SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94
Manuel Luís Reis
mluis.reis at gmail.com
Tue Mar 23 14:20:43 CET 2021
> The change may be dedicated to sama5d2 devices. Could you have a look
> please if your device (sama5d3) needs this change as well ? I mean, does
> doing something similar for sama5d3 fixes your problem ?
I am not quite sure how to check what you suggest to be honest.
The commit you've sent seems to be board independent ->
mach-at91/spl_atmel.c. Doesn't it apply to all of the at91 boards, sama5d3
inclusive?
I don't see where else I could make a change like that.
Thanks for your patience.
On Tue, 23 Mar 2021 at 11:38, <Eugen.Hristev at microchip.com> wrote:
> On 3/23/21 1:28 PM, Manuel Luís Reis wrote:
>
> > Hi,
> >
> > Thanks for your reply.
> >
> > > Can you please check if this commit is in your tree, or, if the same
> has
> > > to be applied in your case (sama5d3), to make it work ?
> >
> > I've got that change in my tree, but I'm still getting the error message.
>
> The change may be dedicated to sama5d2 devices. Could you have a look
> please if your device (sama5d3) needs this change as well ? I mean, does
> doing something similar for sama5d3 fixes your problem ?
>
> Thanks,
> Eugen
>
> >
> > I am using up-to-date mainline U-Boot.
> >
> > Thanks
> >
> >
> >
> > On Tue, 23 Mar 2021 at 11:14, <Eugen.Hristev at microchip.com
> > <mailto:Eugen.Hristev at microchip.com>> wrote:
> >
> > Hi,
> >
> > Can you please check if this commit is in your tree, or, if the same
> > has
> > to be applied in your case (sama5d3), to make it work ?
> >
> > Here is the commit :
> >
> >
> >
> https://source.denx.de/u-boot/custodians/u-boot-atmel/-/commit/786f35b619ddbfb88e4532d11a56413f5dab473f
> >
> >
> >
> > On 3/23/21 1:06 PM, Manuel Luís Reis wrote:
> > > Hello,
> > >
> > > I've been having issues with SPL booting in the SAMA5D3 Xplained
> > board
> > > getting the following error, with up-to-date mainline U-boot and
> > > sama5d3_xplained _mmc_defconfig:
> > >
> > > -----------------------------------------------
> > > RomBOOT
> > >
> > > <debug_uart>
> > > Could not initialize timer (err -19)
> > > .....
> > > -----------------------------------------------
> > >
> > > I could trace back the error to commit 4b2be78.
> > >
> > > This topic has been raised before on
> > >
> >
> http://u-boot.10912.n7.nabble.com/PATCH-v2-time-Fix-get-ticks-being-non-monotonic-td426172.html
> > > Tried the suggestions there with the same result.
> > >
> > > I'm am not too knowledgeable with U-Boot nor this board. Could
> > you shed
> > > some light on this? Any pointers would be appreciated.
> > >
> > > Let me know if you require additional information.
> > >
> > > Cheers,
> > > Manuel
> > >
> > > Output from dm_dump_all():
> > >
> > > Class Index Probed Driver Name
> > > -----------------------------------------------------------
> > > root 0 [ + ] root_driver root_driver
> > > simple_bus 0 [ ] simple_bus `-- ahb
> > > simple_bus 1 [ ] simple_bus `-- apb
> > > mmc 0 [ ] atmel-mci |-- mmc at f0000000
> > > blk 0 [ ] mmc_blk | `-- mmc at f0000000.blk
> > > mmc 1 [ ] atmel-mci |-- mmc at f8000000
> > > blk 1 [ ] mmc_blk | `-- mmc at f8000000.blk
> > > serial 0 [ ] serial_atmel |-- serial at ffffee00
> > > pinctrl 0 [ ] atmel_sama5d3_pinctrl |--
> > pinctrl at fffff200
> > > pinconfig 0 [ ] pinconfig | |-- dbgu
> > > pinconfig 1 [ ] pinconfig | | `-- dbgu-0
> > > pinconfig 2 [ ] pinconfig | |-- mmc0
> > > pinconfig 3 [ ] pinconfig | | |--
> > mmc0_clk_cmd_dat0
> > > pinconfig 4 [ ] pinconfig | | |-- mmc0_dat1_3
> > > pinconfig 5 [ ] pinconfig | | `-- mmc0_dat4_7
> > > pinconfig 6 [ ] pinconfig | |-- mmc1
> > > pinconfig 7 [ ] pinconfig | | |--
> > mmc1_clk_cmd_dat0
> > > pinconfig 8 [ ] pinconfig | | `-- mmc1_dat1_3
> > > pinconfig 9 [ ] pinconfig | |-- spi0
> > > pinconfig 10 [ ] pinconfig | | `-- spi0-0
> > > pinconfig 11 [ ] pinconfig | |-- spi1
> > > pinconfig 12 [ ] pinconfig | | `-- spi1-0
> > > pinconfig 13 [ ] pinconfig | `-- board
> > > pinconfig 14 [ ] pinconfig | |-- mmc0_cd
> > > pinconfig 15 [ ] pinconfig | `-- mmc1_cd
> > > gpio 0 [ ] atmel_at91rm9200_gpio |--
> gpio at fffff200
> > > gpio 1 [ ] atmel_at91rm9200_gpio |--
> gpio at fffff400
> > > gpio 2 [ ] atmel_at91rm9200_gpio |--
> gpio at fffff600
> > > gpio 3 [ ] atmel_at91rm9200_gpio |--
> gpio at fffff800
> > > gpio 4 [ ] atmel_at91rm9200_gpio |--
> gpio at fffffa00
> > > simple_bus 2 [ ] at91-pmc `-- pmc at fffffc00
> > > clk 0 [ ] at91sam9x5-utmi-clk |-- utmick
> > > clk 1 [ ] at91-master-clk |-- masterck
> > > misc 0 [ ] sam9x5-periph-clk `-- periphck
> > > clk 2 [ ] periph-clk |-- dbgu_clk at 2
> > > clk 3 [ ] periph-clk |-- pioA_clk at 6
> > > clk 4 [ ] periph-clk |-- pioB_clk at 7
> > > clk 5 [ ] periph-clk |-- pioC_clk at 8
> > > clk 6 [ ] periph-clk |-- pioD_clk at 9
> > > clk 7 [ ] periph-clk |-- pioE_clk at 10
> > > clk 8 [ ] periph-clk |-- mci0_clk at 21
> > > clk 9 [ ] periph-clk |-- mci1_clk at 22
> > > clk 10 [ ] periph-clk |-- spi0_clk at 24
> > > clk 11 [ ] periph-clk `-- spi1_clk at 25
> > > Could not initialize timer (err -19)
> > >
> >
>
>
More information about the U-Boot
mailing list