[PATCH 11/37] imx: hab: Enable hab.c to authenticate additional images in open configuration

[Peng Fan (OSS)]

From: Breno Lima <breno.lima at nxp.com>

Currently it's not possible to authenticate additional boot images in HAB
open configuration.

The hab.c code is checking if the SEC_CONFIG[1] fuse is programmed prior
to calling the hab_authenticate_image() API function. Users cannot check
if their additional boot images has been correctly signed prior to closing
their device.

Enable hab.c to authenticate additional boot images in open mode so HAB
events can be retrieved through get_hab_status() function.

Signed-off-by: Breno Lima <breno.lima at nxp.com>
Reviewed-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/mach-imx/hab.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c
index bd00d4a458..01ddfab699 100644
--- a/arch/arm/mach-imx/hab.c
+++ b/arch/arm/mach-imx/hab.c
@@ -794,10 +794,8 @@ int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,
 	struct ivt *ivt;
 	enum hab_status status;
 
-	if (!imx_hab_is_enabled()) {
+	if (!imx_hab_is_enabled())
 		puts("hab fuse not enabled\n");
-		return 0;
-	}
 
 	printf("\nAuthenticate image from DDR location 0x%x...\n",
 	       ddr_start);
@@ -896,7 +894,7 @@ hab_exit_failure_print_status:
 
 hab_authentication_exit:
 
-	if (load_addr != 0)
+	if (load_addr != 0 || !imx_hab_is_enabled())
 		result = 0;
 
 	return result;
-- 
2.25.1