[PATCH] Revert "mmc: sdhci: set to INT_DATA_END when there are data"

[Yuezhang.Mo at sony.com]

This reverts commit 17ea3c862865c0d704646f67dbf8412f9ff54f59.

In eMMC specification, for the response-with-busy(R1b, R5b)
command, the DAT0 will driven to LOW as BUSY status, and in
sdhci specification, the transfer complete bit should be wait
for BUSY status de-assert.

All response-with-busy commands don't contain data, the data
judgement is no need.

Signed-off-by: Yuezhang.Mo <Yuezhang.Mo at sony.com>
---
 drivers/mmc/sdhci.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index d9ab6a0a83..8568f65b18 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -258,8 +258,7 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 		flags = SDHCI_CMD_RESP_LONG;
 	else if (cmd->resp_type & MMC_RSP_BUSY) {
 		flags = SDHCI_CMD_RESP_SHORT_BUSY;
-		if (data)
-			mask |= SDHCI_INT_DATA_END;
+		mask |= SDHCI_INT_DATA_END;
 	} else
 		flags = SDHCI_CMD_RESP_SHORT;
 
-- 
2.25.1