cmd:GPIO:TI: 'gpio' command Failure Error on Beaglebone Black
Adarsh Babu Kalepalli
learn2kab at gmail.com
Thu May 6 07:58:21 CEST 2021
Hi,
Error output "*Command 'gpio' failed: Error -19*" is occurring with "*gpio
status -a*"
command on Beaglebone Black.
The "gpio" command is proper till "U-Boot 2021.04-rc2".
Error message is noticed from subsequent releases on-wards.
Problem is noticed on u-boot versions from *U-Boot 2021.04-rc3 to U-Boot
2021.07-rc1*
The same command is OK on "sandbox" and "rpi 0 wireless" .
Not sure if the maintenance of code for old boards such as Beaglebone Black
is
still actively persuaded.Trying to report the observations
------------------------------------------------------------------
Code/Output :
-------------------------------------------------------------------
U-Boot SPL 2021.07-rc1-00179-g8ddaf94358 (May 03 2021 - 15:36:38 +0530)
Trying to boot from MMC1
U-Boot 2021.07-rc1-00179-g8ddaf94358 (May 03 2021 - 15:36:38 +0530)
CPU : AM335X-GP rev 2.1
Model: TI AM335x BeagleBone Black
DRAM: 512 MiB
WDT: Started with servicing (60s timeout)
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
<ethaddr> not set. Validating first E-fuse MAC
Net: eth2: ethernet at 4a100000, eth3: usb_ether
Hit any key to stop autoboot: 0
=> gpio status -a
Command 'gpio' failed: Error -19
=>
-------------------------------------------------------------------
Regards,
Adarsh
More information about the U-Boot
mailing list