[PATCH v5 07/10] arm: sunxi: add support for DIP detection to CHIP board
Andre Przywara
andre.przywara at arm.com
Thu May 13 13:01:29 CEST 2021
On Tue, 4 May 2021 19:31:27 +0200
Kory Maincent <kory.maincent at bootlin.com> wrote:
> Add the extension_board_scan specific function to scan the information
> of the EEPROM on one-wire and fill the extension struct.
> Add the Kconfig symbol to enable the needs to detect DIPs.
>
> Signed-off-by: Kory Maincent <kory.maincent at bootlin.com>
> Reviewed-by: Maxime Ripard <maxime at cerno.tech>
We needlessly compile this for the SPL, but the toolchain garbage
collection is clever enough to discard this, so it's not a problem.
Acked-by: Andre Przywara <andre.przywara at arm.com>
Thanks,
Andre
> ---
>
> Change since v1:
> - Replace TARGET_CHIP options by CHIP_DIP_SCAN
>
> Change since v2:
> - Fix typo
> - Place the Kconfig symbol in that patch
>
> Change since v3:
> - Replace imply CMD_EXTENSION by select option. Remove the build test on
> CMD_EXTENSION in the chip.c file.
>
> arch/arm/mach-sunxi/Kconfig | 9 ++++
> board/sunxi/Makefile | 1 +
> board/sunxi/chip.c | 100 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 110 insertions(+)
> create mode 100644 board/sunxi/chip.c
>
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 8e9012dbbf..bc8509b72a 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -1089,3 +1089,12 @@ config BLUETOOTH_DT_DEVICE_FIXUP
> flipped elsewise.
>
> endif
> +
> +config CHIP_DIP_SCAN
> + bool "Enable DIPs detection for CHIP board"
> + select SUPPORT_EXTENSION_SCAN
> + select W1
> + select W1_GPIO
> + select W1_EEPROM
> + select W1_EEPROM_DS24XXX
> + select CMD_EXTENSION
> diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
> index c4e13f8c38..d96b7897b6 100644
> --- a/board/sunxi/Makefile
> +++ b/board/sunxi/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_SUN7I_GMAC) += gmac.o
> obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o
> obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o
> obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o
> +obj-$(CONFIG_CHIP_DIP_SCAN) += chip.o
> diff --git a/board/sunxi/chip.c b/board/sunxi/chip.c
> new file mode 100644
> index 0000000000..cde04bebe9
> --- /dev/null
> +++ b/board/sunxi/chip.c
> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2021
> + * Köry Maincent, Bootlin, <kory.maincent at bootlin.com>
> + * Based on initial code from Maxime Ripard
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <dm.h>
> +#include <w1.h>
> +#include <w1-eeprom.h>
> +#include <dm/device-internal.h>
> +
> +#include <asm/arch/gpio.h>
> +
> +#include <extension_board.h>
> +
> +#define for_each_w1_device(b, d) \
> + for (device_find_first_child(b, d); *d; device_find_next_child(d))
> +
> +#define dip_convert(field) \
> + ( \
> + (sizeof(field) == 1) ? field : \
> + (sizeof(field) == 2) ? be16_to_cpu(field) : \
> + (sizeof(field) == 4) ? be32_to_cpu(field) : \
> + -1 \
> + )
> +
> +#define DIP_MAGIC 0x50494843 /* CHIP */
> +
> +struct dip_w1_header {
> + u32 magic; /* CHIP */
> + u8 version; /* spec version */
> + u32 vendor_id;
> + u16 product_id;
> + u8 product_version;
> + char vendor_name[32];
> + char product_name[32];
> + u8 rsvd[36]; /* rsvd for future spec versions */
> + u8 data[16]; /* user data, per-dip specific */
> +} __packed;
> +
> +int extension_board_scan(struct list_head *extension_list)
> +{
> + struct extension *dip;
> + struct dip_w1_header w1_header;
> + struct udevice *bus, *dev;
> + u32 vid;
> + u16 pid;
> + int ret;
> +
> + int num_dip = 0;
> +
> + sunxi_gpio_set_pull(SUNXI_GPD(2), SUNXI_GPIO_PULL_UP);
> +
> + ret = w1_get_bus(0, &bus);
> + if (ret) {
> + printf("one wire interface not found\n");
> + return 0;
> + }
> +
> + for_each_w1_device(bus, &dev) {
> + if (w1_get_device_family(dev) != W1_FAMILY_DS2431)
> + continue;
> +
> + ret = device_probe(dev);
> + if (ret) {
> + printf("Couldn't probe device %s: error %d",
> + dev->name, ret);
> + continue;
> + }
> +
> + w1_eeprom_read_buf(dev, 0, (u8 *)&w1_header, sizeof(w1_header));
> +
> + if (w1_header.magic != DIP_MAGIC)
> + continue;
> +
> + vid = dip_convert(w1_header.vendor_id);
> + pid = dip_convert(w1_header.product_id);
> +
> + printf("DIP: %s (0x%x) from %s (0x%x)\n",
> + w1_header.product_name, pid,
> + w1_header.vendor_name, vid);
> +
> + dip = calloc(1, sizeof(struct extension));
> + if (!dip) {
> + printf("Error in memory allocation\n");
> + return num_dip;
> + }
> +
> + snprintf(dip->overlay, sizeof(dip->overlay), "dip-%x-%x.dtbo",
> + vid, pid);
> + strncpy(dip->name, w1_header.product_name, 32);
> + strncpy(dip->owner, w1_header.vendor_name, 32);
> + list_add_tail(&dip->list, extension_list);
> + num_dip++;
> + }
> + return num_dip;
> +}
More information about the U-Boot
mailing list