[PATCH] arm: imx: imx8mm: correct unrecognized fracpll frequency

[Andrey Zhizhikin]

Frequency requested by ddrphy_init_set_dfi_clk from fracpll uses MHZ()
macro, which expands the value provided to the Hz range without taking into
account the precise Hz setting. This causes the frequency of 266 MHz not ot
be found in the imx8mm_fracpll_tbl, since it is entered there with a
precise Hz value. This in turn causes the boot hang in SPL, as proper DDR
fracpll frequency cannot be determined.

Correct the value in imx8mm_fracpll_tbl to match the one expanded by
MHZ(266) macro, rounding it down to MHz range only.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin at leica-geosystems.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Ye Li <ye.li at nxp.com>
Fixes: 825ab6b406 ("driver: ddr: Refine the ddr init driver on imx8m")
---
 arch/arm/mach-imx/imx8m/clock_imx8mm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
index 029d06f27f..86ff2b9cc9 100644
--- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -54,7 +54,7 @@ static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = {
 	PLL_1443X_RATE(600000000U, 300, 3, 2, 0),
 	PLL_1443X_RATE(594000000U, 99, 1, 2, 0),
 	PLL_1443X_RATE(400000000U, 300, 9, 1, 0),
-	PLL_1443X_RATE(266666667U, 400, 9, 2, 0),
+	PLL_1443X_RATE(266000000U, 400, 9, 2, 0),
 	PLL_1443X_RATE(167000000U, 334, 3, 4, 0),
 	PLL_1443X_RATE(100000000U, 300, 9, 3, 0),
 };
@@ -72,7 +72,7 @@ static int fracpll_configure(enum pll_clocks pll, u32 freq)
 	}
 
 	if (i == ARRAY_SIZE(imx8mm_fracpll_tbl)) {
-		printf("No matched freq table %u\n", freq);
+		printf("%s: No matched freq table %u\n", __func__, freq);
 		return -EINVAL;
 	}
 
@@ -148,7 +148,7 @@ void dram_enable_bypass(ulong clk_val)
 	}
 
 	if (i == ARRAY_SIZE(imx8mm_dram_bypass_tbl)) {
-		printf("No matched freq table %lu\n", clk_val);
+		printf("%s: No matched freq table %lu\n", __func__, clk_val);
 		return;
 	}
 
-- 
2.25.1