[PATCH v1 2/5] net: phy: marvell: extend 88E2110 to use both 2.5GHz modes

[Stefan Roese]

From: Marcin Wojtas <mw at semihalf.com>

Allow 88E2110 to configure advertisements for both
SGMII @2.5Ghz and 2500BaseX modes.

Signed-off-by: Marcin Wojtas <mw at semihalf.com>
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins at marvell.com>
Reviewed-by: Kostya Porotchkin <kostap at marvell.com>
Reviewed-by: Stefan Chulski <stefanc at marvell.com>
Reviewed-by: Nadav Haklai <nadavh at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---

 drivers/net/phy/marvell.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index c3f86d98f9e3..2e08bf3e2f79 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -630,7 +630,8 @@ static int m88e2110_config(struct phy_device *phydev)
 		/* Disabled 10G advertisement */
 		phy_write(phydev, 7, 0x20, 0x1e1);
 	} else {
-		if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) {
+		if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500 ||
+		    phydev->interface == PHY_INTERFACE_MODE_2500BASEX) {
 			/* Disabled 10G/5G advertisements */
 			phy_write(phydev, 7, 0x20, 0xa1);
 		} else {
-- 
2.31.0