[PATCH 30/37] crypto: caam: Add secure memory vid 3 support
Peng Fan (OSS)
peng.fan at oss.nxp.com
Thu Mar 25 10:30:29 CET 2021
From: Aymen Sghaier <aymen.sghaier at nxp.com>
In i.MX8M platforms the secure memory block has a newer version
than those used in i.MX6/7 platforms, this patch update the driver
to use the correct registers offsets.
Signed-off-by: Aymen Sghaier <aymen.sghaier at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
include/fsl_sec.h | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index dca0dd0328..09ce916297 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -276,7 +276,8 @@ struct sg_entry {
#define SM_V2_OFFSET 0xa00
/*Secure Memory Versioning */
#define SMVID_V2 0x20105
-#define SM_VERSION(x) (x < SMVID_V2 ? 1 : 2)
+#define SM_VERSION(x) ({typeof(x) _x = x; \
+ _x < SMVID_V2 ? 1 : (_x < 0x20300 ? 2 : 3); })
#define SM_OFFSET(x) (x == 1 ? SM_V1_OFFSET : SM_V2_OFFSET)
/* CAAM Job Ring 0 Registers */
/* Secure Memory Partition Owner register */
@@ -303,8 +304,10 @@ struct sg_entry {
#define SM_CMD(v) (v == 1 ? 0x0 : 0x1E4)
#define SM_STATUS(v) (v == 1 ? 0x8 : 0x1EC)
#define SM_PERM(v) (v == 1 ? 0x10 : 0x4)
-#define SM_GROUP2(v) (v == 1 ? 0x14 : 0x8)
-#define SM_GROUP1(v) (v == 1 ? 0x18 : 0xC)
+#define SM_GROUP2(v) ({typeof(v) _v = v; \
+ _v == 1 ? 0x14 : (_v == 2 ? 0x8 : 0xC); })
+#define SM_GROUP1(v) ({typeof(v) _v = v; \
+ _v == 1 ? 0x18 : (_v == 2 ? 0xC : 0x8); })
#define CMD_PAGE_ALLOC 0x1
#define CMD_PAGE_DEALLOC 0x2
#define CMD_PART_DEALLOC 0x3
@@ -322,10 +325,15 @@ struct sg_entry {
#define SEC_MEM_PAGE2 (CAAM_ARB_BASE_ADDR + 0x2000)
#define SEC_MEM_PAGE3 (CAAM_ARB_BASE_ADDR + 0x3000)
-#define JR_MID 2 /* Matches ROM configuration */
-#define KS_G1 (1 << JR_MID) /* CAAM only */
-#define PERM 0x0000B008 /* Clear on release, lock SMAP
- * lock SMAG group 1 Blob */
+#ifdef CONFIG_IMX8M
+#define JR_MID (1) /* Matches ATF configuration */
+#define KS_G1 (0x10000 << JR_MID) /* CAAM only */
+#define PERM (0xB080) /* CSP, SMAP_LCK, SMAG_LCK, G1_BLOB */
+#else
+#define JR_MID (2) /* Matches ROM configuration */
+#define KS_G1 BIT(JR_MID) /* CAAM only */
+#define PERM (0xB008) /* CSP, SMAP_LCK, SMAG_LCK, G1_BLOB */
+#endif /* CONFIG_IMX8M */
/* HAB WRAPPED KEY header */
#define WRP_HDR_SIZE 0x08
--
2.25.1
More information about the U-Boot
mailing list