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry. This is either the
@@ -645,8 +645,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-me: Entry containing an Intel Management Engine (ME) file
-----------------------------------------------------------------------
+Entry: intel-me: Intel Management Engine (ME) file
+--------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -665,8 +665,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-mrc: Entry containing an Intel Memory Reference Code (MRC) file
-----------------------------------------------------------------------------
+Entry: intel-mrc: Intel Memory Reference Code (MRC) file
+--------------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -679,8 +679,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-refcode: Entry containing an Intel Reference Code file
--------------------------------------------------------------------
+Entry: intel-refcode: Intel Reference Code file
+-----------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -693,8 +693,8 @@ See README.x86 for information about x86 binary blobs.
-Entry: intel-vbt: Entry containing an Intel Video BIOS Table (VBT) file
------------------------------------------------------------------------
+Entry: intel-vbt: Intel Video BIOS Table (VBT) file
+---------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -706,8 +706,8 @@ See README.x86 for information about Intel binary blobs.
-Entry: intel-vga: Entry containing an Intel Video Graphics Adaptor (VGA) file
------------------------------------------------------------------------------
+Entry: intel-vga: Intel Video Graphics Adaptor (VGA) file
+---------------------------------------------------------
Properties / Entry arguments:
- filename: Filename of file to read into entry
@@ -721,8 +721,8 @@ See README.x86 for information about Intel binary blobs.
-Entry: mkimage: Entry containing a binary produced by mkimage
--------------------------------------------------------------
+Entry: mkimage: Binary produced by mkimage
+------------------------------------------
Properties / Entry arguments:
- datafile: Filename for -d argument
@@ -756,8 +756,8 @@ placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
-Entry: scp: Entry containing a System Control Processor (SCP) firmware blob
----------------------------------------------------------------------------
+Entry: scp: System Control Processor (SCP) firmware blob
+--------------------------------------------------------
Properties / Entry arguments:
- scp-path: Filename of file to read into the entry, typically scp.bin
diff --git a/tools/binman/etype/atf_bl31.py b/tools/binman/etype/atf_bl31.py
index 195adc714b5..163d7141840 100644
--- a/tools/binman/etype/atf_bl31.py
+++ b/tools/binman/etype/atf_bl31.py
@@ -8,7 +8,7 @@
from binman.etype.blob_named_by_arg import Entry_blob_named_by_arg
class Entry_atf_bl31(Entry_blob_named_by_arg):
- """Entry containing an ARM Trusted Firmware (ATF) BL31 blob
+ """ARM Trusted Firmware (ATF) BL31 blob
Properties / Entry arguments:
- atf-bl31-path: Filename of file to read into entry. This is typically
diff --git a/tools/binman/etype/blob.py b/tools/binman/etype/blob.py
index e609a8b253f..018f8c9a319 100644
--- a/tools/binman/etype/blob.py
+++ b/tools/binman/etype/blob.py
@@ -11,7 +11,7 @@ from patman import tools
from patman import tout
class Entry_blob(Entry):
- """Entry containing an arbitrary binary blob
+ """Arbitrary binary blob
Note: This should not be used by itself. It is normally used as a parent
class by other entry types.
diff --git a/tools/binman/etype/blob_ext.py b/tools/binman/etype/blob_ext.py
index e372445f300..d6b0ca17c3f 100644
--- a/tools/binman/etype/blob_ext.py
+++ b/tools/binman/etype/blob_ext.py
@@ -13,7 +13,7 @@ from patman import tools
from patman import tout
class Entry_blob_ext(Entry_blob):
- """Entry containing an externally built binary blob
+ """Externally built binary blob
Note: This should not be used by itself. It is normally used as a parent
class by other entry types.
diff --git a/tools/binman/etype/cbfs.py b/tools/binman/etype/cbfs.py
index baf9c3e45b7..1daddeb8229 100644
--- a/tools/binman/etype/cbfs.py
+++ b/tools/binman/etype/cbfs.py
@@ -13,7 +13,7 @@ from binman.entry import Entry
from dtoc import fdt_util
class Entry_cbfs(Entry):
- """Entry containing a Coreboot Filesystem (CBFS)
+ """Coreboot Filesystem (CBFS)
A CBFS provides a way to group files into a group. It has a simple directory
structure and allows the position of individual files to be set, since it is
diff --git a/tools/binman/etype/files.py b/tools/binman/etype/files.py
index 1feebd0510e..5db36abef0b 100644
--- a/tools/binman/etype/files.py
+++ b/tools/binman/etype/files.py
@@ -15,7 +15,7 @@ from patman import tools
class Entry_files(Entry_section):
- """Entry containing a set of files
+ """A set of files arranged in a section
Properties / Entry arguments:
- pattern: Filename pattern to match the files to include
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py
index c4fa711b850..6936f5736a6 100644
--- a/tools/binman/etype/fit.py
+++ b/tools/binman/etype/fit.py
@@ -14,7 +14,7 @@ from dtoc.fdt import Fdt
from patman import tools
class Entry_fit(Entry):
- """Entry containing a FIT
+ """Flat Image Tree (FIT)
This calls mkimage to create a FIT (U-Boot Flat Image Tree) based on the
input provided.
diff --git a/tools/binman/etype/intel_cmc.py b/tools/binman/etype/intel_cmc.py
index 644fa421d3f..494d43c9cf9 100644
--- a/tools/binman/etype/intel_cmc.py
+++ b/tools/binman/etype/intel_cmc.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_cmc(Entry_blob_ext):
- """Entry containing an Intel Chipset Micro Code (CMC) file
+ """Intel Chipset Micro Code (CMC) file
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_fsp.py b/tools/binman/etype/intel_fsp.py
index 2ac012bce19..326cb7d09b3 100644
--- a/tools/binman/etype/intel_fsp.py
+++ b/tools/binman/etype/intel_fsp.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_fsp(Entry_blob_ext):
- """Entry containing an Intel Firmware Support Package (FSP) file
+ """Intel Firmware Support Package (FSP) file
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_fsp_m.py b/tools/binman/etype/intel_fsp_m.py
index 434b0f1856e..9bcac790ed9 100644
--- a/tools/binman/etype/intel_fsp_m.py
+++ b/tools/binman/etype/intel_fsp_m.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_fsp_m(Entry_blob_ext):
- """Entry containing Intel Firmware Support Package (FSP) memory init
+ """Intel Firmware Support Package (FSP) memory init
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_fsp_s.py b/tools/binman/etype/intel_fsp_s.py
index 564e1228bba..1d5046d452b 100644
--- a/tools/binman/etype/intel_fsp_s.py
+++ b/tools/binman/etype/intel_fsp_s.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_fsp_s(Entry_blob_ext):
- """Entry containing Intel Firmware Support Package (FSP) silicon init
+ """Intel Firmware Support Package (FSP) silicon init
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_fsp_t.py b/tools/binman/etype/intel_fsp_t.py
index df0c5fbee0f..80d95cc6f9c 100644
--- a/tools/binman/etype/intel_fsp_t.py
+++ b/tools/binman/etype/intel_fsp_t.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_fsp_t(Entry_blob_ext):
- """Entry containing Intel Firmware Support Package (FSP) temp ram init
+ """Intel Firmware Support Package (FSP) temp ram init
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_ifwi.py b/tools/binman/etype/intel_ifwi.py
index c2ede641aa5..903d39bdbeb 100644
--- a/tools/binman/etype/intel_ifwi.py
+++ b/tools/binman/etype/intel_ifwi.py
@@ -13,7 +13,7 @@ from dtoc import fdt_util
from patman import tools
class Entry_intel_ifwi(Entry_blob_ext):
- """Entry containing an Intel Integrated Firmware Image (IFWI) file
+ """Intel Integrated Firmware Image (IFWI) file
Properties / Entry arguments:
- filename: Filename of file to read into entry. This is either the
diff --git a/tools/binman/etype/intel_me.py b/tools/binman/etype/intel_me.py
index a6fe5427f31..b93ebabdc9e 100644
--- a/tools/binman/etype/intel_me.py
+++ b/tools/binman/etype/intel_me.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_me(Entry_blob_ext):
- """Entry containing an Intel Management Engine (ME) file
+ """Intel Management Engine (ME) file
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_mrc.py b/tools/binman/etype/intel_mrc.py
index ccbb046519d..bb8b26ff686 100644
--- a/tools/binman/etype/intel_mrc.py
+++ b/tools/binman/etype/intel_mrc.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_mrc(Entry_blob_ext):
- """Entry containing an Intel Memory Reference Code (MRC) file
+ """Intel Memory Reference Code (MRC) file
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_refcode.py b/tools/binman/etype/intel_refcode.py
index 5ead08b2be4..9112730a9a4 100644
--- a/tools/binman/etype/intel_refcode.py
+++ b/tools/binman/etype/intel_refcode.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_refcode(Entry_blob_ext):
- """Entry containing an Intel Reference Code file
+ """Intel Reference Code file
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_vbt.py b/tools/binman/etype/intel_vbt.py
index 2a98c123688..8afd576600c 100644
--- a/tools/binman/etype/intel_vbt.py
+++ b/tools/binman/etype/intel_vbt.py
@@ -7,7 +7,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_vbt(Entry_blob_ext):
- """Entry containing an Intel Video BIOS Table (VBT) file
+ """Intel Video BIOS Table (VBT) file
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/intel_vga.py b/tools/binman/etype/intel_vga.py
index a103f1ce0ee..51e6465f0d0 100644
--- a/tools/binman/etype/intel_vga.py
+++ b/tools/binman/etype/intel_vga.py
@@ -8,7 +8,7 @@
from binman.etype.blob_ext import Entry_blob_ext
class Entry_intel_vga(Entry_blob_ext):
- """Entry containing an Intel Video Graphics Adaptor (VGA) file
+ """Intel Video Graphics Adaptor (VGA) file
Properties / Entry arguments:
- filename: Filename of file to read into entry
diff --git a/tools/binman/etype/mkimage.py b/tools/binman/etype/mkimage.py
index f8c491d5d0a..e9f82729ab4 100644
--- a/tools/binman/etype/mkimage.py
+++ b/tools/binman/etype/mkimage.py
@@ -12,7 +12,7 @@ from dtoc import fdt_util
from patman import tools
class Entry_mkimage(Entry):
- """Entry containing a binary produced by mkimage
+ """Binary produced by mkimage
Properties / Entry arguments:
- datafile: Filename for -d argument
diff --git a/tools/binman/etype/scp.py b/tools/binman/etype/scp.py
index 93f8787d2d7..a9bee3ce8bc 100644
--- a/tools/binman/etype/scp.py
+++ b/tools/binman/etype/scp.py
@@ -7,7 +7,7 @@
from binman.etype.blob_named_by_arg import Entry_blob_named_by_arg
class Entry_scp(Entry_blob_named_by_arg):
- """Entry containing a System Control Processor (SCP) firmware blob
+ """System Control Processor (SCP) firmware blob
Properties / Entry arguments:
- scp-path: Filename of file to read into the entry, typically scp.bin
--
2.30.1.766.gb4fecdf3b7-goog
More information about the U-Boot
mailing list