Please pull u-boot-marvell/master

[Stefan Roese]

Hi Tom,

please pull the next batch of Marvell Armada related patches. Here the
summary log:

----------------------------------------------------------------
- Add base support for Marvell OcteonTX2 CN9130 DB (mostly done
   by Kostya)
- Sync Armada mvpp2 ethernet driver with Marvell version (misc Marvell
   authors)
- Sync Armada 8k MMU setup with Marvell version (misc Marvell
   authors)
- spi: kirkwood: Some fixes especially for baudrate generation
   (misc Marvell authors)
- mvebu: x530: Reduce SPL image size (Stefan)
- Rename "rx_training" to "mvebu_comphy_rx_training" (Stefan)
----------------------------------------------------------------

Here the Azure build:

https://dev.azure.com/sr0718/u-boot/_build/results?buildId=87&view=results

It shows some issues with xilinx_versal_virt, which seem to be not
related to this patch set and also occurred yesterday.

Thanks,
Stefan

The following changes since commit ea184cbff99ea1d82dcf94c95afe054e95da5069:

   Merge tag 'ti-v2021.07-rc3' of 
https://source.denx.de/u-boot/custodians/u-boot-ti (2021-05-12 10:07:21 
-0400)

are available in the Git repository at:

   git at source.denx.de:u-boot/custodians/u-boot-marvell.git

for you to fetch changes up to e0a6df9efa69bfe662def66d12b8702ad1cf3a51:

   arm: octeontx2: Add Octeon TX2 CN913x DB support (2021-05-13 08:18:19 
+0200)

----------------------------------------------------------------
Ben Peled (3):
       net: mvpp2: AN Bypass in 1000 and 2500 basex mode
       net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG
       net: mvpp2: fix missing switch case break

Grzegorz Jaszczyk (4):
       spi: kirkwood: prevent limiting speed to 0
       arm64: mvebu: do not map firmware RT service region
       arm64: mvebu: a8k: move firmware related definitions to fw info
       arm64: mvebu: extend the mmio region

Ken Ma (1):
       spi: kirkwood: support extended baud rates

Konstantin Porotchkin (2):
       arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
       arm: octeontx2: Add Octeon TX2 CN913x DB support

Marcin Wojtas (4):
       net: mvpp2: remove redundant SMI address configuration
       net: mvpp2: add explicit sgmii-2500 support
       spi: kirkwood: prevent configuring speed exceeding max controller 
freq
       pcie: designware: mvebu: do not configure ATU for IO when not used

Stefan Chulski (5):
       phy: introduce 1000BaseX and 2500BaseX modes
       net: mvpp2: add CP115 port1 10G/5G SFI support
       net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support
       net: mvpp2: Fix 2.5G GMII_SPEED configurations
       net: mvpp2: allow MDIO registration for fixed links

Stefan Roese (2):
       mvebu: x530: Reduce SPL image size
       cmd: mvebu: Rename rx_training to mvebu_comphy_rx_training

jinghua (1):
       arm64: mvebu: a8k: align memory regions

  arch/arm/dts/Makefile                             |   6 +
  arch/arm/dts/cn9130-db-A.dts                      |  55 ++++
  arch/arm/dts/cn9130-db-B.dts                      |  51 ++++
  arch/arm/dts/cn9130-db-dev-info.dtsi              |  44 +++
  arch/arm/dts/cn9130-db.dtsi                       | 316 
++++++++++++++++++++++
  arch/arm/dts/cn9131-db-A.dts                      |  54 ++++
  arch/arm/dts/cn9131-db-B.dts                      |  69 +++++
  arch/arm/dts/cn9131-db.dtsi                       | 166 ++++++++++++
  arch/arm/dts/cn9132-db-A.dts                      |  13 +
  arch/arm/dts/cn9132-db-B.dts                      |  13 +
  arch/arm/dts/cn9132-db.dtsi                       | 217 +++++++++++++++
  arch/arm/mach-mvebu/armada8k/cpu.c                |  70 ++---
  arch/arm/mach-mvebu/include/mach/fw_info.h        |  18 ++
  board/Marvell/octeontx2_cn913x/MAINTAINERS        |   1 +
  board/Marvell/octeontx2_cn913x/README             |  24 ++
  cmd/mvebu/Kconfig                                 |   9 +-
  cmd/mvebu/Makefile                                |   2 +-
  cmd/mvebu/{rx_training.c => comphy_rx_training.c} |  10 +-
  configs/mvebu_db_cn9130_defconfig                 |  89 ++++++
  configs/x530_defconfig                            |   2 +-
  drivers/net/mvpp2.c                               | 257 +++++++++++-------
  drivers/pci/pcie_dw_mvebu.c                       |  37 ++-
  drivers/spi/kirkwood_spi.c                        |  67 ++++-
  include/phy_interface.h                           |   4 +
  24 files changed, 1413 insertions(+), 181 deletions(-)
  create mode 100644 arch/arm/dts/cn9130-db-A.dts
  create mode 100644 arch/arm/dts/cn9130-db-B.dts
  create mode 100644 arch/arm/dts/cn9130-db-dev-info.dtsi
  create mode 100644 arch/arm/dts/cn9130-db.dtsi
  create mode 100644 arch/arm/dts/cn9131-db-A.dts
  create mode 100644 arch/arm/dts/cn9131-db-B.dts
  create mode 100644 arch/arm/dts/cn9131-db.dtsi
  create mode 100644 arch/arm/dts/cn9132-db-A.dts
  create mode 100644 arch/arm/dts/cn9132-db-B.dts
  create mode 100644 arch/arm/dts/cn9132-db.dtsi
  create mode 100644 arch/arm/mach-mvebu/include/mach/fw_info.h
  create mode 100644 board/Marvell/octeontx2_cn913x/README
  rename cmd/mvebu/{rx_training.c => comphy_rx_training.c} (74%)
  create mode 100644 configs/mvebu_db_cn9130_defconfig