[PATCH v3 07/14] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver
Jaehoon Chung
jh80.chung at samsung.com
Tue May 11 00:09:41 CEST 2021
On 5/10/21 3:32 PM, Masami Hiramatsu wrote:
> From: Jassi Brar <jaswinder.singh at linaro.org>
>
> Signed-off-by: Jassi Brar <jaswinder.singh at linaro.org>
> Signed-off-by: Masami Hiramatsu <masami.hiramatsu at linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>
Best Regards,
Jaehoon Chung
> ---
> Changes in v3:
> - Rename config name to MMC_SDHCI_F_SDH30.
> - Remove unneeded wait in drivers/mmc/sdhci.c.
> - Rename probe function to f_sdh30_sdhci_probe.
> ---
> drivers/mmc/Kconfig | 10 ++++++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/f_sdh30.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 92 insertions(+)
> create mode 100644 drivers/mmc/f_sdh30.c
>
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index f4ad1db45d..026b6f7d24 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -559,6 +559,16 @@ config MMC_SDHCI_IPROC
>
> If unsure, say N.
>
> +config MMC_SDHCI_F_SDH30
> + bool "SDHCI support for Fujitsu Semiconductor F_SDH30"
> + depends on BLK && DM_MMC
> + depends on MMC_SDHCI
> + help
> + This selects the Secure Digital Host Controller Interface (SDHCI)
> + Needed by some Fujitsu SoC for MMC / SD / SDIO support.
> + If you have a controller with this interface, say Y or M here.
> + If unsure, say N.
> +
> config MMC_SDHCI_KONA
> bool "SDHCI support on Broadcom KONA platform"
> depends on MMC_SDHCI
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 89d6af3db3..f5fd59093e 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -76,3 +76,4 @@ obj-$(CONFIG_MMC_UNIPHIER) += tmio-common.o uniphier-sd.o
> obj-$(CONFIG_RENESAS_SDHI) += tmio-common.o renesas-sdhi.o
> obj-$(CONFIG_MMC_BCM2835) += bcm2835_sdhost.o
> obj-$(CONFIG_MMC_MTK) += mtk-sd.o
> +obj-$(CONFIG_MMC_SDHCI_F_SDH30) += f_sdh30.o
> diff --git a/drivers/mmc/f_sdh30.c b/drivers/mmc/f_sdh30.c
> new file mode 100644
> index 0000000000..3a85d9e348
> --- /dev/null
> +++ b/drivers/mmc/f_sdh30.c
> @@ -0,0 +1,81 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Socionext F_SDH30 eMMC driver
> + * Copyright 2021 Linaro Ltd.
> + * Copyright 2021 Socionext, Inc.
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <malloc.h>
> +#include <sdhci.h>
> +
> +struct f_sdh30_plat {
> + struct mmc_config cfg;
> + struct mmc mmc;
> +};
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static int f_sdh30_sdhci_probe(struct udevice *dev)
> +{
> + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> + struct f_sdh30_plat *plat = dev_get_plat(dev);
> + struct sdhci_host *host = dev_get_priv(dev);
> + int ret;
> +
> + ret = mmc_of_parse(dev, &plat->cfg);
> + if (ret)
> + return ret;
> +
> + host->mmc = &plat->mmc;
> + host->mmc->dev = dev;
> + host->mmc->priv = host;
> +
> + ret = sdhci_setup_cfg(&plat->cfg, host, 200000000, 400000);
> + if (ret)
> + return ret;
> +
> + upriv->mmc = host->mmc;
> +
> + mmc_set_clock(host->mmc, host->mmc->cfg->f_min, MMC_CLK_ENABLE);
> +
> + return sdhci_probe(dev);
> +}
> +
> +static int f_sdh30_of_to_plat(struct udevice *dev)
> +{
> + struct sdhci_host *host = dev_get_priv(dev);
> +
> + host->name = strdup(dev->name);
> + host->ioaddr = dev_read_addr_ptr(dev);
> + host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
> + host->index = dev_read_u32_default(dev, "index", 0);
> +
> + return 0;
> +}
> +
> +static int f_sdh30_bind(struct udevice *dev)
> +{
> + struct f_sdh30_plat *plat = dev_get_plat(dev);
> +
> + return sdhci_bind(dev, &plat->mmc, &plat->cfg);
> +}
> +
> +static const struct udevice_id f_sdh30_mmc_ids[] = {
> + { .compatible = "fujitsu,mb86s70-sdhci-3.0" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(f_sdh30_drv) = {
> + .name = "f_sdh30_sdhci",
> + .id = UCLASS_MMC,
> + .of_match = f_sdh30_mmc_ids,
> + .of_to_plat = f_sdh30_of_to_plat,
> + .ops = &sdhci_ops,
> + .bind = f_sdh30_bind,
> + .probe = f_sdh30_sdhci_probe,
> + .priv_auto = sizeof(struct sdhci_host),
> + .plat_auto = sizeof(struct f_sdh30_plat),
> +};
>
>
More information about the U-Boot
mailing list