[PATCH 1/3] imx8mm: configs: enable distro default features

[Andrey Zhizhikin]

imx8mm ekv has been switched to use distro boot commands, but had no
correct options enabled to support sysboot.
According to the README.distro, sysboot is consindered to be a
recommended way of using distro boot commands, it required default distro
features to be enabled instead of only those that are relevant to the boot
script.

Replace the boot script specific options in the config to a default distro
option.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin at leica-geosystems.com>
Cc: Peng Fan <peng.fan at nxp.com>
Fixes: 2df8930bf9 ("imx8mm: configs: add support for distro boot commands")
---
 configs/imx8mm_evk_defconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index 23741a1c8a..6a3b15389b 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mm-evk"
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -40,7 +41,6 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -50,7 +50,6 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
-- 
2.25.1