[PATCH v2 49/50] image: Split up boot_get_fdt()
Simon Glass
sjg at chromium.org
Thu May 6 16:24:37 CEST 2021
This function is far too long. Before trying to remove #ifdefs, split out
the code that deals with selecting the FDT into a separate function.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
common/image-fdt.c | 227 +++++++++++++++++++++++++--------------------
1 file changed, 127 insertions(+), 100 deletions(-)
diff --git a/common/image-fdt.c b/common/image-fdt.c
index 524adbd1339..53976e39796 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -245,53 +245,29 @@ error:
}
/**
- * boot_get_fdt - main fdt handling routine
- * @argc: command argument count
- * @argv: command argument list
- * @arch: architecture (IH_ARCH_...)
- * @images: pointer to the bootm images structure
- * @of_flat_tree: pointer to a char* variable, will hold fdt start address
- * @of_size: pointer to a ulong variable, will hold fdt length
+ * select_fdt() - Select and locate the FDT to use
*
- * boot_get_fdt() is responsible for finding a valid flat device tree image.
- * Curently supported are the following ramdisk sources:
- * - multicomponent kernel/ramdisk image,
- * - commandline provided address of decicated ramdisk image.
- *
- * returns:
- * 0, if fdt image was found and valid, or skipped
- * of_flat_tree and of_size are set to fdt start address and length if
- * fdt image is found and valid
- *
- * 1, if fdt image is found but corrupted
- * of_flat_tree and of_size are set to 0 if no fdt exists
+ * @images: pointer to the bootm images structure
+ * @select: name of FDT to select, or NULL for any
+ * @arch: expected FDT architecture
+ * @fdt_addrp: pointer to a ulong variable, will hold FDT pointer
+ * @return 0 if OK, -ENOPKG if no FDT (but an error should not be reported),
+ * other -ve value on other error
*/
-int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
- bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
-{
- ulong img_addr;
- ulong fdt_addr;
- char *fdt_blob = NULL;
- void *buf;
- const char *select = NULL;
- *of_flat_tree = NULL;
- *of_size = 0;
-
- img_addr = (argc == 0) ? image_load_addr :
- simple_strtoul(argv[0], NULL, 16);
- buf = map_sysmem(img_addr, 0);
+static int select_fdt(bootm_headers_t *images, const char *select, u8 arch,
+ ulong *fdt_addrp)
+{
+ const char *buf;
+ ulong fdt_addr;
- if (argc > 2)
- select = argv[2];
- if (select || genimg_has_config(images)) {
#if CONFIG_IS_ENABLED(FIT)
- const char *fit_uname_config = images->fit_uname_cfg;
- const char *fit_uname_fdt = NULL;
- ulong default_addr;
- int fdt_noffset;
+ const char *fit_uname_config = images->fit_uname_cfg;
+ const char *fit_uname_fdt = NULL;
+ ulong default_addr;
+ int fdt_noffset;
- if (select) {
+ if (select) {
/*
* If the FDT blob comes from the FIT image and the
* FIT image address is omitted in the command line
@@ -305,48 +281,47 @@ int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
else
default_addr = image_load_addr;
- if (fit_parse_conf(select, default_addr,
- &fdt_addr, &fit_uname_config)) {
+ if (fit_parse_conf(select, default_addr, &fdt_addr,
+ &fit_uname_config)) {
debug("* fdt: config '%s' from image at 0x%08lx\n",
fit_uname_config, fdt_addr);
- } else if (fit_parse_subimage(select, default_addr,
- &fdt_addr, &fit_uname_fdt)) {
+ } else if (fit_parse_subimage(select, default_addr, &fdt_addr,
+ &fit_uname_fdt)) {
debug("* fdt: subimage '%s' from image at 0x%08lx\n",
fit_uname_fdt, fdt_addr);
} else
#endif
- {
- fdt_addr = simple_strtoul(select, NULL, 16);
- debug("* fdt: cmdline image address = 0x%08lx\n",
- fdt_addr);
- }
-#if CONFIG_IS_ENABLED(FIT)
- } else {
- /* use FIT configuration provided in first bootm
- * command argument
- */
- fdt_addr = map_to_sysmem(images->fit_hdr_os);
- fdt_noffset = fit_get_node_from_config(images,
- FIT_FDT_PROP,
- fdt_addr);
- if (fdt_noffset == -ENOENT)
- return 0;
- else if (fdt_noffset < 0)
- return 1;
+ {
+ fdt_addr = simple_strtoul(select, NULL, 16);
+ debug("* fdt: cmdline image address = 0x%08lx\n",
+ fdt_addr);
}
-#endif
- debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
- fdt_addr);
-
- /*
- * Check if there is an FDT image at the
- * address provided in the second bootm argument
- * check image type, for FIT images get a FIT node.
+#if CONFIG_IS_ENABLED(FIT)
+ } else {
+ /* use FIT configuration provided in first bootm
+ * command argument
*/
- buf = map_sysmem(fdt_addr, 0);
- switch (genimg_get_format(buf)) {
+ fdt_addr = map_to_sysmem(images->fit_hdr_os);
+ fdt_noffset = fit_get_node_from_config(images, FIT_FDT_PROP,
+ fdt_addr);
+ if (fdt_noffset == -ENOENT)
+ return -ENOPKG;
+ else if (fdt_noffset < 0)
+ return fdt_noffset;
+ }
+#endif
+ debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
+ fdt_addr);
+
+ /*
+ * Check if there is an FDT image at the
+ * address provided in the second bootm argument
+ * check image type, for FIT images get a FIT node.
+ */
+ buf = map_sysmem(fdt_addr, 0);
+ switch (genimg_get_format(buf)) {
#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
- case IMAGE_FORMAT_LEGACY: {
+ case IMAGE_FORMAT_LEGACY: {
const image_header_t *fdt_hdr;
ulong load, load_end;
ulong image_start, image_data, image_end;
@@ -356,7 +331,7 @@ int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
fdt_addr);
fdt_hdr = image_get_fdt(fdt_addr);
if (!fdt_hdr)
- goto no_fdt;
+ return -ENOPKG;
/*
* move image data to the load address,
@@ -377,7 +352,7 @@ int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
if ((load < image_end) && (load_end > image_start)) {
fdt_error("fdt overwritten");
- goto error;
+ return -EFAULT;
}
debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
@@ -391,24 +366,24 @@ int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
break;
}
#endif
- case IMAGE_FORMAT_FIT:
- /*
- * This case will catch both: new uImage format
- * (libfdt based) and raw FDT blob (also libfdt
- * based).
- */
+ case IMAGE_FORMAT_FIT:
+ /*
+ * This case will catch both: new uImage format
+ * (libfdt based) and raw FDT blob (also libfdt
+ * based).
+ */
#if CONFIG_IS_ENABLED(FIT)
/* check FDT blob vs FIT blob */
if (!fit_check_format(buf, IMAGE_SIZE_INVAL)) {
ulong load, len;
- fdt_noffset = boot_get_fdt_fit(images,
- fdt_addr, &fit_uname_fdt,
- &fit_uname_config,
- arch, &load, &len);
+ fdt_noffset = boot_get_fdt_fit(images, fdt_addr,
+ &fit_uname_fdt,
+ &fit_uname_config,
+ arch, &load, &len);
if (fdt_noffset < 0)
- goto error;
+ return -ENOENT;
images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
images->fit_uname_fdt = fit_uname_fdt;
@@ -416,22 +391,74 @@ int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
fdt_addr = load;
break;
- } else
+ } else
#endif
- {
- /*
- * FDT blob
- */
- debug("* fdt: raw FDT blob\n");
- printf("## Flattened Device Tree blob at %08lx\n",
- (long)fdt_addr);
- }
- break;
- default:
- puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
- goto error;
+ {
+ /*
+ * FDT blob
+ */
+ debug("* fdt: raw FDT blob\n");
+ printf("## Flattened Device Tree blob at %08lx\n",
+ (long)fdt_addr);
}
+ break;
+ default:
+ puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
+ return -ENOENT;
+ }
+ *fdt_addrp = fdt_addr;
+
+ return 0;
+}
+/**
+ * boot_get_fdt - main fdt handling routine
+ * @argc: command argument count
+ * @argv: command argument list
+ * @arch: architecture (IH_ARCH_...)
+ * @images: pointer to the bootm images structure
+ * @of_flat_tree: pointer to a char* variable, will hold fdt start address
+ * @of_size: pointer to a ulong variable, will hold fdt length
+ *
+ * boot_get_fdt() is responsible for finding a valid flat device tree image.
+ * Currently supported are the following ramdisk sources:
+ * - multicomponent kernel/ramdisk image,
+ * - commandline provided address of decicated ramdisk image.
+ *
+ * returns:
+ * 0, if fdt image was found and valid, or skipped
+ * of_flat_tree and of_size are set to fdt start address and length if
+ * fdt image is found and valid
+ *
+ * 1, if fdt image is found but corrupted
+ * of_flat_tree and of_size are set to 0 if no fdt exists
+ */
+int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
+ bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
+{
+ ulong img_addr;
+ ulong fdt_addr;
+ char *fdt_blob = NULL;
+ void *buf;
+ const char *select = NULL;
+
+ *of_flat_tree = NULL;
+ *of_size = 0;
+
+ img_addr = (argc == 0) ? image_load_addr :
+ simple_strtoul(argv[0], NULL, 16);
+ buf = map_sysmem(img_addr, 0);
+
+ if (argc > 2)
+ select = argv[2];
+ if (select || genimg_has_config(images)) {
+ int ret;
+
+ ret = select_fdt(images, select, arch, &fdt_addr);
+ if (ret == -ENOPKG)
+ goto no_fdt;
+ else if (ret)
+ return 1;
printf(" Booting using the fdt blob at %#08lx\n", fdt_addr);
fdt_blob = map_sysmem(fdt_addr, 0);
} else if (images->legacy_hdr_valid &&
--
2.31.1.607.g51e8a6a459-goog
More information about the U-Boot
mailing list