[PATCH v1 02/23] phy: marvell: rename comphy related definitions to COMPHY_XX
Stefan Roese
sr at denx.de
Wed Mar 24 15:06:28 CET 2021
From: Igal Liberman <igall at marvell.com>
Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX.
Those definition might be confused with MDIO PHY definitions.
This patch does the following changes:
- PHY_TYPE_XX --> COMPHY_TYPE_XX
- PHY_SPEED_XX --> COMPHY_SPEED_XX
This improves readability, no functional change.
Signed-off-by: Igal Liberman <igall at marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---
arch/arm/dts/armada-3720-db.dts | 8 +-
arch/arm/dts/armada-3720-espressobin.dts | 12 +-
arch/arm/dts/armada-3720-turris-mox.dts | 12 +-
arch/arm/dts/armada-3720-uDPU.dts | 23 ++--
arch/arm/dts/armada-7040-db-nand.dts | 24 ++--
arch/arm/dts/armada-7040-db.dts | 22 ++--
arch/arm/dts/armada-8040-clearfog-gt-8k.dts | 30 ++---
arch/arm/dts/armada-8040-db.dts | 24 ++--
arch/arm/dts/armada-8040-mcbin.dts | 27 +++--
arch/arm/dts/armada-8040-puzzle-m801.dts | 32 ++---
arch/arm/dts/cn9130-crb-A.dts | 16 +--
arch/arm/dts/cn9130-crb-B.dts | 16 +--
board/CZ.NIC/turris_mox/turris_mox.c | 8 +-
drivers/phy/marvell/comphy_a3700.c | 70 +++++------
drivers/phy/marvell/comphy_core.c | 14 +--
drivers/phy/marvell/comphy_cp110.c | 124 +++++++++++---------
drivers/phy/marvell/comphy_mux.c | 10 +-
include/dt-bindings/comphy/comphy_data.h | 90 +++++++-------
18 files changed, 288 insertions(+), 274 deletions(-)
diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
index 1b1b66b94de6..fd1892ac8106 100644
--- a/arch/arm/dts/armada-3720-db.dts
+++ b/arch/arm/dts/armada-3720-db.dts
@@ -70,13 +70,13 @@
&comphy {
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
- phy-speed = <PHY_SPEED_2_5G>;
+ phy-type = <COMPHY_TYPE_PEX0>;
+ phy-speed = <COMPHY_SPEED_2_5G>;
};
phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
};
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 96a4b3d95b88..3cea5218d2b3 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -83,18 +83,18 @@
&comphy {
max-lanes = <3>;
phy0 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_PEX0>;
+ phy-speed = <COMPHY_SPEED_2_5G>;
};
phy1 {
- phy-type = <PHY_TYPE_PEX0>;
- phy-speed = <PHY_SPEED_2_5G>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy2 {
- phy-type = <PHY_TYPE_SATA0>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_SATA0>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
};
diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index 974270cc8c68..8e0ebf508d44 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -73,18 +73,18 @@
&comphy {
max-lanes = <3>;
phy0 {
- phy-type = <PHY_TYPE_SGMII1>;
- phy-speed = <PHY_SPEED_3_125G>;
+ phy-type = <COMPHY_TYPE_SGMII1>;
+ phy-speed = <COMPHY_SPEED_3_125G>;
};
phy1 {
- phy-type = <PHY_TYPE_PEX0>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_PEX0>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy2 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
};
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 7f4b8222f4af..4b30f3cea8c7 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -108,18 +108,19 @@
&comphy {
phy0 {
- phy-type = <PHY_TYPE_SGMII1>;
- phy-speed = <PHY_SPEED_3_125G>;
+ phy-type = <COMPHY_TYPE_SGMII1>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
+ };
+
+ phy1 {
+ phy-type = <COMPHY_TYPE_SGMII0>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
+ };
+
+ phy2 {
+ phy-type = <COMPHY_TYPE_USB3_HOST1>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
- phy1 {
- phy-type = <PHY_TYPE_SGMII0>;
- phy-speed = <PHY_SPEED_3_125G>;
- };
-
- phy2 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
- phy-speed = <PHY_SPEED_5G>;
- };
};
ð0 {
diff --git a/arch/arm/dts/armada-7040-db-nand.dts b/arch/arm/dts/armada-7040-db-nand.dts
index f249c71f6561..ccf470b317f1 100644
--- a/arch/arm/dts/armada-7040-db-nand.dts
+++ b/arch/arm/dts/armada-7040-db-nand.dts
@@ -129,33 +129,33 @@
&cp0_comphy {
phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
+ phy-type = <COMPHY_TYPE_SGMII2>;
+ phy-speed = <COMPHY_SPEED_3_125G>;
};
phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy2 {
- phy-type = <PHY_TYPE_SGMII0>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII0>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_SATA1>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy4 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_USB3_HOST1>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_PEX2>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
};
diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index 6037f12f0e9f..f475fb361071 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -122,32 +122,32 @@
&cp0_comphy {
phy0 {
- phy-type = <PHY_TYPE_SGMII1>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII1>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy2 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_SATA1>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy4 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_USB3_HOST1>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- phy-speed = <PHY_SPEED_5G>;
+ phy-type = <COMPHY_TYPE_PEX2>;
+ phy-speed = <COMPHY_SPEED_5G>;
};
};
diff --git a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
index 86df6ac0b202..ce5832c2fbd7 100644
--- a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
@@ -160,22 +160,22 @@
* Lane 5: Not connected
*/
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
+ phy-type = <COMPHY_TYPE_UNCONNECTED>;
};
phy2 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy3 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
+ phy-type = <COMPHY_TYPE_UNCONNECTED>;
};
phy4 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
+ phy-type = <COMPHY_TYPE_USB3_HOST1>;
};
phy5 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
+ phy-type = <COMPHY_TYPE_UNCONNECTED>;
};
};
@@ -272,25 +272,25 @@
* Lane 5: SGMII2 - Connected to Topaz switch
*/
phy0 {
- phy-type = <PHY_TYPE_SATA1>;
- phy-invert = <PHY_POLARITY_RXD_INVERT>;
+ phy-type = <COMPHY_TYPE_SATA1>;
+ phy-invert = <COMPHY_POLARITY_RXD_INVERT>;
};
phy1 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
+ phy-type = <COMPHY_TYPE_UNCONNECTED>;
};
phy2 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
};
phy3 {
- phy-type = <PHY_TYPE_SGMII1>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII1>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
phy4 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
+ phy-type = <COMPHY_TYPE_UNCONNECTED>;
};
phy5 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
+ phy-type = <COMPHY_TYPE_SGMII2>;
+ phy-speed = <COMPHY_SPEED_3_125G>;
};
};
diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index a2b7c992a406..1edfaab682eb 100644
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -89,22 +89,22 @@
* Lane 5: PCIe2 (x1)
*/
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_SATA0>;
+ phy-type = <COMPHY_TYPE_SATA0>;
};
phy2 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy3 {
- phy-type = <PHY_TYPE_SATA1>;
+ phy-type = <COMPHY_TYPE_SATA1>;
};
phy4 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
+ phy-type = <COMPHY_TYPE_USB3_HOST1>;
};
phy5 {
- phy-type = <PHY_TYPE_PEX2>;
+ phy-type = <COMPHY_TYPE_PEX2>;
};
};
@@ -188,22 +188,22 @@
* Lane 5: PCIe2 (x1)
*/
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_SATA0>;
+ phy-type = <COMPHY_TYPE_SATA0>;
};
phy2 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy3 {
- phy-type = <PHY_TYPE_SATA1>;
+ phy-type = <COMPHY_TYPE_SATA1>;
};
phy4 {
- phy-type = <PHY_TYPE_PEX1>;
+ phy-type = <COMPHY_TYPE_PEX1>;
};
phy5 {
- phy-type = <PHY_TYPE_PEX2>;
+ phy-type = <COMPHY_TYPE_PEX2>;
};
};
diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
index b0a36e328bc9..98a582df26fe 100644
--- a/arch/arm/dts/armada-8040-mcbin.dts
+++ b/arch/arm/dts/armada-8040-mcbin.dts
@@ -171,22 +171,22 @@
* Lane 5: SATA1
*/
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy2 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy3 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy4 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy5 {
- phy-type = <PHY_TYPE_SATA1>;
+ phy-type = <COMPHY_TYPE_SATA1>;
};
};
@@ -286,22 +286,23 @@
* Lane 5: SGMII3
*/
phy0 {
- phy-type = <PHY_TYPE_SGMII1>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII1>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
phy1 {
- phy-type = <PHY_TYPE_SATA0>;
+ phy-type = <COMPHY_TYPE_SATA0>;
};
phy2 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
};
phy3 {
- phy-type = <PHY_TYPE_SATA1>;
+ phy-type = <COMPHY_TYPE_SATA1>;
};
phy4 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy5 {
- phy-type = <PHY_TYPE_SGMII3>;
+ phy-type = <COMPHY_TYPE_SGMII3>;
+ phy-speed = <COMPHY_SPEED_3_125G>;
};
};
diff --git a/arch/arm/dts/armada-8040-puzzle-m801.dts b/arch/arm/dts/armada-8040-puzzle-m801.dts
index ff46ce50cbc7..0becc4ff0d34 100644
--- a/arch/arm/dts/armada-8040-puzzle-m801.dts
+++ b/arch/arm/dts/armada-8040-puzzle-m801.dts
@@ -220,24 +220,24 @@
* Lane 5: SATA1
*/
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII2>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
phy2 {
- phy-type = <PHY_TYPE_SATA0>;
+ phy-type = <COMPHY_TYPE_SATA0>;
};
phy3 {
- phy-type = <PHY_TYPE_SGMII1>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII1>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
phy4 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy5 {
- phy-type = <PHY_TYPE_SATA1>;
+ phy-type = <COMPHY_TYPE_SATA1>;
};
};
@@ -367,23 +367,23 @@
* Lane 5: SGMII2
*/
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy2 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
};
phy3 {
- phy-type = <PHY_TYPE_SGMII1>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII1>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
phy4 {
- phy-type = <PHY_TYPE_SFI>;
+ phy-type = <COMPHY_TYPE_SFI>;
};
phy5 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_1_25G>;
+ phy-type = <COMPHY_TYPE_SGMII2>;
+ phy-speed = <COMPHY_SPEED_1_25G>;
};
};
diff --git a/arch/arm/dts/cn9130-crb-A.dts b/arch/arm/dts/cn9130-crb-A.dts
index fa21ef314cba..5c5e0fb2eb1e 100644
--- a/arch/arm/dts/cn9130-crb-A.dts
+++ b/arch/arm/dts/cn9130-crb-A.dts
@@ -15,29 +15,29 @@
&cp0_comphy {
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy2 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy3 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy4 {
- phy-type = <PHY_TYPE_SFI>;
- phy-speed = <PHY_SPEED_10_3125G>;
+ phy-type = <COMPHY_TYPE_SFI>;
+ phy-speed = <COMPHY_SPEED_10_3125G>;
};
phy5 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
+ phy-type = <COMPHY_TYPE_SGMII2>;
+ phy-speed = <COMPHY_SPEED_3_125G>;
};
};
diff --git a/arch/arm/dts/cn9130-crb-B.dts b/arch/arm/dts/cn9130-crb-B.dts
index 7cb587ada826..6041084a2c87 100644
--- a/arch/arm/dts/cn9130-crb-B.dts
+++ b/arch/arm/dts/cn9130-crb-B.dts
@@ -15,29 +15,29 @@
&cp0_comphy {
phy0 {
- phy-type = <PHY_TYPE_PEX0>;
+ phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-type = <COMPHY_TYPE_USB3_HOST0>;
};
phy2 {
- phy-type = <PHY_TYPE_SATA0>;
+ phy-type = <COMPHY_TYPE_SATA0>;
};
phy3 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
+ phy-type = <COMPHY_TYPE_USB3_HOST1>;
};
phy4 {
- phy-type = <PHY_TYPE_SFI>;
- phy-speed = <PHY_SPEED_10_3125G>;
+ phy-type = <COMPHY_TYPE_SFI>;
+ phy-speed = <COMPHY_SPEED_10_3125G>;
};
phy5 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
+ phy-type = <COMPHY_TYPE_SGMII2>;
+ phy-speed = <COMPHY_SPEED_3_125G>;
};
};
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 486680a49e88..15cbf92550e6 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -216,13 +216,13 @@ int comphy_update_map(struct comphy_map *serdes_map, int count)
if (sfpindex >= 0 && swindex >= 0) {
if (sfpindex < swindex)
- serdes_map[0].speed = PHY_SPEED_1_25G;
+ serdes_map[0].speed = COMPHY_SPEED_1_25G;
else
- serdes_map[0].speed = PHY_SPEED_3_125G;
+ serdes_map[0].speed = COMPHY_SPEED_3_125G;
} else if (sfpindex >= 0) {
- serdes_map[0].speed = PHY_SPEED_1_25G;
+ serdes_map[0].speed = COMPHY_SPEED_1_25G;
} else if (swindex >= 0) {
- serdes_map[0].speed = PHY_SPEED_3_125G;
+ serdes_map[0].speed = COMPHY_SPEED_3_125G;
}
return 0;
diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
index 12523d18a805..06822d1d12e0 100644
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -17,33 +17,33 @@
DECLARE_GLOBAL_DATA_PTR;
struct comphy_mux_data a3700_comphy_mux_data[] = {
-/* Lane 0 */
+ /* Lane 0 */
{
4,
{
- { PHY_TYPE_UNCONNECTED, 0x0 },
- { PHY_TYPE_SGMII1, 0x0 },
- { PHY_TYPE_USB3_HOST0, 0x1 },
- { PHY_TYPE_USB3_DEVICE, 0x1 }
+ { COMPHY_TYPE_UNCONNECTED, 0x0 },
+ { COMPHY_TYPE_SGMII1, 0x0 },
+ { COMPHY_TYPE_USB3_HOST0, 0x1 },
+ { COMPHY_TYPE_USB3_DEVICE, 0x1 }
}
},
-/* Lane 1 */
+ /* Lane 1 */
{
3,
{
- { PHY_TYPE_UNCONNECTED, 0x0},
- { PHY_TYPE_SGMII0, 0x0},
- { PHY_TYPE_PEX0, 0x1}
+ { COMPHY_TYPE_UNCONNECTED, 0x0},
+ { COMPHY_TYPE_SGMII0, 0x0},
+ { COMPHY_TYPE_PEX0, 0x1}
}
},
-/* Lane 2 */
+ /* Lane 2 */
{
4,
{
- { PHY_TYPE_UNCONNECTED, 0x0},
- { PHY_TYPE_SATA0, 0x0},
- { PHY_TYPE_USB3_HOST0, 0x1},
- { PHY_TYPE_USB3_DEVICE, 0x1}
+ { COMPHY_TYPE_UNCONNECTED, 0x0},
+ { COMPHY_TYPE_SATA0, 0x0},
+ { COMPHY_TYPE_USB3_HOST0, 0x1},
+ { COMPHY_TYPE_USB3_DEVICE, 0x1}
}
},
};
@@ -228,10 +228,10 @@ static int comphy_pcie_power_up(u32 speed, u32 invert)
/*
* 10. Check the Polarity invert bit
*/
- if (invert & PHY_POLARITY_TXD_INVERT)
+ if (invert & COMPHY_POLARITY_TXD_INVERT)
reg_set16(phy_addr(PCIE, SYNC_PATTERN), phy_txd_inv, 0);
- if (invert & PHY_POLARITY_RXD_INVERT)
+ if (invert & COMPHY_POLARITY_RXD_INVERT)
reg_set16(phy_addr(PCIE, SYNC_PATTERN), phy_rxd_inv, 0);
/*
@@ -284,10 +284,10 @@ static int comphy_sata_power_up(u32 invert)
/*
* 0. Check the Polarity invert bits
*/
- if (invert & PHY_POLARITY_TXD_INVERT)
+ if (invert & COMPHY_POLARITY_TXD_INVERT)
data |= bs_txd_inv;
- if (invert & PHY_POLARITY_RXD_INVERT)
+ if (invert & COMPHY_POLARITY_RXD_INVERT)
data |= bs_rxd_inv;
reg_set_indirect(vphy_sync_pattern_reg, data, bs_txd_inv | bs_rxd_inv);
@@ -465,10 +465,10 @@ static int comphy_usb3_power_up(u32 lane, u32 type, u32 speed, u32 invert)
/*
* 9. Check the Polarity invert bit
*/
- if (invert & PHY_POLARITY_TXD_INVERT)
+ if (invert & COMPHY_POLARITY_TXD_INVERT)
usb3_reg_set16(SYNC_PATTERN, phy_txd_inv, 0, lane);
- if (invert & PHY_POLARITY_RXD_INVERT)
+ if (invert & COMPHY_POLARITY_RXD_INVERT)
usb3_reg_set16(SYNC_PATTERN, phy_rxd_inv, 0, lane);
/*
@@ -513,7 +513,7 @@ static int comphy_usb3_power_up(u32 lane, u32 type, u32 speed, u32 invert)
* Set Soft ID for Host mode (Device mode works with Hard ID
* detection)
*/
- if (type == PHY_TYPE_USB3_HOST0) {
+ if (type == COMPHY_TYPE_USB3_HOST0) {
/*
* set BIT0: set ID_MODE of Host/Device = "Soft ID" (BIT1)
* clear BIT1: set SOFT_ID = Host
@@ -685,8 +685,8 @@ static void comphy_sgmii_phy_init(u32 lane, u32 speed)
* comparison to 3.125 Gbps values. These register values are
* stored in "sgmii_phy_init_fix" array.
*/
- if ((speed != PHY_SPEED_1_25G) &&
- (sgmii_phy_init_fix[fix_idx].addr == addr)) {
+ if (speed != COMPHY_SPEED_1_25G &&
+ sgmii_phy_init_fix[fix_idx].addr == addr) {
/* Use new value */
val = sgmii_phy_init_fix[fix_idx].value;
if (fix_idx < fix_arr_sz)
@@ -737,13 +737,13 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
* 7. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide
* COMPHY bit rate
*/
- if (speed == PHY_SPEED_3_125G) { /* 3.125 GHz */
+ if (speed == COMPHY_SPEED_3_125G) { /* 3.125 GHz */
reg_set(COMPHY_PHY_CFG1_ADDR(lane),
(0x8 << rf_gen_rx_sel_shift) |
(0x8 << rf_gen_tx_sel_shift),
rf_gen_rx_select | rf_gen_tx_select);
- } else if (speed == PHY_SPEED_1_25G) { /* 1.25 GHz */
+ } else if (speed == COMPHY_SPEED_1_25G) { /* 1.25 GHz */
reg_set(COMPHY_PHY_CFG1_ADDR(lane),
(0x6 << rf_gen_rx_sel_shift) |
(0x6 << rf_gen_tx_sel_shift),
@@ -819,7 +819,7 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
* registers are OK.
*/
debug("Running C-DPI phy init %s mode\n",
- speed == PHY_SPEED_3_125G ? "2G5" : "1G");
+ speed == COMPHY_SPEED_3_125G ? "2G5" : "1G");
if (get_ref_clk() == 40)
comphy_sgmii_phy_init(lane, speed);
@@ -837,10 +837,10 @@ static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert)
/*
* 18. Check the PHY Polarity invert bit
*/
- if (invert & PHY_POLARITY_TXD_INVERT)
+ if (invert & COMPHY_POLARITY_TXD_INVERT)
reg_set16(sgmiiphy_addr(lane, SYNC_PATTERN), phy_txd_inv, 0);
- if (invert & PHY_POLARITY_RXD_INVERT)
+ if (invert & COMPHY_POLARITY_RXD_INVERT)
reg_set16(sgmiiphy_addr(lane, SYNC_PATTERN), phy_rxd_inv, 0);
/*
@@ -976,30 +976,30 @@ int comphy_a3700_init(struct chip_serdes_phy_config *chip_cfg,
comphy_map->type, comphy_map->invert);
switch (comphy_map->type) {
- case PHY_TYPE_UNCONNECTED:
+ case COMPHY_TYPE_UNCONNECTED:
continue;
break;
- case PHY_TYPE_PEX0:
+ case COMPHY_TYPE_PEX0:
ret = comphy_pcie_power_up(comphy_map->speed,
comphy_map->invert);
break;
- case PHY_TYPE_USB3_HOST0:
- case PHY_TYPE_USB3_DEVICE:
+ case COMPHY_TYPE_USB3_HOST0:
+ case COMPHY_TYPE_USB3_DEVICE:
ret = comphy_usb3_power_up(lane,
comphy_map->type,
comphy_map->speed,
comphy_map->invert);
break;
- case PHY_TYPE_SGMII0:
- case PHY_TYPE_SGMII1:
+ case COMPHY_TYPE_SGMII0:
+ case COMPHY_TYPE_SGMII1:
ret = comphy_sgmii_power_up(lane, comphy_map->speed,
comphy_map->invert);
break;
- case PHY_TYPE_SATA0:
+ case COMPHY_TYPE_SATA0:
ret = comphy_sata_power_up(comphy_map->invert);
break;
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index cffceb1395bb..f1f061d7c116 100644
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -29,7 +29,7 @@ static const char *get_speed_string(u32 speed)
"6.25 Gbps", "10.31 Gbps"
};
- if (speed < 0 || speed > PHY_SPEED_MAX)
+ if (speed < 0 || speed > COMPHY_SPEED_MAX)
return "invalid";
return speed_strings[speed];
@@ -46,7 +46,7 @@ static const char *get_type_string(u32 type)
"RXAUI0", "RXAUI1", "SFI", "IGNORE"
};
- if (type < 0 || type > PHY_TYPE_MAX)
+ if (type < 0 || type > COMPHY_TYPE_MAX)
return "invalid";
return type_strings[type];
@@ -59,7 +59,7 @@ void comphy_print(struct chip_serdes_phy_config *chip_cfg,
for (lane = 0; lane < chip_cfg->comphy_lanes_count;
lane++, comphy_map_data++) {
- if (comphy_map_data->speed == PHY_SPEED_INVALID) {
+ if (comphy_map_data->speed == COMPHY_SPEED_INVALID) {
printf("Comphy-%d: %-13s\n", lane,
get_type_string(comphy_map_data->type));
} else {
@@ -136,16 +136,16 @@ static int comphy_probe(struct udevice *dev)
continue;
comphy_map_data[lane].speed = fdtdec_get_int(
- blob, subnode, "phy-speed", PHY_TYPE_INVALID);
+ blob, subnode, "phy-speed", COMPHY_TYPE_INVALID);
comphy_map_data[lane].type = fdtdec_get_int(
- blob, subnode, "phy-type", PHY_SPEED_INVALID);
+ blob, subnode, "phy-type", COMPHY_SPEED_INVALID);
comphy_map_data[lane].invert = fdtdec_get_int(
- blob, subnode, "phy-invert", PHY_POLARITY_NO_INVERT);
+ blob, subnode, "phy-invert", COMPHY_POLARITY_NO_INVERT);
comphy_map_data[lane].clk_src = fdtdec_get_bool(blob, subnode,
"clk-src");
comphy_map_data[lane].end_point = fdtdec_get_bool(blob, subnode,
"end_point");
- if (comphy_map_data[lane].type == PHY_TYPE_INVALID) {
+ if (comphy_map_data[lane].type == COMPHY_TYPE_INVALID) {
printf("no phy type for lane %d, setting lane as unconnected\n",
lane + 1);
}
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index a323de7c76d0..e4ab90121c74 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -74,35 +74,47 @@ struct utmi_phy_data {
* Eth_port_0 that include (SGMII0, RXAUI0, SFI)
*/
struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
- {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII1, 0x1}, /* Lane 0 */
- {PHY_TYPE_SATA1, 0x4} } },
- {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 1 */
- {PHY_TYPE_SATA0, 0x4} } },
- {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 2 */
- {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_SFI, 0x1},
- {PHY_TYPE_SATA0, 0x4} } },
- {8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_RXAUI1, 0x1}, /* Lane 3 */
- {PHY_TYPE_SGMII1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
- {7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */
- {PHY_TYPE_RXAUI0, 0x2}, {PHY_TYPE_SFI, 0x2},
- {PHY_TYPE_SGMII1, 0x1} } },
- {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 5 */
- {PHY_TYPE_RXAUI1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
+ /* Lane 0 */
+ {4, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII1, 0x1},
+ {COMPHY_TYPE_SATA1, 0x4} } },
+ /* Lane 1 */
+ {4, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII2, 0x1},
+ {COMPHY_TYPE_SATA0, 0x4} } },
+ /* Lane 2 */
+ {6, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII0, 0x1},
+ {COMPHY_TYPE_RXAUI0, 0x1}, {COMPHY_TYPE_SFI, 0x1},
+ {COMPHY_TYPE_SATA0, 0x4} } },
+ /* Lane 3 */
+ {8, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_RXAUI1, 0x1},
+ {COMPHY_TYPE_SGMII1, 0x2}, {COMPHY_TYPE_SATA1, 0x4} } },
+ /* Lane 4 */
+ {7, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII0, 0x2},
+ {COMPHY_TYPE_RXAUI0, 0x2}, {COMPHY_TYPE_SFI, 0x2},
+ {COMPHY_TYPE_SGMII1, 0x1} } },
+ /* Lane 5 */
+ {6, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_SGMII2, 0x1},
+ {COMPHY_TYPE_RXAUI1, 0x2}, {COMPHY_TYPE_SATA1, 0x4} } },
};
struct comphy_mux_data cp110_comphy_pipe_mux_data[] = {
- {2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX0, 0x4} } }, /* Lane 0 */
- {4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 1 */
- {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_USB3_DEVICE, 0x2},
- {PHY_TYPE_PEX0, 0x4} } },
- {3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 2 */
- {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
- {3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 3 */
- {PHY_TYPE_USB3_HOST1, 0x1}, {PHY_TYPE_PEX0, 0x4} } },
- {4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 4 */
- {PHY_TYPE_USB3_HOST1, 0x1},
- {PHY_TYPE_USB3_DEVICE, 0x2}, {PHY_TYPE_PEX1, 0x4} } },
- {2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX2, 0x4} } }, /* Lane 5 */
+ /* Lane 0 */
+ {2, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_PEX0, 0x4} } },
+ /* Lane 1 */
+ {4, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+ {COMPHY_TYPE_USB3_HOST0, 0x1}, {COMPHY_TYPE_USB3_DEVICE, 0x2},
+ {COMPHY_TYPE_PEX0, 0x4} } },
+ /* Lane 2 */
+ {3, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+ {COMPHY_TYPE_USB3_HOST0, 0x1}, {COMPHY_TYPE_PEX0, 0x4} } },
+ /* Lane 3 */
+ {3, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+ {COMPHY_TYPE_USB3_HOST1, 0x1}, {COMPHY_TYPE_PEX0, 0x4} } },
+ /* Lane 4 */
+ {4, {{COMPHY_TYPE_UNCONNECTED, 0x0},
+ {COMPHY_TYPE_USB3_HOST1, 0x1},
+ {COMPHY_TYPE_USB3_DEVICE, 0x2}, {COMPHY_TYPE_PEX1, 0x4} } },
+ /* Lane 5 */
+ {2, {{COMPHY_TYPE_UNCONNECTED, 0x0}, {COMPHY_TYPE_PEX2, 0x4} } },
};
static u32 polling_with_timeout(void __iomem *addr, u32 val,
@@ -868,9 +880,9 @@ static void comphy_mux_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
comphy_base_addr + COMMON_SELECTOR_PIPE_OFFSET);
/* Fix the type after check the PHY and PIPE configuration */
for (lane = 0; lane < comphy_max_count; lane++) {
- if ((comphy_map_pipe_data[lane].type == PHY_TYPE_UNCONNECTED) &&
- (comphy_map_phy_data[lane].type == PHY_TYPE_UNCONNECTED))
- serdes_map[lane].type = PHY_TYPE_UNCONNECTED;
+ if ((comphy_map_pipe_data[lane].type == COMPHY_TYPE_UNCONNECTED) &&
+ (comphy_map_phy_data[lane].type == COMPHY_TYPE_UNCONNECTED))
+ serdes_map[lane].type = COMPHY_TYPE_UNCONNECTED;
}
}
@@ -895,7 +907,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
/* Check if the first 4 lanes configured as By-4 */
for (lane = 0, ptr_comphy_map = serdes_map; lane < 4;
lane++, ptr_comphy_map++) {
- if (ptr_comphy_map->type != PHY_TYPE_PEX0)
+ if (ptr_comphy_map->type != COMPHY_TYPE_PEX0)
break;
pcie_width++;
}
@@ -912,14 +924,14 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
pcie_width = 1;
}
switch (ptr_comphy_map->type) {
- case PHY_TYPE_UNCONNECTED:
- case PHY_TYPE_IGNORE:
+ case COMPHY_TYPE_UNCONNECTED:
+ case COMPHY_TYPE_IGNORE:
continue;
break;
- case PHY_TYPE_PEX0:
- case PHY_TYPE_PEX1:
- case PHY_TYPE_PEX2:
- case PHY_TYPE_PEX3:
+ case COMPHY_TYPE_PEX0:
+ case COMPHY_TYPE_PEX1:
+ case COMPHY_TYPE_PEX2:
+ case COMPHY_TYPE_PEX3:
mode = COMPHY_FW_PCIE_FORMAT(pcie_width,
ptr_comphy_map->clk_src,
COMPHY_PCIE_MODE,
@@ -928,30 +940,30 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
ptr_chip_cfg->comphy_base_addr, lane,
mode);
break;
- case PHY_TYPE_SATA0:
- case PHY_TYPE_SATA1:
- case PHY_TYPE_SATA2:
- case PHY_TYPE_SATA3:
+ case COMPHY_TYPE_SATA0:
+ case COMPHY_TYPE_SATA1:
+ case COMPHY_TYPE_SATA2:
+ case COMPHY_TYPE_SATA3:
mode = COMPHY_FW_MODE_FORMAT(COMPHY_SATA_MODE);
ret = comphy_sata_power_up(lane, hpipe_base_addr,
comphy_base_addr,
ptr_chip_cfg->cp_index,
mode);
break;
- case PHY_TYPE_USB3_HOST0:
- case PHY_TYPE_USB3_HOST1:
- case PHY_TYPE_USB3_DEVICE:
+ case COMPHY_TYPE_USB3_HOST0:
+ case COMPHY_TYPE_USB3_HOST1:
+ case COMPHY_TYPE_USB3_DEVICE:
ret = comphy_usb3_power_up(lane, hpipe_base_addr,
comphy_base_addr);
break;
- case PHY_TYPE_SGMII0:
- case PHY_TYPE_SGMII1:
- if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
+ case COMPHY_TYPE_SGMII0:
+ case COMPHY_TYPE_SGMII1:
+ if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) {
debug("Warning: ");
debug("SGMII PHY speed in lane %d is invalid,",
lane);
debug(" set PHY speed to 1.25G\n");
- ptr_comphy_map->speed = PHY_SPEED_1_25G;
+ ptr_comphy_map->speed = COMPHY_SPEED_1_25G;
}
/*
@@ -965,12 +977,12 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
ptr_chip_cfg->comphy_base_addr, lane,
mode);
break;
- case PHY_TYPE_SGMII2:
- case PHY_TYPE_SGMII3:
- if (ptr_comphy_map->speed == PHY_SPEED_INVALID) {
+ case COMPHY_TYPE_SGMII2:
+ case COMPHY_TYPE_SGMII3:
+ if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) {
debug("Warning: SGMII PHY speed in lane %d is invalid, set PHY speed to 1.25G\n",
lane);
- ptr_comphy_map->speed = PHY_SPEED_1_25G;
+ ptr_comphy_map->speed = COMPHY_SPEED_1_25G;
}
mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE,
@@ -980,7 +992,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
ptr_chip_cfg->comphy_base_addr, lane,
mode);
break;
- case PHY_TYPE_SFI:
+ case COMPHY_TYPE_SFI:
mode = COMPHY_FW_FORMAT(COMPHY_SFI_MODE,
COMPHY_UNIT_ID0,
ptr_comphy_map->speed);
@@ -988,8 +1000,8 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
ptr_chip_cfg->comphy_base_addr, lane,
mode);
break;
- case PHY_TYPE_RXAUI0:
- case PHY_TYPE_RXAUI1:
+ case COMPHY_TYPE_RXAUI0:
+ case COMPHY_TYPE_RXAUI1:
ret = comphy_rxauii_power_up(lane, hpipe_base_addr,
comphy_base_addr);
break;
@@ -1001,9 +1013,9 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
if (ret == 0) {
/*
* If interface wans't initialized, set the lane to
- * PHY_TYPE_UNCONNECTED state.
+ * COMPHY_TYPE_UNCONNECTED state.
*/
- ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
+ ptr_comphy_map->type = COMPHY_TYPE_UNCONNECTED;
pr_err("PLL is not locked - Failed to initialize lane %d\n",
lane);
}
diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c
index 98327557a899..aaef736b75dd 100644
--- a/drivers/phy/marvell/comphy_mux.c
+++ b/drivers/phy/marvell/comphy_mux.c
@@ -15,7 +15,7 @@
* description: this function passes over the COMPHY lanes and check if the type
* is valid for specific lane. If the type is not valid,
* the function update the struct and set the type of the lane as
- * PHY_TYPE_UNCONNECTED
+ * COMPHY_TYPE_UNCONNECTED
*/
static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
struct comphy_map *comphy_map_data, int comphy_max_lanes)
@@ -28,7 +28,7 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
for (lane = 0; lane < comphy_max_lanes;
lane++, comphy_map_data++, mux_data++) {
/* Don't check ignored COMPHYs */
- if (comphy_map_data->type == PHY_TYPE_IGNORE)
+ if (comphy_map_data->type == COMPHY_TYPE_IGNORE)
continue;
mux_opt = mux_data->mux_values;
@@ -43,8 +43,8 @@ static void comphy_mux_check_config(struct comphy_mux_data *mux_data,
debug("lane number %d, had invalid type %d\n",
lane, comphy_map_data->type);
debug("set lane %d as type %d\n", lane,
- PHY_TYPE_UNCONNECTED);
- comphy_map_data->type = PHY_TYPE_UNCONNECTED;
+ COMPHY_TYPE_UNCONNECTED);
+ comphy_map_data->type = COMPHY_TYPE_UNCONNECTED;
} else {
debug("lane number %d, has type %d\n",
lane, comphy_map_data->type);
@@ -88,7 +88,7 @@ static void comphy_mux_reg_write(struct comphy_mux_data *mux_data,
for (lane = 0; lane < comphy_max_lanes;
lane++, comphy_map_data++, mux_data++) {
- if (comphy_map_data->type == PHY_TYPE_IGNORE)
+ if (comphy_map_data->type == COMPHY_TYPE_IGNORE)
continue;
/*
diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h
index 08544fa758bf..7d62dcf7fa51 100644
--- a/include/dt-bindings/comphy/comphy_data.h
+++ b/include/dt-bindings/comphy/comphy_data.h
@@ -6,53 +6,53 @@
#ifndef _COMPHY_DATA_H_
#define _COMPHY_DATA_H_
-#define PHY_SPEED_1_25G 0
-#define PHY_SPEED_1_5G 1
-#define PHY_SPEED_2_5G 2
-#define PHY_SPEED_3G 3
-#define PHY_SPEED_3_125G 4
-#define PHY_SPEED_5G 5
-#define PHY_SPEED_5_15625G 6
-#define PHY_SPEED_6G 7
-#define PHY_SPEED_6_25G 8
-#define PHY_SPEED_10_3125G 9
-#define PHY_SPEED_MAX 10
-#define PHY_SPEED_INVALID 0xff
+#define COMPHY_SPEED_1_25G 0
+#define COMPHY_SPEED_1_5G 1
+#define COMPHY_SPEED_2_5G 2
+#define COMPHY_SPEED_3G 3
+#define COMPHY_SPEED_3_125G 4
+#define COMPHY_SPEED_5G 5
+#define COMPHY_SPEED_5_15625G 6
+#define COMPHY_SPEED_6G 7
+#define COMPHY_SPEED_6_25G 8
+#define COMPHY_SPEED_10_3125G 9
+#define COMPHY_SPEED_MAX 10
+#define COMPHY_SPEED_INVALID 0xff
-#define PHY_TYPE_UNCONNECTED 0
-#define PHY_TYPE_PEX0 1
-#define PHY_TYPE_PEX1 2
-#define PHY_TYPE_PEX2 3
-#define PHY_TYPE_PEX3 4
-#define PHY_TYPE_SATA0 5
-#define PHY_TYPE_SATA1 6
-#define PHY_TYPE_SATA2 7
-#define PHY_TYPE_SATA3 8
-#define PHY_TYPE_SGMII0 9
-#define PHY_TYPE_SGMII1 10
-#define PHY_TYPE_SGMII2 11
-#define PHY_TYPE_SGMII3 12
-#define PHY_TYPE_QSGMII 13
-#define PHY_TYPE_USB3 14
-#define PHY_TYPE_USB3_HOST0 15
-#define PHY_TYPE_USB3_HOST1 16
-#define PHY_TYPE_USB3_DEVICE 17
-#define PHY_TYPE_XAUI0 18
-#define PHY_TYPE_XAUI1 19
-#define PHY_TYPE_XAUI2 20
-#define PHY_TYPE_XAUI3 21
-#define PHY_TYPE_RXAUI0 22
-#define PHY_TYPE_RXAUI1 23
-#define PHY_TYPE_SFI 24
-#define PHY_TYPE_IGNORE 25
-#define PHY_TYPE_MAX 26
-#define PHY_TYPE_INVALID 0xff
+#define COMPHY_TYPE_UNCONNECTED 0
+#define COMPHY_TYPE_PEX0 1
+#define COMPHY_TYPE_PEX1 2
+#define COMPHY_TYPE_PEX2 3
+#define COMPHY_TYPE_PEX3 4
+#define COMPHY_TYPE_SATA0 5
+#define COMPHY_TYPE_SATA1 6
+#define COMPHY_TYPE_SATA2 7
+#define COMPHY_TYPE_SATA3 8
+#define COMPHY_TYPE_SGMII0 9
+#define COMPHY_TYPE_SGMII1 10
+#define COMPHY_TYPE_SGMII2 11
+#define COMPHY_TYPE_SGMII3 12
+#define COMPHY_TYPE_QSGMII 13
+#define COMPHY_TYPE_USB3 14
+#define COMPHY_TYPE_USB3_HOST0 15
+#define COMPHY_TYPE_USB3_HOST1 16
+#define COMPHY_TYPE_USB3_DEVICE 17
+#define COMPHY_TYPE_XAUI0 18
+#define COMPHY_TYPE_XAUI1 19
+#define COMPHY_TYPE_XAUI2 20
+#define COMPHY_TYPE_XAUI3 21
+#define COMPHY_TYPE_RXAUI0 22
+#define COMPHY_TYPE_RXAUI1 23
+#define COMPHY_TYPE_SFI 24
+#define COMPHY_TYPE_IGNORE 25
+#define COMPHY_TYPE_MAX 26
+#define COMPHY_TYPE_INVALID 0xff
-#define PHY_POLARITY_NO_INVERT 0
-#define PHY_POLARITY_TXD_INVERT 1
-#define PHY_POLARITY_RXD_INVERT 2
-#define PHY_POLARITY_ALL_INVERT \
- (PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT)
+#define COMPHY_POLARITY_NO_INVERT 0
+#define COMPHY_POLARITY_TXD_INVERT 1
+#define COMPHY_POLARITY_RXD_INVERT 2
+#define COMPHY_POLARITY_ALL_INVERT \
+ (COMPHY_POLARITY_TXD_INVERT | COMPHY_POLARITY_RXD_INVERT)
#define UTMI_PHY_TO_USB3_HOST0 0
#define UTMI_PHY_TO_USB3_HOST1 1
--
2.31.0
More information about the U-Boot
mailing list