[PATCH 4/9] board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
Patrice CHOTARD
patrice.chotard at foss.st.com
Tue Mar 9 15:04:35 CET 2021
Hi Jagan
one remark below
On 2/28/21 4:52 PM, Jagan Teki wrote:
> Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
> Evaluation Board.
>
> Genaral features:
> - LCD 7" C.Touch
> - microSD slot
> - Ethernet 1Gb
> - Wifi/BT
> - 2x LVDS Full HD interfaces
> - 3x USB 2.0
> - 1x USB 3.0
> - HDMI Out
> - Mini PCIe
> - MIPI CSI
> - 2x CAN
> - Audio Out
>
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
>
> i.Core STM32MP1 needs to mount on top of this Evaluation board for
> creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> arch/arm/dts/Makefile | 1 +
> ...mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi | 51 ++++++
> .../stm32mp157a-icore-stm32mp1-edimm2.2.dts | 47 ++++++
> .../stm32mp157a-icore-stm32mp1-u-boot.dtsi | 146 ++++++++++++++++++
> arch/arm/mach-stm32mp/Kconfig | 20 +++
> board/engicam/stm32mp1/Kconfig | 12 ++
> board/engicam/stm32mp1/MAINTAINERS | 6 +
> board/engicam/stm32mp1/Makefile | 10 ++
> board/engicam/stm32mp1/spl.c | 48 ++++++
> board/engicam/stm32mp1/stm32mp1.c | 131 ++++++++++++++++
> ...tm32mp15-icore-stm32mp1-edimm2.2_defconfig | 80 ++++++++++
> 11 files changed, 552 insertions(+)
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
> create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
> create mode 100644 board/engicam/stm32mp1/Kconfig
> create mode 100644 board/engicam/stm32mp1/MAINTAINERS
> create mode 100644 board/engicam/stm32mp1/Makefile
> create mode 100644 board/engicam/stm32mp1/spl.c
> create mode 100644 board/engicam/stm32mp1/stm32mp1.c
> create mode 100644 configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index f478f6f18f..f4a48c65e8 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -979,6 +979,7 @@ dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
> dtb-$(CONFIG_STM32MP15x) += \
> stm32mp157a-dk1.dtb \
> stm32mp157a-avenger96.dtb \
> + stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
> stm32mp157c-dk2.dtb \
> stm32mp157c-ed1.dtb \
> stm32mp157c-ev1.dtb \
> diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
> new file mode 100644
> index 0000000000..96fe461235
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
> + * Copyright (c) 2020 Amarula Solutions(India)
> + * Author: Jagan Teki <jagan at amarulasolutions.com>
> + */
> +
> +#include "stm32mp157a-icore-stm32mp1-u-boot.dtsi"
> +
> +/{
> + aliases {
> + mmc0 = &sdmmc1;
> + };
> +
> + chosen {
> + stdout-path = &uart4;
> + };
> +};
> +
> +&sdmmc1 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&sdmmc1_b4_pins_a {
> + u-boot,dm-pre-reloc;
> +
> + pins1 {
> + u-boot,dm-pre-reloc;
> + };
> +
> + pins2 {
> + u-boot,dm-pre-reloc;
> + };
> +};
> +
> +&uart4 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&uart4_pins_a {
> + u-boot,dm-pre-reloc;
> +
> + pins1 {
> + u-boot,dm-pre-reloc;
> + };
> +
> + pins2 {
> + u-boot,dm-pre-reloc;
> + bias-pull-up;
> + };
> +};
> diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
> new file mode 100644
> index 0000000000..ec9f1d1cd5
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
> @@ -0,0 +1,47 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
> + * Copyright (c) 2020 Engicam srl
> + * Copyright (c) 2020 Amarula Solutons(India)
> + */
> +
> +/dts-v1/;
> +#include "stm32mp157.dtsi"
> +#include "stm32mp157a-icore-stm32mp1.dtsi"
> +#include "stm32mp15-pinctrl.dtsi"
> +#include "stm32mp15xxaa-pinctrl.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit";
> + compatible = "engicam,icore-stm32mp1-edimm2.2",
> + "engicam,icore-stm32mp1", "st,stm32mp157";
> +
> + aliases {
> + serial0 = &uart4;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&sdmmc1 {
> + bus-width = <4>;
> + disable-wp;
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc1_b4_pins_a>;
> + pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
> + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> + st,neg-edge;
> + vmmc-supply = <&v3v3>;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default", "sleep", "idle";
> + pinctrl-0 = <&uart4_pins_a>;
> + pinctrl-1 = <&uart4_sleep_pins_a>;
> + pinctrl-2 = <&uart4_idle_pins_a>;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
> new file mode 100644
> index 0000000000..d62c24d4ce
> --- /dev/null
> +++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
> + * Copyright (c) 2020 Amarula Solutions(India)
> + * Author: Jagan Teki <jagan at amarulasolutions.com>
> + */
> +
> +#include <dt-bindings/clock/stm32mp1-clksrc.h>
> +#include "stm32mp15-u-boot.dtsi"
> +#include "stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi"
> +
> +&vddcore {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&vdd {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&vdd_usb {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&vdda {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&vdd_ddr {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&vtt_ddr {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&vref_ddr {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&vdd_sd {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&v3v3 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&v2v8 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&v1v8 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&rcc {
> + st,clksrc = <
> + CLK_MPU_PLL1P
> + CLK_AXI_PLL2P
> + CLK_MCU_PLL3P
> + CLK_PLL12_HSE
> + CLK_PLL3_HSE
> + CLK_PLL4_HSE
> + CLK_RTC_LSE
> + CLK_MCO1_DISABLED
> + CLK_MCO2_DISABLED
> + >;
> +
> + st,clkdiv = <
> + 1 /*MPU*/
> + 0 /*AXI*/
> + 0 /*MCU*/
> + 1 /*APB1*/
> + 1 /*APB2*/
> + 1 /*APB3*/
> + 1 /*APB4*/
> + 2 /*APB5*/
> + 23 /*RTC*/
> + 0 /*MCO1*/
> + 0 /*MCO2*/
> + >;
> +
> + st,pkcs = <
> + CLK_CKPER_HSE
> + CLK_FMC_ACLK
> + CLK_QSPI_ACLK
> + CLK_ETH_DISABLED
> + CLK_SDMMC12_PLL4P
> + CLK_DSI_DSIPLL
> + CLK_STGEN_HSE
> + CLK_USBPHY_HSE
> + CLK_SPI2S1_PLL3Q
> + CLK_SPI2S23_PLL3Q
> + CLK_SPI45_HSI
> + CLK_SPI6_HSI
> + CLK_I2C46_HSI
> + CLK_SDMMC3_PLL4P
> + CLK_USBO_USBPHY
> + CLK_ADC_CKPER
> + CLK_CEC_LSE
> + CLK_I2C12_HSI
> + CLK_I2C35_HSI
> + CLK_UART1_HSI
> + CLK_UART24_HSI
> + CLK_UART35_HSI
> + CLK_UART6_HSI
> + CLK_UART78_HSI
> + CLK_SPDIF_PLL4P
> + CLK_FDCAN_PLL4R
> + CLK_SAI1_PLL3Q
> + CLK_SAI2_PLL3Q
> + CLK_SAI3_PLL3Q
> + CLK_SAI4_PLL3Q
> + CLK_RNG1_LSI
> + CLK_RNG2_LSI
> + CLK_LPTIM1_PCLK1
> + CLK_LPTIM23_PCLK3
> + CLK_LPTIM45_LSE
> + >;
> +
> + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
> + pll2: st,pll at 1 {
> + compatible = "st,stm32mp1-pll";
> + reg = <1>;
> + cfg = < 2 65 1 0 0 PQR(1,1,1) >;
> + frac = < 0x1400 >;
> + u-boot,dm-pre-reloc;
> + };
> +
> + /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
> + pll3: st,pll at 2 {
> + compatible = "st,stm32mp1-pll";
> + reg = <2>;
> + cfg = < 1 33 1 16 36 PQR(1,1,1) >;
> + frac = < 0x1a04 >;
> + u-boot,dm-pre-reloc;
> + };
> +
> + /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
> + pll4: st,pll at 3 {
> + compatible = "st,stm32mp1-pll";
> + reg = <3>;
> + cfg = < 3 98 5 7 7 PQR(1,1,1) >;
> + u-boot,dm-pre-reloc;
> + };
> +};
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index 79ffd5191d..5a2123063a 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -77,6 +77,25 @@ config TARGET_ST_STM32MP15x
> Evalulation board (EV1) or Discovery board (DK1 and DK2).
> The difference between board are managed with devicetree
>
> +config TARGET_ICORE_STM32MP1
> + bool "Engicam i.Core STM32MP1 SOM"
> + select STM32MP15x
> + imply BOOTCOUNT_LIMIT
> + imply BOOTSTAGE
> + imply CMD_BOOTCOUNT
> + imply CMD_BOOTSTAGE
> + imply CMD_CLS if CMD_BMP
> + imply DISABLE_CONSOLE
> + imply PRE_CONSOLE_BUFFER
> + imply SILENT_CONSOLE
> + help
> + i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A.
> +
> + i.Core STM32MP1 EDIMM2.2:
> + * EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
> + * i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
> + creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
> +
> config TARGET_DH_STM32MP1_PDK2
> bool "DH STM32MP1 PDK2"
> select STM32MP15x
> @@ -177,6 +196,7 @@ config DEBUG_UART_CLOCK
> default 64000000
> endif
>
> +source "board/engicam/stm32mp1/Kconfig"
> source "board/st/stm32mp1/Kconfig"
> source "board/dhelectronics/dh_stm32mp1/Kconfig"
>
> diff --git a/board/engicam/stm32mp1/Kconfig b/board/engicam/stm32mp1/Kconfig
> new file mode 100644
> index 0000000000..e7bccc09fb
> --- /dev/null
> +++ b/board/engicam/stm32mp1/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_ICORE_STM32MP1
> +
> +config SYS_BOARD
> + default "stm32mp1"
> +
> +config SYS_VENDOR
> + default "engicam"
> +
> +config SYS_CONFIG_NAME
> + default "stm32mp1"
> +
> +endif
> diff --git a/board/engicam/stm32mp1/MAINTAINERS b/board/engicam/stm32mp1/MAINTAINERS
> new file mode 100644
> index 0000000000..3230a7a6e8
> --- /dev/null
> +++ b/board/engicam/stm32mp1/MAINTAINERS
> @@ -0,0 +1,6 @@
> +i.Core-STM32MP1-EDIMM2.2
> +M: Jagan Teki <jagan at amarulasolutions.com>
> +M: Matteo Lisi <matteo.lisi at engicam.com>
> +S: Maintained
> +F: board/engicam/stm32mp1
> +F: configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
> diff --git a/board/engicam/stm32mp1/Makefile b/board/engicam/stm32mp1/Makefile
> new file mode 100644
> index 0000000000..65560df290
> --- /dev/null
> +++ b/board/engicam/stm32mp1/Makefile
> @@ -0,0 +1,10 @@
> +# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +#
> +# Copyright (C) 2018, STMicroelectronics - All Rights Reserved
> +#
> +
> +ifdef CONFIG_SPL_BUILD
> +obj-y += spl.o
> +else
> +obj-y += stm32mp1.o
> +endif
> diff --git a/board/engicam/stm32mp1/spl.c b/board/engicam/stm32mp1/spl.c
> new file mode 100644
> index 0000000000..79adb5f529
> --- /dev/null
> +++ b/board/engicam/stm32mp1/spl.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
> + * Copyright (C) 2020 Engicam S.r.l.
> + * Copyright (C) 2020 Amarula Solutions(India)
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +
> +/* board early initialisation in board_f: need to use global variable */
> +static u32 opp_voltage_mv __section(".data");
> +
> +void board_vddcore_init(u32 voltage_mv)
> +{
> + if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER_SUPPORT))
> + opp_voltage_mv = voltage_mv;
> +}
> +
> +int board_early_init_f(void)
> +{
> + return 0;
> +}
> +
> +#ifdef CONFIG_DEBUG_UART_BOARD_INIT
> +void board_debug_uart_init(void)
> +{
> +#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)
> +
> +#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
> +#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
> +
> + /* UART4 clock enable */
> + setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
> +
> +#define GPIOG_BASE 0x50008000
> + /* GPIOG clock enable */
> + writel(BIT(6), RCC_MP_AHB4ENSETR);
> + /* GPIO configuration for ST boards: Uart4 TX = G11 */
> + writel(0xffbfffff, GPIOG_BASE + 0x00);
> + writel(0x00006000, GPIOG_BASE + 0x24);
> +#else
> +
> +#error("CONFIG_DEBUG_UART_BASE: not supported value")
> +
> +#endif
> +}
> +#endif
> diff --git a/board/engicam/stm32mp1/stm32mp1.c b/board/engicam/stm32mp1/stm32mp1.c
> new file mode 100644
> index 0000000000..2bd71a8fd7
> --- /dev/null
> +++ b/board/engicam/stm32mp1/stm32mp1.c
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
> + * Copyright (C) 2020 Engicam S.r.l.
> + * Copyright (C) 2020 Amarula Solutions(India)
> + * Author: Jagan Teki <jagan at amarulasolutions.com>
> + */
> +
> +#include <common.h>
> +#include <env.h>
> +#include <env_internal.h>
> +#include <syscon.h>
> +#include <asm/io.h>
> +#include <asm/arch/sys_proto.h>
> +#include <power/regulator.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int board_early_init_f(void)
> +{
> + /* nothing to do, only used in SPL */
> + return 0;
> +}
As board_early_init_f() is empty here and also in /board/engicam/stm32mp1/spl.c, it can be removed
and compilation flag CONFIG_BOARD_EARLY_INIT_F as well.
Patrice
> +
> +int checkboard(void)
> +{
> + char *mode;
> + const char *fdt_compat;
> + int fdt_compat_len;
> +
> + if (IS_ENABLED(CONFIG_TFABOOT))
> + mode = "trusted";
> + else
> + mode = "basic";
> +
> + printf("Board: stm32mp1 in %s mode", mode);
> + fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible",
> + &fdt_compat_len);
> + if (fdt_compat && fdt_compat_len)
> + printf(" (%s)", fdt_compat);
> + puts("\n");
> +
> + return 0;
> +}
> +
> +/* board dependent setup after realloc */
> +int board_init(void)
> +{
> + /* address of boot parameters */
> + gd->bd->bi_boot_params = STM32_DDR_BASE + 0x100;
> +
> + if (IS_ENABLED(CONFIG_DM_REGULATOR))
> + regulators_enable_boot_on(_DEBUG);
> +
> + return 0;
> +}
> +
> +int board_late_init(void)
> +{
> + return 0;
> +}
> +
> +enum env_location env_get_location(enum env_operation op, int prio)
> +{
> + u32 bootmode = get_bootmode();
> +
> + if (prio)
> + return ENVL_UNKNOWN;
> +
> + switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
> + case BOOT_FLASH_SD:
> + case BOOT_FLASH_EMMC:
> + if (CONFIG_IS_ENABLED(ENV_IS_IN_MMC))
> + return ENVL_MMC;
> + else if (CONFIG_IS_ENABLED(ENV_IS_IN_EXT4))
> + return ENVL_EXT4;
> + else
> + return ENVL_NOWHERE;
> +
> + case BOOT_FLASH_NAND:
> + case BOOT_FLASH_SPINAND:
> + if (CONFIG_IS_ENABLED(ENV_IS_IN_UBI))
> + return ENVL_UBI;
> + else
> + return ENVL_NOWHERE;
> +
> + case BOOT_FLASH_NOR:
> + if (CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH))
> + return ENVL_SPI_FLASH;
> + else
> + return ENVL_NOWHERE;
> +
> + default:
> + return ENVL_NOWHERE;
> + }
> +}
> +
> +const char *env_ext4_get_intf(void)
> +{
> + u32 bootmode = get_bootmode();
> +
> + switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
> + case BOOT_FLASH_SD:
> + case BOOT_FLASH_EMMC:
> + return "mmc";
> + default:
> + return "";
> + }
> +}
> +
> +const char *env_ext4_get_dev_part(void)
> +{
> + static char *const dev_part[] = {"0:auto", "1:auto", "2:auto"};
> + u32 bootmode = get_bootmode();
> +
> + return dev_part[(bootmode & TAMP_BOOT_INSTANCE_MASK) - 1];
> +}
> +
> +int mmc_get_env_dev(void)
> +{
> + u32 bootmode = get_bootmode();
> +
> + return (bootmode & TAMP_BOOT_INSTANCE_MASK) - 1;
> +}
> +
> +#if defined(CONFIG_OF_BOARD_SETUP)
> +int ft_board_setup(void *blob, struct bd_info *bd)
> +{
> + return 0;
> +}
> +#endif
> diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
> new file mode 100644
> index 0000000000..48cf207f4c
> --- /dev/null
> +++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
> @@ -0,0 +1,80 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_STM32MP=y
> +CONFIG_SYS_MALLOC_F_LEN=0x3000
> +CONFIG_SYS_MEMTEST_START=0xc0000000
> +CONFIG_SYS_MEMTEST_END=0xc4000000
> +CONFIG_ENV_OFFSET=0x280000
> +CONFIG_SPL_TEXT_BASE=0x2FFC2500
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL=y
> +CONFIG_TARGET_ICORE_STM32MP1=y
> +CONFIG_ENV_OFFSET_REDUND=0x2C0000
> +# CONFIG_ARMV7_VIRT is not set
> +CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-icore-stm32mp1-edimm2.2"
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_FIT=y
> +CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
> +CONFIG_SPL_ENV_SUPPORT=y
> +CONFIG_SPL_I2C_SUPPORT=y
> +CONFIG_SPL_POWER_SUPPORT=y
> +CONFIG_SYS_PROMPT="STM32MP> "
> +CONFIG_CMD_ADTIMG=y
> +CONFIG_CMD_ERASEENV=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_FUSE=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_REMOTEPROC=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_TIMER=y
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_EXT4_WRITE=y
> +# CONFIG_SPL_DOS_PARTITION is not set
> +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
> +CONFIG_ENV_IS_NOWHERE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +# CONFIG_SPL_ENV_IS_NOWHERE is not set
> +CONFIG_DM_HWSPINLOCK=y
> +CONFIG_HWSPINLOCK_STM32=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_STM32F7=y
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_DM_MAILBOX=y
> +CONFIG_STM32_IPCC=y
> +CONFIG_STM32_FMC2_EBI=y
> +CONFIG_DM_MMC=y
> +CONFIG_SUPPORT_EMMC_BOOT=y
> +CONFIG_STM32_SDMMC2=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_DWC_ETH_QOS=y
> +CONFIG_PHY=y
> +CONFIG_PINCONF=y
> +# CONFIG_SPL_PINCTRL_FULL is not set
> +CONFIG_PINCTRL_STMFX=y
> +CONFIG_DM_PMIC=y
> +# CONFIG_SPL_PMIC_CHILDREN is not set
> +CONFIG_PMIC_STPMIC1=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_REMOTEPROC_STM32_COPRO=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_STM32=y
> +CONFIG_SERIAL_RX_BUFFER=y
> +CONFIG_WDT=y
> +CONFIG_WDT_STM32MP=y
> +CONFIG_LZO=y
> +CONFIG_ERRNO_STR=y
>
More information about the U-Boot
mailing list