[PATCH v7 1/2] gpio: i2c-gpio: Drop use of dm_gpio_set_dir()
Simon Glass
sjg at chromium.org
Tue Mar 23 02:52:06 CET 2021
This is the only driver that uses this function. Update it to use the
alternative which is dm_gpio_clrset_flags().
Signed-off-by: Simon Glass <sjg at chromium.org>
Tested-by: Harm Berntsen <harm.berntsen at nedap.com>
---
Changes in v7:
- Update commit message to mention dm_gpio_clrset_flags()
Changes in v6:
- Use dm_gpio_clrset_flags() so that direction can be changed
- Simplify the code since masking is not needed
drivers/i2c/i2c-gpio.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/i2c-gpio.c b/drivers/i2c/i2c-gpio.c
index a301a4460b3..cf8f8f40359 100644
--- a/drivers/i2c/i2c-gpio.c
+++ b/drivers/i2c/i2c-gpio.c
@@ -48,12 +48,13 @@ static int i2c_gpio_sda_get(struct i2c_gpio_bus *bus)
static void i2c_gpio_sda_set(struct i2c_gpio_bus *bus, int bit)
{
struct gpio_desc *sda = &bus->gpios[PIN_SDA];
+ ulong flags;
if (bit)
- sda->flags = (sda->flags & ~GPIOD_IS_OUT) | GPIOD_IS_IN;
+ flags = GPIOD_IS_IN;
else
- sda->flags = (sda->flags & (~GPIOD_IS_IN & ~GPIOD_IS_OUT_ACTIVE)) | GPIOD_IS_OUT;
- dm_gpio_set_dir(sda);
+ flags = GPIOD_IS_OUT;
+ dm_gpio_clrset_flags(sda, GPIOD_MASK_DIR, flags);
}
static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
@@ -62,16 +63,14 @@ static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
int count = 0;
if (bit) {
- scl->flags = (scl->flags & ~GPIOD_IS_OUT) | GPIOD_IS_IN;
- dm_gpio_set_dir(scl);
+ dm_gpio_clrset_flags(scl, GPIOD_MASK_DIR, GPIOD_IS_IN);
while (!dm_gpio_get_value(scl) && count++ < 100000)
udelay(1);
if (!dm_gpio_get_value(scl))
pr_err("timeout waiting on slave to release scl\n");
} else {
- scl->flags = (scl->flags & (~GPIOD_IS_IN & ~GPIOD_IS_OUT_ACTIVE)) | GPIOD_IS_OUT;
- dm_gpio_set_dir(scl);
+ dm_gpio_clrset_flags(scl, GPIOD_MASK_DIR, GPIOD_IS_OUT);
}
}
@@ -79,11 +78,11 @@ static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
static void i2c_gpio_scl_set_output_only(struct i2c_gpio_bus *bus, int bit)
{
struct gpio_desc *scl = &bus->gpios[PIN_SCL];
- scl->flags = (scl->flags & (~GPIOD_IS_IN & ~GPIOD_IS_OUT_ACTIVE)) | GPIOD_IS_OUT;
+ ulong flags = GPIOD_IS_OUT;
if (bit)
- scl->flags |= GPIOD_IS_OUT_ACTIVE;
- dm_gpio_set_dir(scl);
+ flags |= GPIOD_IS_OUT_ACTIVE;
+ dm_gpio_clrset_flags(scl, GPIOD_MASK_DIR, flags);
}
static void i2c_gpio_write_bit(struct i2c_gpio_bus *bus, int delay, uchar bit)
--
2.31.0.rc2.261.g7f71774620-goog
More information about the U-Boot
mailing list