[PATCH v1 2/6] net: mv88e61xx: Configure PHY ports to also pass packets between them

[Lukasz Majewski]

After this change PHY ports are able to pass packets between them (and
also to CPU port).

The Kconfig variable - CONFIG_MV88E61XX_PHY_PORTS - is used to get the
PHY ports of the switch and generate proper mask.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---

 drivers/net/phy/mv88e61xx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 69a1dd8f1859..14074c0b82fb 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -873,14 +873,19 @@ static int mv88e61xx_phy_setup(struct phy_device *phydev, u8 phy)
 
 static int mv88e61xx_phy_config_port(struct phy_device *phydev, u8 phy)
 {
+	struct mv88e61xx_phy_priv *priv = phydev->priv;
+	u16 port_mask;
 	int val;
 
 	val = mv88e61xx_port_enable(phydev, phy);
 	if (val < 0)
 		return val;
 
-	val = mv88e61xx_port_set_vlan(phydev, phy,
-			1 << CONFIG_MV88E61XX_CPU_PORT);
+	port_mask = PORT_MASK(priv->port_count) & CONFIG_MV88E61XX_PHY_PORTS;
+	port_mask &= ~(1 << phy);
+	port_mask |= (1 << CONFIG_MV88E61XX_CPU_PORT);
+
+	val = mv88e61xx_port_set_vlan(phydev, phy, port_mask);
 	if (val < 0)
 		return val;
 
-- 
2.20.1