[PATCH v2 5/9] board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0

[Patrick DELAUNAY]

Hi Jagan,

On 3/15/21 6:32 PM, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
>
> i.Core STM32MP1 needs to mount on top of this Carrier board for
> creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
>
> Linux dts commit details:
>
> commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
> C.TOUCH 2.0")
>
> Add support for it.
>
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Changes for v2:
> - collect Patrice r-b
> - add linux dts commit
> - drop CONFIG_BOARD_EARLY_INIT_F
>
>   arch/arm/dts/Makefile                         |  1 +
>   ...2mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi | 51 ++++++++++++
>   .../stm32mp157a-icore-stm32mp1-ctouch2.dts    | 47 +++++++++++
>   arch/arm/mach-stm32mp/Kconfig                 |  5 ++
>   board/engicam/stm32mp1/MAINTAINERS            |  6 ++
>   ...stm32mp15-icore-stm32mp1-ctouch2_defconfig | 79 +++++++++++++++++++
>   6 files changed, 189 insertions(+)
>   create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
>   create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
>   create mode 100644 configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
>

Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>

Thanks
Patrick