[PATCHv3 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency

[Tero Kristo]

MCU timer1 is used as the tick timer for MCU R5 SPL, and the
clock-frequency defined in DT appears to be incorrect at the moment.
Actual clock source for the timer is MCU_SYSCLK0 / 4 which is 250MHz.

Earlier setup of 25MHz went unnoticed, as there was a separate issue
with omap-timer, which caused an error to the clock by a factor of 8
with j7 devices. This problem surfaced once the omap-timer was fixed.

Signed-off-by: Tero Kristo <kristo at kernel.org>
---
 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi | 2 +-
 arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
index bd037be350..c3aae65b39 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -33,7 +33,7 @@
 		compatible = "ti,omap5430-timer";
 		reg = <0x0 0x40400000 0x0 0x80>;
 		ti,timer-alwon;
-		clock-frequency = <25000000>;
+		clock-frequency = <250000000>;
 		u-boot,dm-spl;
 	};
 
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index 3384ed9f3a..1135de5a92 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -46,7 +46,7 @@
 		compatible = "ti,omap5430-timer";
 		reg = <0x0 0x40400000 0x0 0x80>;
 		ti,timer-alwon;
-		clock-frequency = <25000000>;
+		clock-frequency = <250000000>;
 		u-boot,dm-spl;
 	};
 
-- 
2.17.1