[RFC/RFT 0/7] arm: meson: static ethernet init cleanup

[Neil Armstrong]

On 25/02/2021 09:44, Neil Armstrong wrote:
> This serie finally removes the static ethernet link setup, MDIO mux & memory
> power domain after introduction of :
>  - "net: add MMIO Register MDIO MUX driver" at [1]
>  - "net: designware: add DM_MDIO support" at [2]
>  - "net: add Amlogic Meson G12A MDIO MUX driver" at [3]
>  - "net: designware: add Amlogic Meson8b & later glue driver" at [4]
> 
> These patches makes all this happen automagically thanks to DM_MDIO introduced
> last year.
> 
> This has been tested on libretech-ac and Khadas VIM3 to check to most opposite
> setups, but the GXBB boards hasn't been tested.
> 
> Note, you'll need [1], [2], [3], [4] applied before these patches
> 
> [1] https://patchwork.ozlabs.org/project/uboot/patch/20210224140223.2617536-1-narmstrong@baylibre.com/
> [2] https://patchwork.ozlabs.org/project/uboot/patch/20210224140239.2617642-1-narmstrong@baylibre.com/
> [3] https://patchwork.ozlabs.org/project/uboot/patch/20210224163153.2678768-1-narmstrong@baylibre.com/
> [4] https://patchwork.ozlabs.org/project/uboot/patch/20210224193356.2948805-1-narmstrong@baylibre.com/
> 
> Neil Armstrong (7):
>   configs: update Amlogic Meson GXL & GXM config for MDIO MUX
>   configs: update Amlogic Meson G12A, G12B & SM1 configs for MDIO MUX
>   arm: meson: remove static MDIO mux handling
>   configs: meson: use Designware glue driver for Amlogic Meson8b & later
>     SoCs
>   net: designware: remove amlogic compatibles
>   arm: meson: remove static ethernet memory power domain enable
>   arm: meson: remove static ethernet link setup
> 
>  arch/arm/include/asm/arch-meson/axg.h       | 22 -------
>  arch/arm/include/asm/arch-meson/eth.h       | 12 ----
>  arch/arm/include/asm/arch-meson/g12a.h      | 35 -----------
>  arch/arm/include/asm/arch-meson/gx.h        | 20 ------
>  arch/arm/mach-meson/board-axg.c             | 34 -----------
>  arch/arm/mach-meson/board-g12a.c            | 67 ---------------------
>  arch/arm/mach-meson/board-gx.c              | 48 ---------------
>  board/amlogic/beelink-s922x/beelink-s922x.c |  2 -
>  board/amlogic/odroid-n2/odroid-n2.c         |  2 -
>  board/amlogic/p200/p200.c                   |  2 -
>  board/amlogic/p201/p201.c                   |  2 -
>  board/amlogic/p212/p212.c                   |  3 -
>  board/amlogic/q200/q200.c                   |  2 -
>  board/amlogic/s400/s400.c                   |  2 -
>  board/amlogic/sei510/sei510.c               |  3 -
>  board/amlogic/sei610/sei610.c               |  3 -
>  board/amlogic/u200/u200.c                   |  3 +-
>  board/amlogic/vim3/vim3.c                   |  2 -
>  board/amlogic/w400/w400.c                   |  2 +-
>  configs/beelink-gtking_defconfig            |  5 +-
>  configs/beelink-gtkingpro_defconfig         |  5 +-
>  configs/khadas-vim2_defconfig               |  5 +-
>  configs/khadas-vim3_defconfig               |  5 +-
>  configs/khadas-vim3l_defconfig              |  5 +-
>  configs/khadas-vim_defconfig                |  7 ++-
>  configs/libretech-ac_defconfig              |  7 ++-
>  configs/libretech-cc_defconfig              |  7 ++-
>  configs/libretech-cc_v2_defconfig           |  7 ++-
>  configs/libretech-s905d-pc_defconfig        |  5 +-
>  configs/libretech-s912-pc_defconfig         |  5 +-
>  configs/nanopi-k2_defconfig                 |  2 +-
>  configs/odroid-c2_defconfig                 |  2 +-
>  configs/odroid-c4_defconfig                 |  5 +-
>  configs/odroid-n2_defconfig                 |  5 +-
>  configs/p200_defconfig                      |  2 +-
>  configs/p201_defconfig                      |  2 +-
>  configs/p212_defconfig                      |  7 ++-
>  configs/s400_defconfig                      |  2 +-
>  configs/sei510_defconfig                    |  7 ++-
>  configs/sei610_defconfig                    |  7 ++-
>  configs/u200_defconfig                      |  7 ++-
>  configs/wetek-core2_defconfig               |  5 +-
>  drivers/net/designware.c                    |  3 -
>  43 files changed, 79 insertions(+), 306 deletions(-)
> 

Applied to u-boot-amlogic-next