[PATCH v2 18/21] test: dm: Add a test case for simple-bus <ranges>

[Bin Meng]

This adds a test case to verify reading <ranges> of a simple-bus is
working as expected.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>

---

Changes in v2:
- default y if SANDBOX for CONFIG_SIMPLE_BUS_CORRECT_RANGE

 drivers/core/Kconfig |  1 +
 test/dm/Makefile     |  1 +
 test/dm/simple-bus.c | 33 +++++++++++++++++++++++++++++++++
 3 files changed, 35 insertions(+)
 create mode 100644 test/dm/simple-bus.c

diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index c7504edaf8..a7c3120860 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -238,6 +238,7 @@ config SPL_SIMPLE_BUS
 config SIMPLE_BUS_CORRECT_RANGE
 	bool "Decode the 'simple-bus' <range> by honoring the #address-cells and #size-cells"
 	depends on SIMPLE_BUS
+	default y if SANDBOX
 	help
 	  Decoding the 'simple-bus' <range> by honoring the #address-cells
 	  and #size-cells of parent/child bus. If unset, #address-cells of
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 1c2fa95f4a..d0d46e7f7e 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_DM_MDIO) += mdio.o
 obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
 obj-$(CONFIG_DM_RNG) += rng.o
 obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
+obj-$(CONFIG_SIMPLE_BUS) += simple-bus.o
 obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
 obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
 obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o
diff --git a/test/dm/simple-bus.c b/test/dm/simple-bus.c
new file mode 100644
index 0000000000..3530b47fac
--- /dev/null
+++ b/test/dm/simple-bus.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021, Bin Meng <bmeng.cn at gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/test.h>
+#include <dm/simple_bus.h>
+#include <dm/uclass-internal.h>
+#include <test/ut.h>
+
+static int dm_test_simple_bus(struct unit_test_state *uts)
+{
+	struct udevice *dev;
+	struct simple_bus_plat *plat;
+
+	/* locate the dummy device @ translation-test node */
+	ut_assertok(uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 0, &dev));
+	ut_asserteq_str("dev at 0,0", dev->name);
+
+	/* locate the parent node which is a simple-bus */
+	ut_assertnonnull(dev = dev_get_parent(dev));
+	ut_asserteq_str("translation-test at 8000", dev->name);
+
+	ut_assertnonnull(plat = dev_get_uclass_plat(dev));
+	ut_asserteq(0, plat->base);
+	ut_asserteq(0x8000, plat->target);
+	ut_asserteq(0x1000, plat->size);
+
+	return 0;
+}
+DM_TEST(dm_test_simple_bus, UT_TESTF_SCAN_FDT | UT_TESTF_FLAT_TREE);
-- 
2.25.1