[PATCH 3/4] stm32mp: stm32prog: reactivate console and display serial error

Patrice CHOTARD patrice.chotard at foss.st.com
Tue Mar 9 14:11:29 CET 2021


Hi Patrick

On 2/25/21 1:37 PM, Patrick Delaunay wrote:
> When serial instance is not found in device tree, the console
> should be enabled and the error should be indicated.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/cpu.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
> index a453f89d02..527b6290de 100644
> --- a/arch/arm/mach-stm32mp/cpu.c
> +++ b/arch/arm/mach-stm32mp/cpu.c
> @@ -476,11 +476,17 @@ static void setup_boot_mode(void)
>  			break;
>  		/* serial : search associated alias in devicetree */
>  		sprintf(cmd, "serial@%x", serial_addr[instance]);
> -		if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev))
> -			break;
> -		if (fdtdec_get_alias_seq(gd->fdt_blob, "serial",
> -					 dev_of_offset(dev), &alias))
> +		if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev) ||
> +		    fdtdec_get_alias_seq(gd->fdt_blob, "serial",
> +					 dev_of_offset(dev), &alias)) {
> +			/* restore console on error */
> +			if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL))
> +				gd->flags &= ~(GD_FLG_SILENT |
> +					       GD_FLG_DISABLE_CONSOLE);
> +			printf("serial%d = %s not found in device tree!\n",
> +			       instance, cmd);
>  			break;
> +		}
>  		sprintf(cmd, "%d", alias);
>  		env_set("boot_device", "serial");
>  		env_set("boot_instance", cmd);
> 


Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice


More information about the U-Boot mailing list