Ficus EE not working / supported ?

[Ezequiel Garcia]

Hi Mani,

Have you had any chance to look at this?

Thanks!
Ezequiel

On Tue, 16 Mar 2021 at 09:44, Ezequiel Garcia
<ezequiel at vanguardiasur.com.ar> wrote:
>
> Hi Mani, Kever,
>
> I tried to bringup (again) my Ficus board, but I've been unable to
> boot a kernel.
>
> Seems my old u-boot branch doesn't want to boot, and the only U-Boot I managed
> to boot is some recent one (which I guess is better than having an ancient one).
>
> Now, doc/board/rockchip/rockchip.rst mentions TPL but Ficus defconfig
> isn't updated
> to use that. So I'm using rock960-rk3399_defconfig, with ethernet enabled,
> the issue is I can't boot any kernel with that. Seems it hangs up very early,
> and doesn't even want to output anything on earlyconsole.
>
> I was wondering if maybe this rings a bell? Maybe DDR setup?
>
> U-Boot TPL 2021.01-dirty (Mar 15 2021 - 17:46:11)
> Channel 0: DDR3, 800MHz
> BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
> Channel 1: DDR3, 800MHz
> BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
> 256B stride
> Trying to boot from BOOTROM
> Returning to boot ROM...
>
> U-Boot SPL 2021.01-dirty (Mar 15 2021 - 17:46:11 -0300)
> Trying to boot from MMC1
> cannot find image node 'atf_1': -1
>
>
> U-Boot 2021.01-dirty (Mar 15 2021 - 17:46:11 -0300)
>
> SoC: Rockchip rk3399
> Reset cause: POR
> Model: 96boards RK3399 Ficus
> DRAM:  2 GiB
> PMIC:  RK808
> MMC:   mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
> Loading Environment from MMC... *** Warning - bad CRC, using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> Model: 96boards RK3399 Ficus
> Net:
> Warning: ethernet at fe300000 (eth0) using random MAC address - f2:a3:4d:58:42:dd
> eth0: ethernet at fe300000
> starting USB...
> ....
> ....
> rock960 => setenv ipaddr 192.168.0.20
> rock960 => setenv ipaddr 192.168.0.200
> rock960 => setenv bootcmd "tftpboot 0x02000000 rk3399-ficus/Image;
> tftpboot 0x01f00000 rk3399-ficus/rk3399-ficus.dtb; booti 0x02000000 -
> 0x01f00000"
> rock960 => boot
> Speed: 1000, full duplex
> Using ethernet at fe300000 device
> TFTP from server 192.168.0.20; our IP address is 192.168.0.200
> Filename 'rk3399-ficus/Image'.
> Load address: 0x2000000
> Loading: #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ##############
> 5.1 MiB/s
> done
> Bytes transferred = 9736704 (949200 hex)
> Speed: 1000, full duplex
> Using ethernet at fe300000 device
> TFTP from server 192.168.0.20; our IP address is 192.168.0.200
> Filename 'rk3399-ficus/rk3399-ficus.dtb'.
> Load address: 0x1f00000
> Loading: ####
> 3.7 MiB/s
> done
> Bytes transferred = 50911 (c6df hex)
> Moving Image from 0x2000000 to 0x2080000, end=2a1f000
> ## Flattened Device Tree blob at 01f00000
>    Booting using the fdt blob at 0x1f00000
> Host not halted after 16000 microseconds.
>    Loading Device Tree to 0000000079f16000, end 0000000079f256de ... OK
>
> Starting kernel ...
>
> Thanks,
> Ezequiel