[PATCH] rtc: m41t62: fix wrong register use for set/reset ST bit

[MAX.YANG 楊勝鴻]

Fix wrong register use when set/reset ST bit.
ST bit is in register M41T62_REG_SEC not in M41T62_REG_ALARM_HOUR.

I have not actually tested this. But this seemed buggy from inspection.

Fixes: 9bbe210512c4539 ("rtc: m41t62: add oscillator fail bit reset support")
Signed-off-by: Max Yang <max.yang at deltaww.com>
---

drivers/rtc/m41t62.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c
index 0a4e12d698..8be532c3e3 100644
--- a/drivers/rtc/m41t62.c
+++ b/drivers/rtc/m41t62.c
@@ -213,13 +213,13 @@ static int m41t62_rtc_restart_osc(struct udevice *dev)

        /* 1. Set stop bit */
        val |= M41T62_SEC_ST;
-       ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
+       ret = dm_i2c_write(dev, M41T62_REG_SEC, &val, sizeof(val));
        if (ret)
                return ret;

        /* 2. Clear stop bit */
        val &= ~M41T62_SEC_ST;
-       ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
+       ret = dm_i2c_write(dev, M41T62_REG_SEC, &val, sizeof(val));
        if (ret)
                return ret;

*************************************************************************
This email message, including any attachments, is for the sole
use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message. [Delta Electronics, INC. Taiwan]
*************************************************************************