[PATCH 5/7] ARM: dts: k3: Add cfg register space for ringacc and udmap
Lokesh Vutla
lokeshvutla at ti.com
Wed May 12 08:10:10 CEST 2021
On 11/05/21 11:34 am, Vignesh Raghavendra wrote:
>
>
> On 5/11/21 10:21 AM, Lokesh Vutla wrote:
>>
>>
>> On 10/05/21 10:54 pm, Vignesh Raghavendra wrote:
>>> R5 SPL needs access to cfg space of Rings and UDMAP, therefore add RING
>>> CFG, TCHAN CFG and RCHAN CFG address ranges.
>>>
>>> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
>>> ---
>>> arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 14 ++++++++++
>>> .../k3-j7200-common-proc-board-u-boot.dtsi | 26 +++++++++++++++++++
>>> .../k3-j721e-common-proc-board-u-boot.dtsi | 14 ++++++++++
>>
>> If these are specific to R5, then it should be moved to R5 dts no? -u-boot.dtsi
>> will be applied to A53 dts as well.
>>
>
> Not really.. There registers are present within respective IPs. A53/A72
> use DM APIs to configure these registers whereas R5 does direct
> programming. I intend to add these ranges to kernel DT as well. Until
> then, will be in -u-boot.dtsi.
>
You intend to add mcu-navss ringacc to kernel dts as well. I am fine with this.
But please remember to update u-boot dts once you update kernel dts
Thanks and regards,
Lokesh
>> Thanks and regards,
>> Lokesh
>>
>>> 3 files changed, 54 insertions(+)
>>>
>>> diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
>>> index b0602d1dad..2840258518 100644
>>> --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
>>> +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
>>> @@ -35,11 +35,25 @@
>>> u-boot,dm-spl;
>>>
>>> ringacc at 2b800000 {
>>> + reg = <0x0 0x2b800000 0x0 0x400000>,
>>> + <0x0 0x2b000000 0x0 0x400000>,
>>> + <0x0 0x28590000 0x0 0x100>,
>>> + <0x0 0x2a500000 0x0 0x40000>,
>>> + <0x0 0x28440000 0x0 0x40000>;
>>> + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
>>> u-boot,dm-spl;
>>> ti,dma-ring-reset-quirk;
>>> };
>>>
>>> dma-controller at 285c0000 {
>>> + reg = <0x0 0x285c0000 0x0 0x100>,
>>> + <0x0 0x284c0000 0x0 0x4000>,
>>> + <0x0 0x2a800000 0x0 0x40000>,
>>> + <0x0 0x284a0000 0x0 0x4000>,
>>> + <0x0 0x2aa00000 0x0 0x40000>,
>>> + <0x0 0x28400000 0x0 0x2000>;
>>> + reg-names = "gcfg", "rchan", "rchanrt", "tchan",
>>> + "tchanrt", "rflow";
>>> u-boot,dm-spl;
>>> };
>>> };
>>> diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
>>> index c3aae65b39..41ce9fcb59 100644
>>> --- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
>>> +++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
>>> @@ -40,6 +40,32 @@
>>> chipid at 43000014 {
>>> u-boot,dm-spl;
>>> };
>>> +
>>> + mcu-navss{
>>> + u-boot,dm-spl;
>>> +
>>> + ringacc at 2b800000 {
>>> + reg = <0x0 0x2b800000 0x0 0x400000>,
>>> + <0x0 0x2b000000 0x0 0x400000>,
>>> + <0x0 0x28590000 0x0 0x100>,
>>> + <0x0 0x2a500000 0x0 0x40000>,
>>> + <0x0 0x28440000 0x0 0x40000>;
>>> + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
>>> + u-boot,dm-spl;
>>> + };
>>> +
>>> + dma-controller at 285c0000 {
>>> + reg = <0x0 0x285c0000 0x0 0x100>,
>>> + <0x0 0x284c0000 0x0 0x4000>,
>>> + <0x0 0x2a800000 0x0 0x40000>,
>>> + <0x0 0x284a0000 0x0 0x4000>,
>>> + <0x0 0x2aa00000 0x0 0x40000>,
>>> + <0x0 0x28400000 0x0 0x2000>;
>>> + reg-names = "gcfg", "rchan", "rchanrt", "tchan",
>>> + "tchanrt", "rflow";
>>> + u-boot,dm-spl;
>>> + };
>>> + };
>>> };
>>>
>>> &secure_proxy_main {
>>> diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
>>> index 1135de5a92..ed64f2720d 100644
>>> --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
>>> +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
>>> @@ -54,10 +54,24 @@
>>> u-boot,dm-spl;
>>>
>>> ringacc at 2b800000 {
>>> + reg = <0x0 0x2b800000 0x0 0x400000>,
>>> + <0x0 0x2b000000 0x0 0x400000>,
>>> + <0x0 0x28590000 0x0 0x100>,
>>> + <0x0 0x2a500000 0x0 0x40000>,
>>> + <0x0 0x28440000 0x0 0x40000>;
>>> + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
>>> u-boot,dm-spl;
>>> };
>>>
>>> dma-controller at 285c0000 {
>>> + reg = <0x0 0x285c0000 0x0 0x100>,
>>> + <0x0 0x284c0000 0x0 0x4000>,
>>> + <0x0 0x2a800000 0x0 0x40000>,
>>> + <0x0 0x284a0000 0x0 0x4000>,
>>> + <0x0 0x2aa00000 0x0 0x40000>,
>>> + <0x0 0x28400000 0x0 0x2000>;
>>> + reg-names = "gcfg", "rchan", "rchanrt", "tchan",
>>> + "tchanrt", "rflow";
>>> u-boot,dm-spl;
>>> };
>>> };
>>>
More information about the U-Boot
mailing list