sunxi_nand_spl reading zeros on NextThing C.H.I.P.
r315h at yahoo.com
Sun May 2 00:48:05 CEST 2021
Replying to myself,
I'm using sunxi driver for nand spl, had to remove ECC from "nand_read_page"
function, after that I was able to proceed to second stage of boot.
Not sure of the cause, maybe the u-boot_SPL ECC algorithm is different of
the one on u-boot, which is used to write u-boot on nand as described by
Sent from: http://u-boot.10912.n7.nabble.com/
More information about the U-Boot