[PATCH 05/27] m68k: Remove M5475x boards
Tom Rini
trini at konsulko.com
Sat May 15 03:34:10 CEST 2021
These board has not been converted to CONFIG_DM_PCI by the deadline.
Remove them. As this is the last of the mcf547x_8x family of boards,
remove that support as well.
Cc: TsiChung Liew <Tsi-Chung.Liew at nxp.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/m68k/Kconfig | 15 -
arch/m68k/Makefile | 2 -
arch/m68k/cpu/mcf547x_8x/Makefile | 9 -
arch/m68k/cpu/mcf547x_8x/cpu.c | 153 ---------
arch/m68k/cpu/mcf547x_8x/cpu_init.c | 150 ---------
arch/m68k/cpu/mcf547x_8x/interrupts.c | 35 ---
arch/m68k/cpu/mcf547x_8x/pci.c | 154 ---------
arch/m68k/cpu/mcf547x_8x/slicetimer.c | 95 ------
arch/m68k/cpu/mcf547x_8x/speed.c | 33 --
arch/m68k/cpu/mcf547x_8x/start.S | 264 ----------------
arch/m68k/dts/M5475AFE.dts | 21 --
arch/m68k/dts/M5475BFE.dts | 21 --
arch/m68k/dts/M5475CFE.dts | 21 --
arch/m68k/dts/M5475DFE.dts | 21 --
arch/m68k/dts/M5475EFE.dts | 21 --
arch/m68k/dts/M5475FFE.dts | 21 --
arch/m68k/dts/M5475GFE.dts | 21 --
arch/m68k/dts/Makefile | 7 -
arch/m68k/include/asm/cache.h | 2 +-
arch/m68k/include/asm/coldfire/dspi.h | 6 -
arch/m68k/include/asm/coldfire/eport.h | 13 -
arch/m68k/include/asm/fec.h | 5 -
arch/m68k/include/asm/immap_547x_8x.h | 258 ---------------
arch/m68k/include/asm/m547x_8x.h | 417 -------------------------
arch/m68k/lib/cache.c | 2 +-
board/freescale/m547xevb/Kconfig | 15 -
board/freescale/m547xevb/MAINTAINERS | 12 -
board/freescale/m547xevb/Makefile | 6 -
board/freescale/m547xevb/README | 271 ----------------
board/freescale/m547xevb/m547xevb.c | 108 -------
configs/M5475AFE_defconfig | 32 --
configs/M5475BFE_defconfig | 32 --
configs/M5475CFE_defconfig | 32 --
configs/M5475DFE_defconfig | 32 --
configs/M5475EFE_defconfig | 32 --
configs/M5475FFE_defconfig | 32 --
configs/M5475GFE_defconfig | 32 --
doc/arch/m68k.rst | 2 +-
drivers/net/mcfmii.c | 4 -
env/Kconfig | 2 +-
include/configs/M5475EVB.h | 241 --------------
include/fsl_dspi.h | 6 -
42 files changed, 4 insertions(+), 2654 deletions(-)
delete mode 100644 arch/m68k/cpu/mcf547x_8x/Makefile
delete mode 100644 arch/m68k/cpu/mcf547x_8x/cpu.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/cpu_init.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/interrupts.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/pci.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/slicetimer.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/speed.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/start.S
delete mode 100644 arch/m68k/dts/M5475AFE.dts
delete mode 100644 arch/m68k/dts/M5475BFE.dts
delete mode 100644 arch/m68k/dts/M5475CFE.dts
delete mode 100644 arch/m68k/dts/M5475DFE.dts
delete mode 100644 arch/m68k/dts/M5475EFE.dts
delete mode 100644 arch/m68k/dts/M5475FFE.dts
delete mode 100644 arch/m68k/dts/M5475GFE.dts
delete mode 100644 arch/m68k/include/asm/immap_547x_8x.h
delete mode 100644 arch/m68k/include/asm/m547x_8x.h
delete mode 100644 board/freescale/m547xevb/Kconfig
delete mode 100644 board/freescale/m547xevb/MAINTAINERS
delete mode 100644 board/freescale/m547xevb/Makefile
delete mode 100644 board/freescale/m547xevb/README
delete mode 100644 board/freescale/m547xevb/m547xevb.c
delete mode 100644 configs/M5475AFE_defconfig
delete mode 100644 configs/M5475BFE_defconfig
delete mode 100644 configs/M5475CFE_defconfig
delete mode 100644 configs/M5475DFE_defconfig
delete mode 100644 configs/M5475EFE_defconfig
delete mode 100644 configs/M5475FFE_defconfig
delete mode 100644 configs/M5475GFE_defconfig
delete mode 100644 include/configs/M5475EVB.h
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index f7f6d08be3f5..cf45d789d63d 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -65,12 +65,6 @@ config MCF5227x
select DM_SERIAL
bool
-config MCF547x_8x
- select OF_CONTROL
- select DM
- select DM_SERIAL
- bool
-
# processor type
config M5208
bool
@@ -137,10 +131,6 @@ config M52277
bool
select MCF5227x
-config M547x
- bool
- select MCF547x_8x
-
choice
prompt "Target select"
optional
@@ -213,10 +203,6 @@ config TARGET_M54455EVB
bool "Support M54455EVB"
select M54455
-config TARGET_M5475EVB
- bool "Support M5475EVB"
- select M547x
-
config TARGET_AMCORE
bool "Support AMCORE"
select M5307
@@ -244,7 +230,6 @@ source "board/freescale/m5373evb/Kconfig"
source "board/freescale/m54418twr/Kconfig"
source "board/freescale/m54451evb/Kconfig"
source "board/freescale/m54455evb/Kconfig"
-source "board/freescale/m547xevb/Kconfig"
source "board/sysam/amcore/Kconfig"
source "board/sysam/stmark2/Kconfig"
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 7f23ff45887a..86b36e1a40e7 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -19,14 +19,12 @@ cpuflags-$(CONFIG_MCF5301x) := -mcpu=53015 -fPIC
cpuflags-$(CONFIG_MCF532x) := -mcpu=5329 -fPIC
cpuflags-$(CONFIG_MCF5441x) := -mcpu=54418 -fPIC
cpuflags-$(CONFIG_MCF5445x) := -mcpu=54455 -fPIC
-cpuflags-$(CONFIG_MCF547x_8x) := -mcpu=5485 -fPIC
PLATFORM_CPPFLAGS += $(cpuflags-y)
ldflags-$(CONFIG_MCF5441x) := --got=single
ldflags-$(CONFIG_MCF5445x) := --got=single
-ldflags-$(CONFIG_MCF547x_8x) := --got=single
ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
ifneq (,$(findstring GOT,$(shell $(LD) --help)))
diff --git a/arch/m68k/cpu/mcf547x_8x/Makefile b/arch/m68k/cpu/mcf547x_8x/Makefile
deleted file mode 100644
index 0db3386aa850..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-# ccflags-y += -DET_DEBUG
-
-extra-y = start.o
-obj-y = cpu.o speed.o cpu_init.o pci.o interrupts.o slicetimer.o
diff --git a/arch/m68k/cpu/mcf547x_8x/cpu.c b/arch/m68k/cpu/mcf547x_8x/cpu.c
deleted file mode 100644
index c1361e705799..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/cpu.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <vsprintf.h>
-#include <watchdog.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/global_data.h>
-
-#include <asm/immap.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- out_be16(&gptmr->pre, 10);
- out_be16(&gptmr->cnt, 1);
-
- /* enable watchdog, set timeout to 0 and wait */
- out_8(&gptmr->mode, GPT_TMS_SGPIO);
- out_8(&gptmr->ctrl, GPT_CTRL_WDEN | GPT_CTRL_CE);
-
- /* we don't return! */
- return 1;
-};
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
- siu_t *siu = (siu_t *) MMAP_SIU;
- u16 id = 0;
-
- puts("CPU: ");
-
- switch ((in_be32(&siu->jtagid) & 0x000FF000) >> 12) {
- case 0x0C:
- id = 5485;
- break;
- case 0x0D:
- id = 5484;
- break;
- case 0x0E:
- id = 5483;
- break;
- case 0x0F:
- id = 5482;
- break;
- case 0x10:
- id = 5481;
- break;
- case 0x11:
- id = 5480;
- break;
- case 0x12:
- id = 5475;
- break;
- case 0x13:
- id = 5474;
- break;
- case 0x14:
- id = 5473;
- break;
- case 0x15:
- id = 5472;
- break;
- case 0x16:
- id = 5471;
- break;
- case 0x17:
- id = 5470;
- break;
- }
-
- if (id) {
- char buf1[32], buf2[32];
-
- printf("Freescale MCF%d\n", id);
- printf(" CPU CLK %s MHz BUS CLK %s MHz\n",
- strmhz(buf1, gd->cpu_clk),
- strmhz(buf2, gd->bus_clk));
- }
-
- return 0;
-};
-#endif /* CONFIG_DISPLAY_CPUINFO */
-
-#if defined(CONFIG_HW_WATCHDOG)
-/* Called by macro WATCHDOG_RESET */
-void hw_watchdog_reset(void)
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- out_8(&gptmr->ocpw, 0xa5);
-}
-
-int watchdog_disable(void)
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */
- out_8(&gptmr->mode, 0);
- out_8(&gptmr->ctrl, 0);
-
- puts("WATCHDOG:disabled\n");
-
- return (0);
-}
-
-int watchdog_init(void)
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- out_be16(&gptmr->pre, CONFIG_WATCHDOG_TIMEOUT);
- out_be16(&gptmr->cnt, CONFIG_SYS_TIMER_PRESCALER * 1000);
-
- out_8(&gptmr->mode, GPT_TMS_SGPIO);
- out_8(&gptmr->ctrl, GPT_CTRL_CE | GPT_CTRL_WDEN);
- puts("WATCHDOG:enabled\n");
-
- return (0);
-}
-#endif /* CONFIG_HW_WATCHDOG */
-
-#if defined(CONFIG_FSLDMAFEC) || defined(CONFIG_MCFFEC)
-/* Default initializations for MCFFEC controllers. To override,
- * create a board-specific function called:
- * int board_eth_init(struct bd_info *bis)
- */
-
-int cpu_eth_init(struct bd_info *bis)
-{
-#if defined(CONFIG_FSLDMAFEC)
- mcdmafec_initialize(bis);
-#endif
-#if defined(CONFIG_MCFFEC)
- mcffec_initialize(bis);
-#endif
- return 0;
-}
-#endif
diff --git a/arch/m68k/cpu/mcf547x_8x/cpu_init.c b/arch/m68k/cpu/mcf547x_8x/cpu_init.c
deleted file mode 100644
index 8e42b6314123..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/cpu_init.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <MCD_dma.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_CMD_NET)
-#include <config.h>
-#include <net.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f(void)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
- xlbarb_t *xlbarb = (xlbarb_t *) MMAP_XARB;
-
- out_be32(&xlbarb->adrto, 0x2000);
- out_be32(&xlbarb->datto, 0x2500);
- out_be32(&xlbarb->busto, 0x3000);
-
- out_be32(&xlbarb->cfg, XARB_CFG_AT | XARB_CFG_DT);
-
- /* Master Priority Enable */
- out_be32(&xlbarb->prien, 0xff);
- out_be32(&xlbarb->pri, 0);
-
-#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
- out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
- out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
- out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
- out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
- out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
- out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
- out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
- out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
- out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
- out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
- out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
- out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
- out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
- out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
- out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
- out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
- out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
- out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
-#endif
-
-#ifdef CONFIG_SYS_I2C_FSL
- out_be16(&gpio->par_feci2cirq,
- GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA);
-#endif
-
- icache_enable();
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r(void)
-{
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC)
- MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512),
- MCD_RELOC_TASKS);
-#endif
- return (0);
-}
-
-void uart_port_conf(int port)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40);
-
- /* Setup Ports: */
- switch (port) {
- case 0:
- out_8(&gpio->par_psc0, GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
- break;
- case 1:
- out_8(&gpio->par_psc1, GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1);
- break;
- case 2:
- out_8(&gpio->par_psc2, GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2);
- break;
- case 3:
- out_8(&gpio->par_psc3, GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3);
- break;
- }
-
- clrbits_8(pscsicr, 0x07);
-}
-
-#if defined(CONFIG_CMD_NET)
-int fecpin_setclear(fec_info_t *info, int setclear)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- u32 fec0_base;
-
- if (fec_get_base_addr(0, &fec0_base))
- return -1;
-
- if (setclear) {
- if (info->iobase == fec0_base)
- setbits_be16(&gpio->par_feci2cirq, 0xf000);
- else
- setbits_be16(&gpio->par_feci2cirq, 0x0fc0);
- } else {
- if (info->iobase == fec0_base)
- clrbits_be16(&gpio->par_feci2cirq, 0xf000);
- else
- clrbits_be16(&gpio->par_feci2cirq, 0x0fc0);
- }
- return 0;
-}
-#endif
diff --git a/arch/m68k/cpu/mcf547x_8x/interrupts.c b/arch/m68k/cpu/mcf547x_8x/interrupts.c
deleted file mode 100644
index 703090ddc258..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/interrupts.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-/* CPU specific interrupt routine */
-#include <common.h>
-#include <irq_func.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-int interrupt_init(void)
-{
- int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
-
- /* Make sure all interrupts are disabled */
- setbits_be32(&intp->imrh0, 0xffffffff);
- setbits_be32(&intp->imrl0, 0xffffffff);
-
- enable_interrupts();
-
- return 0;
-}
-
-#if defined(CONFIG_SLTTMR)
-void dtimer_intr_setup(void)
-{
- int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
-
- out_8(&intp->icr0[CONFIG_SYS_TMRINTR_NO], CONFIG_SYS_TMRINTR_PRI);
- clrbits_be32(&intp->imrh0, CONFIG_SYS_TMRINTR_MASK);
-}
-#endif
diff --git a/arch/m68k/cpu/mcf547x_8x/pci.c b/arch/m68k/cpu/mcf547x_8x/pci.c
deleted file mode 100644
index 74ba68124f1a..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/pci.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-/*
- * PCI Configuration space access support
- */
-#include <common.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/immap.h>
-#include <linux/delay.h>
-
-#if defined(CONFIG_PCI)
-/* System RAM mapped over PCI */
-#define CONFIG_SYS_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
-
-#define cfg_read(val, addr, type, op) *val = op((type)(addr));
-#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
-
-#define PCI_OP(rw, size, type, op, mask) \
-int pci_##rw##_cfg_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, type val) \
-{ \
- u32 addr = 0; \
- u16 cfg_type = 0; \
- addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
- out_be32(hose->cfg_addr, addr); \
- cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- __asm__ __volatile__("nop"); \
- __asm__ __volatile__("nop"); \
- out_be32(hose->cfg_addr, addr & 0x7fffffff); \
- return 0; \
-}
-
-PCI_OP(read, byte, u8 *, in_8, 3)
-PCI_OP(read, word, u16 *, in_le16, 2)
-PCI_OP(write, byte, u8, out_8, 3)
-PCI_OP(write, word, u16, out_le16, 2)
-PCI_OP(write, dword, u32, out_le32, 0)
-
-int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,
- int offset, u32 * val)
-{
- u32 addr;
- u32 tmpv;
- u32 mask = 2; /* word access */
- /* Read lower 16 bits */
- addr = ((offset & 0xfc) | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- __asm__ __volatile__("nop");
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
-
- /* Read upper 16 bits */
- offset += 2;
- addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- __asm__ __volatile__("nop");
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
-
- /* combine results into dword value */
- *val = (tmpv << 16) | *val;
-
- return 0;
-}
-
-void pci_mcf547x_8x_init(struct pci_controller *hose)
-{
- pci_t *pci = (pci_t *) MMAP_PCI;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- /* Port configuration */
- out_be16(&gpio->par_pcibg,
- GPIO_PAR_PCIBG_PCIBG0(3) | GPIO_PAR_PCIBG_PCIBG1(3) |
- GPIO_PAR_PCIBG_PCIBG2(3) | GPIO_PAR_PCIBG_PCIBG3(3) |
- GPIO_PAR_PCIBG_PCIBG4(3));
- out_be16(&gpio->par_pcibr,
- GPIO_PAR_PCIBR_PCIBR0(3) | GPIO_PAR_PCIBR_PCIBR1(3) |
- GPIO_PAR_PCIBR_PCIBR2(3) | GPIO_PAR_PCIBR_PCIBR3(3) |
- GPIO_PAR_PCIBR_PCIBR4(3));
-
- /* Assert reset bit */
- setbits_be32(&pci->gscr, PCI_GSCR_PR);
-
- out_be32(&pci->tcr1, PCI_TCR1_P);
-
- /* Initiator windows */
- out_be32(&pci->iw0btar,
- CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16));
- out_be32(&pci->iw1btar,
- CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16));
- out_be32(&pci->iw2btar,
- CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16));
-
- out_be32(&pci->iwcr,
- PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
- PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO);
-
- out_be32(&pci->icr, 0);
-
- /* Enable bus master and mem access */
- out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M);
-
- /* Cache line size and master latency */
- out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xf8));
- out_be32(&pci->cr2, 0);
-
-#ifdef CONFIG_SYS_PCI_BAR0
- out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0));
- out_be32(&pci->tbatr0a, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN);
-#endif
-#ifdef CONFIG_SYS_PCI_BAR1
- out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1));
- out_be32(&pci->tbatr1a, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN);
-#endif
-
- /* Deassert reset bit */
- clrbits_be32(&pci->gscr, PCI_GSCR_PR);
- udelay(1000);
-
- /* Enable PCI bus master support */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
- CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
- CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
-
- pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
- CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 3;
-
- hose->cfg_addr = &(pci->car);
- hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
-
- pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
- pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
- pci_write_cfg_dword);
-
- /* Hose scan */
- pci_register_hose(hose);
- hose->last_busno = pci_hose_scan(hose);
-}
-#endif /* CONFIG_PCI */
diff --git a/arch/m68k/cpu/mcf547x_8x/slicetimer.c b/arch/m68k/cpu/mcf547x_8x/slicetimer.c
deleted file mode 100644
index dc076fc6e814..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/slicetimer.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <irq_func.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <asm/timer.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static ulong timestamp;
-
-#if defined(CONFIG_SLTTMR)
-#ifndef CONFIG_SYS_UDELAY_BASE
-# error "uDelay base not defined!"
-#endif
-
-#if !defined(CONFIG_SYS_TMR_BASE) || !defined(CONFIG_SYS_INTR_BASE) || !defined(CONFIG_SYS_TMRINTR_NO) || !defined(CONFIG_SYS_TMRINTR_MASK)
-# error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!"
-#endif
-extern void dtimer_intr_setup(void);
-
-void __udelay(unsigned long usec)
-{
- slt_t *timerp = (slt_t *) (CONFIG_SYS_UDELAY_BASE);
- u32 now, freq;
-
- /* 1 us period */
- freq = CONFIG_SYS_TIMER_PRESCALER;
-
- /* Disable */
- out_be32(&timerp->cr, 0);
- out_be32(&timerp->tcnt, usec * freq);
- out_be32(&timerp->cr, SLT_CR_TEN);
-
- now = in_be32(&timerp->cnt);
- while (now != 0)
- now = in_be32(&timerp->cnt);
-
- setbits_be32(&timerp->sr, SLT_SR_ST);
- out_be32(&timerp->cr, 0);
-}
-
-void dtimer_interrupt(void *not_used)
-{
- slt_t *timerp = (slt_t *) (CONFIG_SYS_TMR_BASE);
-
- /* check for timer interrupt asserted */
- if ((CONFIG_SYS_TMRPND_REG & CONFIG_SYS_TMRINTR_MASK) == CONFIG_SYS_TMRINTR_PEND) {
- setbits_be32(&timerp->sr, SLT_SR_ST);
- timestamp++;
- return;
- }
-}
-
-int timer_init(void)
-{
- slt_t *timerp = (slt_t *) (CONFIG_SYS_TMR_BASE);
-
- timestamp = 0;
-
- /* disable timer */
- out_be32(&timerp->cr, 0);
- out_be32(&timerp->tcnt, 0);
- /* clear status */
- out_be32(&timerp->sr, SLT_SR_BE | SLT_SR_ST);
-
- /* initialize and enable timer interrupt */
- irq_install_handler(CONFIG_SYS_TMRINTR_NO, dtimer_interrupt, 0);
-
- /* Interrupt every ms */
- out_be32(&timerp->tcnt, 1000 * CONFIG_SYS_TIMER_PRESCALER);
-
- dtimer_intr_setup();
-
- /* set a period of 1us, set timer mode to restart and
- enable timer and interrupt */
- out_be32(&timerp->cr, SLT_CR_RUN | SLT_CR_IEN | SLT_CR_TEN);
- return 0;
-}
-
-ulong get_timer(ulong base)
-{
- return (timestamp - base);
-}
-
-#endif /* CONFIG_SLTTMR */
diff --git a/arch/m68k/cpu/mcf547x_8x/speed.c b/arch/m68k/cpu/mcf547x_8x/speed.c
deleted file mode 100644
index bbcf601f38fb..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/speed.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <asm/global_data.h>
-#include <asm/processor.h>
-
-#include <asm/immap.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
-int get_clocks(void)
-{
- gd->bus_clk = CONFIG_SYS_CLK;
- gd->cpu_clk = (gd->bus_clk * 2);
-
-#ifdef CONFIG_SYS_I2C_FSL
- gd->arch.i2c1_clk = gd->bus_clk;
-#endif
-
- return (0);
-}
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
deleted file mode 100644
index b70842b2b83d..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ /dev/null
@@ -1,264 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner at telex.de>
- * Based on code from Bernhard Kuhn <bkuhn at metrowerks.com>
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include "version.h"
-#include <asm/cache.h>
-
-#define _START _start
-#define _FAULT _fault
-
-#define SAVE_ALL \
- move.w #0x2700,%sr; /* disable intrs */ \
- subl #60,%sp; /* space for 15 regs */ \
- moveml %d0-%d7/%a0-%a6,%sp@;
-
-#define RESTORE_ALL \
- moveml %sp@,%d0-%d7/%a0-%a6; \
- addl #60,%sp; /* space for 15 regs */ \
- rte;
-
-.text
-
-/*
- * Vector table. This is used for initial platform startup.
- * These vectors are to catch any un-intended traps.
- */
-_vectors:
-INITSP: .long 0x00000000 /* Initial SP */
-INITPC: .long _START /* Initial PC */
-
-vector02_0F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-/* Reserved */
-vector10_17:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector18_1F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-/* TRAP #0 - #15 */
-vector20_2F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-/* Reserved */
-vector30_3F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector64_127:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector128_191:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector192_255:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-.text
-
-.globl _start
-_start:
- nop
- nop
- move.w #0x2700,%sr /* Mask off Interrupt */
-
- /* Set vector base register at the beginning of the Flash */
- move.l #CONFIG_SYS_FLASH_BASE, %d0
- movec %d0, %VBR
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
- movec %d0, %RAMBAR0
-
- move.l #(CONFIG_SYS_INIT_RAM1_ADDR + CONFIG_SYS_INIT_RAM1_CTRL), %d0
- movec %d0, %RAMBAR1
-
- move.l #CONFIG_SYS_MBAR, %d0 /* set MBAR address */
- move.c %d0, %MBAR
-
- /* invalidate and disable cache */
- move.l #0x01040100, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0, %d0
- movec %d0, %ACR0
- movec %d0, %ACR1
- movec %d0, %ACR2
- movec %d0, %ACR3
-
- /* initialize general use internal ram */
- move.l #0, %d0
- move.l #(ICACHE_STATUS), %a1 /* icache */
- move.l #(DCACHE_STATUS), %a2 /* icache */
- move.l %d0, (%a1)
- move.l %d0, (%a2)
-
- /* put relocation table address to a5 */
- move.l #__got_start, %a5
-
- /* setup stack initially on top of internal static ram */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
-
- /*
- * if configured, malloc_f arena will be reserved first,
- * then (and always) gd struct space will be reserved
- */
- move.l %sp, -(%sp)
- move.l #board_init_f_alloc_reserve, %a1
- jsr (%a1)
-
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
-
- /* initialize reserved area */
- move.l %d0, -(%sp)
- move.l #board_init_f_init_reserve, %a1
- jsr (%a1)
-
- /* run low-level CPU init code (from flash) */
- jbsr cpu_init_f
-
- /* run low-level board init code (from flash) */
- clr.l %sp at -
- jbsr board_init_f
-
- /* board_init_f() does not return */
-
-/******************************************************************************/
-
-/*
- * void relocate_code(addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
-.globl relocate_code
-relocate_code:
- link.w %a6,#0
- move.l 8(%a6), %sp /* set new stack pointer */
-
- move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
- move.l 16(%a6), %a0 /* Save copy of Destination Address */
-
- move.l #CONFIG_SYS_MONITOR_BASE, %a1
- move.l #__init_end, %a2
- move.l %a0, %a3
-
- /* copy the code to RAM */
-1:
- move.l (%a1)+, (%a3)+
- cmp.l %a1,%a2
- bgt.s 1b
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- move.l %a0, %a1
- add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
- jmp (%a1)
-
-in_ram:
-
-clear_bss:
- /*
- * Now clear BSS segment
- */
- move.l %a0, %a1
- add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
- move.l %a0, %d1
- add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
-6:
- clr.l (%a1)+
- cmp.l %a1,%d1
- bgt.s 6b
-
- /*
- * fix got table in RAM
- */
- move.l %a0, %a1
- add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
- move.l %a1,%a5 /* fix got pointer register a5 */
-
- move.l %a0, %a2
- add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
-
-7:
- move.l (%a1),%d1
- sub.l #_start,%d1
- add.l %a0,%d1
- move.l %d1,(%a1)+
- cmp.l %a2, %a1
- bne 7b
-
- /* calculate relative jump to board_init_r in ram */
- move.l %a0, %a1
- add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
-
- /* set parameters for board_init_r */
- move.l %a0,-(%sp) /* dest_addr */
- move.l %d0,-(%sp) /* gd */
- jsr (%a1)
-
-/******************************************************************************/
-
-/* exception code */
-.globl _fault
-_fault:
- bra _fault
-
-.globl _exc_handler
-_exc_handler:
- SAVE_ALL
- movel %sp,%sp at -
- bsr exc_handler
- addql #4,%sp
- RESTORE_ALL
-
-.globl _int_handler
-_int_handler:
- SAVE_ALL
- movel %sp,%sp at -
- bsr int_handler
- addql #4,%sp
- RESTORE_ALL
-
-/******************************************************************************/
-
-.globl version_string
-version_string:
-.ascii U_BOOT_VERSION_STRING, "\0"
-.align 4
diff --git a/arch/m68k/dts/M5475AFE.dts b/arch/m68k/dts/M5475AFE.dts
deleted file mode 100644
index 7895b520cf72..000000000000
--- a/arch/m68k/dts/M5475AFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo at sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475AFE";
- compatible = "fsl,M5475AFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475BFE.dts b/arch/m68k/dts/M5475BFE.dts
deleted file mode 100644
index ffbc2d6a063e..000000000000
--- a/arch/m68k/dts/M5475BFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo at sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475BFE";
- compatible = "fsl,M5475BFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475CFE.dts b/arch/m68k/dts/M5475CFE.dts
deleted file mode 100644
index f1033f7efbbf..000000000000
--- a/arch/m68k/dts/M5475CFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo at sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475CFE";
- compatible = "fsl,M5475CFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475DFE.dts b/arch/m68k/dts/M5475DFE.dts
deleted file mode 100644
index 69a8faba83ba..000000000000
--- a/arch/m68k/dts/M5475DFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo at sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475DFE";
- compatible = "fsl,M5475DFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475EFE.dts b/arch/m68k/dts/M5475EFE.dts
deleted file mode 100644
index 3c898958c8fa..000000000000
--- a/arch/m68k/dts/M5475EFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo at sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475EFE";
- compatible = "fsl,M5475EFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475FFE.dts b/arch/m68k/dts/M5475FFE.dts
deleted file mode 100644
index bb3c21588f54..000000000000
--- a/arch/m68k/dts/M5475FFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo at sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475FFE";
- compatible = "fsl,M5475FFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475GFE.dts b/arch/m68k/dts/M5475GFE.dts
deleted file mode 100644
index 75080fa7371e..000000000000
--- a/arch/m68k/dts/M5475GFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo at sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475GFE";
- compatible = "fsl,M5475GFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/Makefile b/arch/m68k/dts/Makefile
index 0a356b8e3728..47260a101d8a 100644
--- a/arch/m68k/dts/Makefile
+++ b/arch/m68k/dts/Makefile
@@ -32,13 +32,6 @@ dtb-$(CONFIG_TARGET_M54455EVB) += M54455EVB.dtb \
M54455EVB_i66.dtb
dtb-$(CONFIG_TARGET_AMCORE) += amcore.dtb
dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb
-dtb-$(CONFIG_TARGET_M5475EVB) += M5475AFE.dtb \
- M5475BFE.dtb \
- M5475CFE.dtb \
- M5475DFE.dtb \
- M5475EFE.dtb \
- M5475FFE.dtb \
- M5475GFE.dtb
targets += $(dtb-y)
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index a1eeabc2af93..fabec0ae92e3 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -19,7 +19,7 @@
#define CONFIG_CF_V3
#endif
-#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x)
+#if defined(CONFIG_MCF5445x)
#define CONFIG_CF_V4
#elif defined(CONFIG_MCF5441x)
#define CONFIG_CF_V4E /* Four Extra ACRn */
diff --git a/arch/m68k/include/asm/coldfire/dspi.h b/arch/m68k/include/asm/coldfire/dspi.h
index ddd8f3380542..7848dbdff490 100644
--- a/arch/m68k/include/asm/coldfire/dspi.h
+++ b/arch/m68k/include/asm/coldfire/dspi.h
@@ -20,14 +20,8 @@ typedef struct dspi {
u32 tfr; /* 0x34 - PUSHR */
u16 resv1; /* 0x38 */
u16 rfr; /* 0x3A - POPR */
-#ifdef CONFIG_MCF547x_8x
- u32 tfdr[4]; /* 0x3C */
- u8 resv2[0x30]; /* 0x40 */
- u32 rfdr[4]; /* 0x7C */
-#else
u32 tfdr[16]; /* 0x3C */
u32 rfdr[16]; /* 0x7C */
-#endif
} dspi_t;
/* Module configuration */
diff --git a/arch/m68k/include/asm/coldfire/eport.h b/arch/m68k/include/asm/coldfire/eport.h
index 0e64bef5ed62..eb5c66636129 100644
--- a/arch/m68k/include/asm/coldfire/eport.h
+++ b/arch/m68k/include/asm/coldfire/eport.h
@@ -11,18 +11,6 @@
/* Edge Port Module (EPORT) */
typedef struct eport {
-#ifdef CONFIG_MCF547x_8x
- u16 par; /* 0x00 */
- u16 res0; /* 0x02 */
- u8 ddr; /* 0x04 */
- u8 ier; /* 0x05 */
- u16 res1; /* 0x06 */
- u8 dr; /* 0x08 */
- u8 pdr; /* 0x09 */
- u16 res2; /* 0x0A */
- u8 fr; /* 0x0C */
- u8 res3[3]; /* 0x0D */
-#else
u16 par; /* 0x00 Pin Assignment */
u8 ddr; /* 0x02 Data Direction */
u8 ier; /* 0x03 Interrupt Enable */
@@ -30,7 +18,6 @@ typedef struct eport {
u8 pdr; /* 0x05 Pin Data */
u8 fr; /* 0x06 Flag */
u8 res0;
-#endif
} eport_t;
/* EPPAR */
diff --git a/arch/m68k/include/asm/fec.h b/arch/m68k/include/asm/fec.h
index cdb8119d3ea9..759c8cfc43de 100644
--- a/arch/m68k/include/asm/fec.h
+++ b/arch/m68k/include/asm/fec.h
@@ -337,13 +337,8 @@ typedef struct fec {
#define FEC_RESET_DELAY 100
#define FEC_RX_TOUT 100
-#ifdef CONFIG_MCF547x_8x
-typedef struct fec_info_dma fec_info_t;
-#define FEC_T fecdma_t
-#else
typedef struct fec_info_s fec_info_t;
#define FEC_T fec_t
-#endif
int fecpin_setclear(fec_info_t *info, int setclear);
int mii_discover_phy(fec_info_t *info);
diff --git a/arch/m68k/include/asm/immap_547x_8x.h b/arch/m68k/include/asm/immap_547x_8x.h
deleted file mode 100644
index 5e1345684de0..000000000000
--- a/arch/m68k/include/asm/immap_547x_8x.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF547x_8x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#ifndef __IMMAP_547x_8x__
-#define __IMMAP_547x_8x__
-
-#define MMAP_SIU (CONFIG_SYS_MBAR + 0x00000000)
-#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x00000100)
-#define MMAP_XARB (CONFIG_SYS_MBAR + 0x00000240)
-#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000500)
-#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00000700)
-#define MMAP_GPTMR (CONFIG_SYS_MBAR + 0x00000800)
-#define MMAP_SLT0 (CONFIG_SYS_MBAR + 0x00000900)
-#define MMAP_SLT1 (CONFIG_SYS_MBAR + 0x00000910)
-#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000A00)
-#define MMAP_PCI (CONFIG_SYS_MBAR + 0x00000B00)
-#define MMAP_PCIARB (CONFIG_SYS_MBAR + 0x00000C00)
-#define MMAP_EXTDMA (CONFIG_SYS_MBAR + 0x00000D00)
-#define MMAP_EPORT (CONFIG_SYS_MBAR + 0x00000F00)
-#define MMAP_CTM (CONFIG_SYS_MBAR + 0x00007F00)
-#define MMAP_MCDMA (CONFIG_SYS_MBAR + 0x00008000)
-#define MMAP_SCPCI (CONFIG_SYS_MBAR + 0x00008400)
-#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00008600)
-#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00008700)
-#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00008800)
-#define MMAP_UART3 (CONFIG_SYS_MBAR + 0x00008900)
-#define MMAP_DSPI (CONFIG_SYS_MBAR + 0x00008A00)
-#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00008F00)
-#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00009000)
-#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00009800)
-#define MMAP_CAN0 (CONFIG_SYS_MBAR + 0x0000A000)
-#define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x0000A800)
-#define MMAP_USBD (CONFIG_SYS_MBAR + 0x0000B000)
-#define MMAP_SRAM (CONFIG_SYS_MBAR + 0x00010000)
-#define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001FF00)
-#define MMAP_SEC (CONFIG_SYS_MBAR + 0x00020000)
-
-#include <asm/coldfire/dspi.h>
-#include <asm/coldfire/eport.h>
-#include <asm/coldfire/flexbus.h>
-#include <asm/coldfire/flexcan.h>
-#include <asm/coldfire/intctrl.h>
-
-typedef struct siu {
- u32 mbar; /* 0x00 */
- u32 drv; /* 0x04 */
- u32 rsvd1[2]; /* 0x08 - 0x1F */
- u32 sbcr; /* 0x10 */
- u32 rsvd2[3]; /* 0x14 - 0x1F */
- u32 cs0cfg; /* 0x20 */
- u32 cs1cfg; /* 0x24 */
- u32 cs2cfg; /* 0x28 */
- u32 cs3cfg; /* 0x2C */
- u32 rsvd3[2]; /* 0x30 - 0x37 */
- u32 secsacr; /* 0x38 */
- u32 rsvd4[2]; /* 0x3C - 0x43 */
- u32 rsr; /* 0x44 */
- u32 rsvd5[2]; /* 0x48 - 0x4F */
- u32 jtagid; /* 0x50 */
-} siu_t;
-
-typedef struct sdram {
- u32 mode; /* 0x00 */
- u32 ctrl; /* 0x04 */
- u32 cfg1; /* 0x08 */
- u32 cfg2; /* 0x0c */
-} sdram_t;
-
-typedef struct xlb_arb {
- u32 cfg; /* 0x240 */
- u32 ver; /* 0x244 */
- u32 sr; /* 0x248 */
- u32 imr; /* 0x24c */
- u32 adrcap; /* 0x250 */
- u32 sigcap; /* 0x254 */
- u32 adrto; /* 0x258 */
- u32 datto; /* 0x25c */
- u32 busto; /* 0x260 */
- u32 prien; /* 0x264 */
- u32 pri; /* 0x268 */
-} xlbarb_t;
-
-typedef struct gptmr {
- u8 ocpw;
- u8 octict;
- u8 ctrl;
- u8 mode;
-
- u16 pre; /* Prescale */
- u16 cnt;
-
- u16 pwmwidth;
- u8 pwmop; /* Output Polarity */
- u8 pwmld; /* Immediate Update */
-
- u16 cap; /* Capture internal counter */
- u8 ovfpin; /* Ovf and Pin */
- u8 intr; /* Interrupts */
-} gptmr_t;
-
-typedef struct canex_ctrl {
- can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */
-} canex_t;
-
-
-typedef struct slt {
- u32 tcnt; /* 0x00 */
- u32 cr; /* 0x04 */
- u32 cnt; /* 0x08 */
- u32 sr; /* 0x0C */
-} slt_t;
-
-typedef struct gpio {
- /* Port Output Data Registers */
- u8 podr_fbctl; /*0x00 */
- u8 podr_fbcs; /*0x01 */
- u8 podr_dma; /*0x02 */
- u8 rsvd1; /*0x03 */
- u8 podr_fec0h; /*0x04 */
- u8 podr_fec0l; /*0x05 */
- u8 podr_fec1h; /*0x06 */
- u8 podr_fec1l; /*0x07 */
- u8 podr_feci2c; /*0x08 */
- u8 podr_pcibg; /*0x09 */
- u8 podr_pcibr; /*0x0A */
- u8 rsvd2; /*0x0B */
- u8 podr_psc3psc2; /*0x0C */
- u8 podr_psc1psc0; /*0x0D */
- u8 podr_dspi; /*0x0E */
- u8 rsvd3; /*0x0F */
-
- /* Port Data Direction Registers */
- u8 pddr_fbctl; /*0x10 */
- u8 pddr_fbcs; /*0x11 */
- u8 pddr_dma; /*0x12 */
- u8 rsvd4; /*0x13 */
- u8 pddr_fec0h; /*0x14 */
- u8 pddr_fec0l; /*0x15 */
- u8 pddr_fec1h; /*0x16 */
- u8 pddr_fec1l; /*0x17 */
- u8 pddr_feci2c; /*0x18 */
- u8 pddr_pcibg; /*0x19 */
- u8 pddr_pcibr; /*0x1A */
- u8 rsvd5; /*0x1B */
- u8 pddr_psc3psc2; /*0x1C */
- u8 pddr_psc1psc0; /*0x1D */
- u8 pddr_dspi; /*0x1E */
- u8 rsvd6; /*0x1F */
-
- /* Port Pin Data/Set Data Registers */
- u8 ppdsdr_fbctl; /*0x20 */
- u8 ppdsdr_fbcs; /*0x21 */
- u8 ppdsdr_dma; /*0x22 */
- u8 rsvd7; /*0x23 */
- u8 ppdsdr_fec0h; /*0x24 */
- u8 ppdsdr_fec0l; /*0x25 */
- u8 ppdsdr_fec1h; /*0x26 */
- u8 ppdsdr_fec1l; /*0x27 */
- u8 ppdsdr_feci2c; /*0x28 */
- u8 ppdsdr_pcibg; /*0x29 */
- u8 ppdsdr_pcibr; /*0x2A */
- u8 rsvd8; /*0x2B */
- u8 ppdsdr_psc3psc2; /*0x2C */
- u8 ppdsdr_psc1psc0; /*0x2D */
- u8 ppdsdr_dspi; /*0x2E */
- u8 rsvd9; /*0x2F */
-
- /* Port Clear Output Data Registers */
- u8 pclrr_fbctl; /*0x30 */
- u8 pclrr_fbcs; /*0x31 */
- u8 pclrr_dma; /*0x32 */
- u8 rsvd10; /*0x33 */
- u8 pclrr_fec0h; /*0x34 */
- u8 pclrr_fec0l; /*0x35 */
- u8 pclrr_fec1h; /*0x36 */
- u8 pclrr_fec1l; /*0x37 */
- u8 pclrr_feci2c; /*0x38 */
- u8 pclrr_pcibg; /*0x39 */
- u8 pclrr_pcibr; /*0x3A */
- u8 rsvd11; /*0x3B */
- u8 pclrr_psc3psc2; /*0x3C */
- u8 pclrr_psc1psc0; /*0x3D */
- u8 pclrr_dspi; /*0x3E */
- u8 rsvd12; /*0x3F */
-
- /* Pin Assignment Registers */
- u16 par_fbctl; /*0x40 */
- u8 par_fbcs; /*0x42 */
- u8 par_dma; /*0x43 */
- u16 par_feci2cirq; /*0x44 */
- u16 rsvd13; /*0x46 */
- u16 par_pcibg; /*0x48 */
- u16 par_pcibr; /*0x4A */
- u8 par_psc3; /*0x4C */
- u8 par_psc2; /*0x4D */
- u8 par_psc1; /*0x4E */
- u8 par_psc0; /*0x4F */
- u16 par_dspi; /*0x50 */
- u8 par_timer; /*0x52 */
- u8 rsvd14; /*0x53 */
-} gpio_t;
-
-typedef struct pci {
- u32 idr; /* 0x00 Device Id / Vendor Id */
- u32 scr; /* 0x04 Status / command */
- u32 ccrir; /* 0x08 Class Code / Revision Id */
- u32 cr1; /* 0x0c Configuration 1 */
- u32 bar0; /* 0x10 Base address register 0 */
- u32 bar1; /* 0x14 Base address register 1 */
- u32 bar2; /* 0x18 NA */
- u32 bar3; /* 0x1c NA */
- u32 bar4; /* 0x20 NA */
- u32 bar5; /* 0x24 NA */
- u32 ccpr; /* 0x28 Cardbus CIS Pointer */
- u32 sid; /* 0x2c Subsystem ID / Subsystem Vendor ID */
- u32 erbar; /* 0x30 Expansion ROM Base Address */
- u32 cpr; /* 0x34 Capabilities Pointer */
- u32 rsvd1; /* 0x38 */
- u32 cr2; /* 0x3c Configuration 2 */
- u32 rsvd2[8]; /* 0x40 - 0x5f */
-
- /* General control / status registers */
- u32 gscr; /* 0x60 Global Status / Control */
- u32 tbatr0a; /* 0x64 Target Base Adr Translation 0 */
- u32 tbatr1a; /* 0x68 Target Base Adr Translation 1 */
- u32 tcr1; /* 0x6c Target Control 1 Register */
- u32 iw0btar; /* 0x70 Initiator Win 0 Base/Translation adr */
- u32 iw1btar; /* 0x74 Initiator Win 1 Base/Translation adr */
- u32 iw2btar; /* 0x78 NA */
- u32 rsvd3; /* 0x7c */
- u32 iwcr; /* 0x80 Initiator Window Configuration */
- u32 icr; /* 0x84 Initiator Control */
- u32 isr; /* 0x88 Initiator Status */
- u32 tcr2; /* 0x8c NA */
- u32 tbatr0; /* 0x90 NA */
- u32 tbatr1; /* 0x94 NA */
- u32 tbatr2; /* 0x98 NA */
- u32 tbatr3; /* 0x9c NA */
- u32 tbatr4; /* 0xa0 NA */
- u32 tbatr5; /* 0xa4 NA */
- u32 intr; /* 0xa8 NA */
- u32 rsvd4[19]; /* 0xac - 0xf7 */
- u32 car; /* 0xf8 Configuration Address */
-} pci_t;
-
-typedef struct pci_arbiter {
- /* Pci Arbiter Registers */
- union {
- u32 acr; /* Arbiter Control */
- u32 asr; /* Arbiter Status */
- };
-} pciarb_t;
-#endif /* __IMMAP_547x_8x__ */
diff --git a/arch/m68k/include/asm/m547x_8x.h b/arch/m68k/include/asm/m547x_8x.h
deleted file mode 100644
index 30f12004b76b..000000000000
--- a/arch/m68k/include/asm/m547x_8x.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * mcf547x_8x.h -- Definitions for Freescale Coldfire 547x_8x
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#ifndef mcf547x_8x_h
-#define mcf547x_8x_h
-
-/*********************************************************************
-* XLB Arbiter (XLB)
-*********************************************************************/
-/* Bit definitions and macros for XARB_CFG */
-#define XARB_CFG_AT (0x00000002)
-#define XARB_CFG_DT (0x00000004)
-#define XARB_CFG_BA (0x00000008)
-#define XARB_CFG_PM(x) (((x)&0x00000003)<<5)
-#define XARB_CFG_SP(x) (((x)&0x00000007)<<8)
-#define XARB_CFG_PLDIS (0x80000000)
-
-/* Bit definitions and macros for XARB_SR */
-#define XARB_SR_AT (0x00000001)
-#define XARB_SR_DT (0x00000002)
-#define XARB_SR_BA (0x00000004)
-#define XARB_SR_TTM (0x00000008)
-#define XARB_SR_ECW (0x00000010)
-#define XARB_SR_TTR (0x00000020)
-#define XARB_SR_TTA (0x00000040)
-#define XARB_SR_MM (0x00000080)
-#define XARB_SR_SEA (0x00000100)
-
-/* Bit definitions and macros for XARB_IMR */
-#define XARB_IMR_ATE (0x00000001)
-#define XARB_IMR_DTE (0x00000002)
-#define XARB_IMR_BAE (0x00000004)
-#define XARB_IMR_TTME (0x00000008)
-#define XARB_IMR_ECWE (0x00000010)
-#define XARB_IMR_TTRE (0x00000020)
-#define XARB_IMR_TTAE (0x00000040)
-#define XARB_IMR_MME (0x00000080)
-#define XARB_IMR_SEAE (0x00000100)
-
-/* Bit definitions and macros for XARB_SIGCAP */
-#define XARB_SIGCAP_TT(x) ((x)&0x0000001F)
-#define XARB_SIGCAP_TBST (0x00000020)
-#define XARB_SIGCAP_TSIZ(x) (((x)&0x00000007)<<7)
-
-/* Bit definitions and macros for XARB_PRIEN */
-#define XARB_PRIEN_M0 (0x00000001)
-#define XARB_PRIEN_M2 (0x00000004)
-#define XARB_PRIEN_M3 (0x00000008)
-
-/* Bit definitions and macros for XARB_PRI */
-#define XARB_PRI_M0P(x) (((x)&0x00000007)<<0)
-#define XARB_PRI_M2P(x) (((x)&0x00000007)<<8)
-#define XARB_PRI_M3P(x) (((x)&0x00000007)<<12)
-
-/*********************************************************************
-* General Purpose I/O (GPIO)
-*********************************************************************/
-/* Bit definitions and macros for GPIO_PAR_FBCTL */
-#define GPIO_PAR_FBCTL_TS(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_FBCTL_TA (0x0004)
-#define GPIO_PAR_FBCTL_RWB(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_FBCTL_OE (0x0040)
-#define GPIO_PAR_FBCTL_BWE0 (0x0100)
-#define GPIO_PAR_FBCTL_BWE1 (0x0400)
-#define GPIO_PAR_FBCTL_BWE2 (0x1000)
-#define GPIO_PAR_FBCTL_BWE3 (0x4000)
-#define GPIO_PAR_FBCTL_TS_GPIO (0)
-#define GPIO_PAR_FBCTL_TS_TBST (2)
-#define GPIO_PAR_FBCTL_TS_TS (3)
-#define GPIO_PAR_FBCTL_RWB_GPIO (0x0000)
-#define GPIO_PAR_FBCTL_RWB_TBST (0x0020)
-#define GPIO_PAR_FBCTL_RWB_RWB (0x0030)
-
-/* Bit definitions and macros for GPIO_PAR_FBCS */
-#define GPIO_PAR_FBCS_CS1 (0x02)
-#define GPIO_PAR_FBCS_CS2 (0x04)
-#define GPIO_PAR_FBCS_CS3 (0x08)
-#define GPIO_PAR_FBCS_CS4 (0x10)
-#define GPIO_PAR_FBCS_CS5 (0x20)
-
-/* Bit definitions and macros for GPIO_PAR_DMA */
-#define GPIO_PAR_DMA_DREQ0(x) (((x)&0x03)<<0)
-#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<2)
-#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<4)
-#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6)
-#define GPIO_PAR_DMA_DACKx_GPIO (0)
-#define GPIO_PAR_DMA_DACKx_TOUT (2)
-#define GPIO_PAR_DMA_DACKx_DACK (3)
-#define GPIO_PAR_DMA_DREQx_GPIO (0)
-#define GPIO_PAR_DMA_DREQx_TIN (2)
-#define GPIO_PAR_DMA_DREQx_DREQ (3)
-
-/* Bit definitions and macros for GPIO_PAR_FECI2CIRQ */
-#define GPIO_PAR_FECI2CIRQ_IRQ5 (0x0001)
-#define GPIO_PAR_FECI2CIRQ_IRQ6 (0x0002)
-#define GPIO_PAR_FECI2CIRQ_SCL (0x0004)
-#define GPIO_PAR_FECI2CIRQ_SDA (0x0008)
-#define GPIO_PAR_FECI2CIRQ_E1MDC(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO(x) (((x)&0x0003)<<8)
-#define GPIO_PAR_FECI2CIRQ_E1MII (0x0400)
-#define GPIO_PAR_FECI2CIRQ_E17 (0x0800)
-#define GPIO_PAR_FECI2CIRQ_E0MDC (0x1000)
-#define GPIO_PAR_FECI2CIRQ_E0MDIO (0x2000)
-#define GPIO_PAR_FECI2CIRQ_E0MII (0x4000)
-#define GPIO_PAR_FECI2CIRQ_E07 (0x8000)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO_CANRX (0x0000)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO_SDA (0x0200)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO_EMDIO (0x0300)
-#define GPIO_PAR_FECI2CIRQ_E1MDC_CANTX (0x0000)
-#define GPIO_PAR_FECI2CIRQ_E1MDC_SCL (0x0080)
-#define GPIO_PAR_FECI2CIRQ_E1MDC_EMDC (0x00C0)
-
-/* Bit definitions and macros for GPIO_PAR_PCIBG */
-#define GPIO_PAR_PCIBG_PCIBG0(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_PCIBG_PCIBG1(x) (((x)&0x0003)<<2)
-#define GPIO_PAR_PCIBG_PCIBG2(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_PCIBG_PCIBG3(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_PCIBG_PCIBG4(x) (((x)&0x0003)<<8)
-
-/* Bit definitions and macros for GPIO_PAR_PCIBR */
-#define GPIO_PAR_PCIBR_PCIBR0(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_PCIBR_PCIBR1(x) (((x)&0x0003)<<2)
-#define GPIO_PAR_PCIBR_PCIBR2(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_PCIBR_PCIBR3(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_PCIBR_PCIBR4(x) (((x)&0x0003)<<8)
-
-/* Bit definitions and macros for GPIO_PAR_PSC3 */
-#define GPIO_PAR_PSC3_TXD3 (0x04)
-#define GPIO_PAR_PSC3_RXD3 (0x08)
-#define GPIO_PAR_PSC3_RTS3(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC3_CTS3(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC3_CTS3_GPIO (0x00)
-#define GPIO_PAR_PSC3_CTS3_BCLK (0x80)
-#define GPIO_PAR_PSC3_CTS3_CTS (0xC0)
-#define GPIO_PAR_PSC3_RTS3_GPIO (0x00)
-#define GPIO_PAR_PSC3_RTS3_FSYNC (0x20)
-#define GPIO_PAR_PSC3_RTS3_RTS (0x30)
-#define GPIO_PAR_PSC3_CTS2_CANRX (0x40)
-
-/* Bit definitions and macros for GPIO_PAR_PSC2 */
-#define GPIO_PAR_PSC2_TXD2 (0x04)
-#define GPIO_PAR_PSC2_RXD2 (0x08)
-#define GPIO_PAR_PSC2_RTS2(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC2_CTS2(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC2_CTS2_GPIO (0x00)
-#define GPIO_PAR_PSC2_CTS2_BCLK (0x80)
-#define GPIO_PAR_PSC2_CTS2_CTS (0xC0)
-#define GPIO_PAR_PSC2_RTS2_GPIO (0x00)
-#define GPIO_PAR_PSC2_RTS2_CANTX (0x10)
-#define GPIO_PAR_PSC2_RTS2_FSYNC (0x20)
-#define GPIO_PAR_PSC2_RTS2_RTS (0x30)
-
-/* Bit definitions and macros for GPIO_PAR_PSC1 */
-#define GPIO_PAR_PSC1_TXD1 (0x04)
-#define GPIO_PAR_PSC1_RXD1 (0x08)
-#define GPIO_PAR_PSC1_RTS1(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC1_CTS1(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC1_CTS1_GPIO (0x00)
-#define GPIO_PAR_PSC1_CTS1_BCLK (0x80)
-#define GPIO_PAR_PSC1_CTS1_CTS (0xC0)
-#define GPIO_PAR_PSC1_RTS1_GPIO (0x00)
-#define GPIO_PAR_PSC1_RTS1_FSYNC (0x20)
-#define GPIO_PAR_PSC1_RTS1_RTS (0x30)
-
-/* Bit definitions and macros for GPIO_PAR_PSC0 */
-#define GPIO_PAR_PSC0_TXD0 (0x04)
-#define GPIO_PAR_PSC0_RXD0 (0x08)
-#define GPIO_PAR_PSC0_RTS0(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC0_CTS0(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC0_CTS0_GPIO (0x00)
-#define GPIO_PAR_PSC0_CTS0_BCLK (0x80)
-#define GPIO_PAR_PSC0_CTS0_CTS (0xC0)
-#define GPIO_PAR_PSC0_RTS0_GPIO (0x00)
-#define GPIO_PAR_PSC0_RTS0_FSYNC (0x20)
-#define GPIO_PAR_PSC0_RTS0_RTS (0x30)
-
-/* Bit definitions and macros for GPIO_PAR_DSPI */
-#define GPIO_PAR_DSPI_SOUT(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_DSPI_SIN(x) (((x)&0x0003)<<2)
-#define GPIO_PAR_DSPI_SCK(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_DSPI_CS0(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_DSPI_CS2(x) (((x)&0x0003)<<8)
-#define GPIO_PAR_DSPI_CS3(x) (((x)&0x0003)<<10)
-#define GPIO_PAR_DSPI_CS5 (0x1000)
-#define GPIO_PAR_DSPI_CS3_GPIO (0x0000)
-#define GPIO_PAR_DSPI_CS3_CANTX (0x0400)
-#define GPIO_PAR_DSPI_CS3_TOUT (0x0800)
-#define GPIO_PAR_DSPI_CS3_DSPICS (0x0C00)
-#define GPIO_PAR_DSPI_CS2_GPIO (0x0000)
-#define GPIO_PAR_DSPI_CS2_CANTX (0x0100)
-#define GPIO_PAR_DSPI_CS2_TOUT (0x0200)
-#define GPIO_PAR_DSPI_CS2_DSPICS (0x0300)
-#define GPIO_PAR_DSPI_CS0_GPIO (0x0000)
-#define GPIO_PAR_DSPI_CS0_FSYNC (0x0040)
-#define GPIO_PAR_DSPI_CS0_RTS (0x0080)
-#define GPIO_PAR_DSPI_CS0_DSPICS (0x00C0)
-#define GPIO_PAR_DSPI_SCK_GPIO (0x0000)
-#define GPIO_PAR_DSPI_SCK_BCLK (0x0010)
-#define GPIO_PAR_DSPI_SCK_CTS (0x0020)
-#define GPIO_PAR_DSPI_SCK_SCK (0x0030)
-#define GPIO_PAR_DSPI_SIN_GPIO (0x0000)
-#define GPIO_PAR_DSPI_SIN_RXD (0x0008)
-#define GPIO_PAR_DSPI_SIN_SIN (0x000C)
-#define GPIO_PAR_DSPI_SOUT_GPIO (0x0000)
-#define GPIO_PAR_DSPI_SOUT_TXD (0x0002)
-#define GPIO_PAR_DSPI_SOUT_SOUT (0x0003)
-
-/* Bit definitions and macros for GPIO_PAR_TIMER */
-#define GPIO_PAR_TIMER_TOUT2 (0x01)
-#define GPIO_PAR_TIMER_TIN2(x) (((x)&0x03)<<1)
-#define GPIO_PAR_TIMER_TOUT3 (0x08)
-#define GPIO_PAR_TIMER_TIN3(x) (((x)&0x03)<<4)
-#define GPIO_PAR_TIMER_TIN3_CANRX (0x00)
-#define GPIO_PAR_TIMER_TIN3_IRQ (0x20)
-#define GPIO_PAR_TIMER_TIN3_TIN (0x30)
-#define GPIO_PAR_TIMER_TIN2_CANRX (0x00)
-#define GPIO_PAR_TIMER_TIN2_IRQ (0x04)
-#define GPIO_PAR_TIMER_TIN2_TIN (0x06)
-
-/*********************************************************************
-* Slice Timer (SLT)
-*********************************************************************/
-#define SLT_CR_RUN (0x04000000)
-#define SLT_CR_IEN (0x02000000)
-#define SLT_CR_TEN (0x01000000)
-
-#define SLT_SR_BE (0x02000000)
-#define SLT_SR_ST (0x01000000)
-
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
-#define INT0_LO_RSVD0 (0)
-#define INT0_LO_EPORT1 (1)
-#define INT0_LO_EPORT2 (2)
-#define INT0_LO_EPORT3 (3)
-#define INT0_LO_EPORT4 (4)
-#define INT0_LO_EPORT5 (5)
-#define INT0_LO_EPORT6 (6)
-#define INT0_LO_EPORT7 (7)
-#define INT0_LO_EP0ISR (15)
-#define INT0_LO_EP1ISR (16)
-#define INT0_LO_EP2ISR (17)
-#define INT0_LO_EP3ISR (18)
-#define INT0_LO_EP4ISR (19)
-#define INT0_LO_EP5ISR (20)
-#define INT0_LO_EP6ISR (21)
-#define INT0_LO_USBISR (22)
-#define INT0_LO_USBAISR (23)
-#define INT0_LO_USB (24)
-#define INT1_LO_DSPI_RFOF_TFUF (25)
-#define INT1_LO_DSPI_RFOF (26)
-#define INT1_LO_DSPI_RFDF (27)
-#define INT1_LO_DSPI_TFUF (28)
-#define INT1_LO_DSPI_TCF (29)
-#define INT1_LO_DSPI_TFFF (30)
-#define INT1_LO_DSPI_EOQF (31)
-
-#define INT0_HI_UART3 (32)
-#define INT0_HI_UART2 (33)
-#define INT0_HI_UART1 (34)
-#define INT0_HI_UART0 (35)
-#define INT0_HI_COMMTIM_TC (36)
-#define INT0_HI_SEC (37)
-#define INT0_HI_FEC1 (38)
-#define INT0_HI_FEC0 (39)
-#define INT0_HI_I2C (40)
-#define INT0_HI_PCIARB (41)
-#define INT0_HI_CBPCI (42)
-#define INT0_HI_XLBPCI (43)
-#define INT0_HI_XLBARB (47)
-#define INT0_HI_DMA (48)
-#define INT0_HI_CAN0_ERROR (49)
-#define INT0_HI_CAN0_BUSOFF (50)
-#define INT0_HI_CAN0_MBOR (51)
-#define INT0_HI_SLT1 (53)
-#define INT0_HI_SLT0 (54)
-#define INT0_HI_CAN1_ERROR (55)
-#define INT0_HI_CAN1_BUSOFF (56)
-#define INT0_HI_CAN1_MBOR (57)
-#define INT0_HI_GPT3 (59)
-#define INT0_HI_GPT2 (60)
-#define INT0_HI_GPT1 (61)
-#define INT0_HI_GPT0 (62)
-
-/*********************************************************************
-* General Purpose Timers (GPTMR)
-*********************************************************************/
-/* Enable and Mode Select */
-#define GPT_OCT(x) (x & 0x3)<<4 /* Output Compare Type */
-#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */
-#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */
-#define GPT_CTRL_CE 0x10 /* Counter Enable */
-#define GPT_CTRL_STPCNT 0x04 /* Stop continous */
-#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */
-#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */
-#define GPT_MODE_GPIO(x) (x & 0x3)<<4 /* Gpio Mode Type */
-#define GPT_TMS_ICT 0x01 /* Input Capture Enable */
-#define GPT_TMS_OCT 0x02 /* Output Capture Enable */
-#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */
-#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */
-
-#define GPT_PWM_WIDTH(x) (x & 0xffff)
-
-/* Status */
-#define GPT_STA_CAPTURE(x) (x & 0xffff)
-
-#define GPT_OVFPIN_OVF(x) (x & 0x70)
-#define GPT_OVFPIN_PIN 0x01
-
-#define GPT_INT_TEXP 0x08
-#define GPT_INT_PWMP 0x04
-#define GPT_INT_COMP 0x02
-#define GPT_INT_CAPT 0x01
-
-/*********************************************************************
-* PCI
-*********************************************************************/
-
-/* Bit definitions and macros for SCR */
-#define PCI_SCR_PE (0x80000000) /* Parity Error detected */
-#define PCI_SCR_SE (0x40000000) /* System error signalled */
-#define PCI_SCR_MA (0x20000000) /* Master aboart received */
-#define PCI_SCR_TR (0x10000000) /* Target abort received */
-#define PCI_SCR_TS (0x08000000) /* Target abort signalled */
-#define PCI_SCR_DT (0x06000000) /* PCI_DEVSEL timing */
-#define PCI_SCR_DP (0x01000000) /* Master data parity err */
-#define PCI_SCR_FC (0x00800000) /* Fast back-to-back */
-#define PCI_SCR_R (0x00400000) /* Reserved */
-#define PCI_SCR_66M (0x00200000) /* 66Mhz */
-#define PCI_SCR_C (0x00100000) /* Capabilities list */
-#define PCI_SCR_F (0x00000200) /* Fast back-to-back enable */
-#define PCI_SCR_S (0x00000100) /* SERR enable */
-#define PCI_SCR_ST (0x00000080) /* Addr and Data stepping */
-#define PCI_SCR_PER (0x00000040) /* Parity error response */
-#define PCI_SCR_V (0x00000020) /* VGA palette snoop enable */
-#define PCI_SCR_MW (0x00000010) /* Memory write and invalidate enable */
-#define PCI_SCR_SP (0x00000008) /* Special cycle monitor or ignore */
-#define PCI_SCR_B (0x00000004) /* Bus master enable */
-#define PCI_SCR_M (0x00000002) /* Memory access control */
-#define PCI_SCR_IO (0x00000001) /* I/O access control */
-
-#define PCI_CR1_BIST(x) ((x & 0xFF) << 24) /* Built in self test */
-#define PCI_CR1_HDR(x) ((x & 0xFF) << 16) /* Header type */
-#define PCI_CR1_LTMR(x) ((x & 0xF8) << 8) /* Latency timer */
-#define PCI_CR1_CLS(x) (x & 0x0F) /* Cache line size */
-
-#define PCI_BAR_BAR0(x) (x & 0xFFFC0000)
-#define PCI_BAR_BAR1(x) (x & 0xC0000000)
-#define PCI_BAR_PREF (0x00000004) /* Prefetchable access */
-#define PCI_BAR_RANGE (0x00000002) /* Fixed to 00 */
-#define PCI_BAR_IO_M (0x00000001) /* IO / memory space */
-
-#define PCI_CR2_MAXLAT(x) ((x & 0xFF) << 24) /* Maximum latency */
-#define PCI_CR2_MINGNT(x) ((x & 0xFF) << 16) /* Minimum grant */
-#define PCI_CR2_INTPIN(x) ((x & 0xFF) << 8) /* Interrupt Pin */
-#define PCI_CR2_INTLIN(x) (x & 0xFF) /* Interrupt Line */
-
-#define PCI_GSCR_DRD (0x80000000) /* Delayed read discarded */
-#define PCI_GSCR_PE (0x20000000) /* PCI_PERR detected */
-#define PCI_GSCR_SE (0x10000000) /* SERR detected */
-#define PCI_GSCR_ER (0x08000000) /* Error response detected */
-#define PCI_GSCR_DRDE (0x00008000) /* Delayed read discarded enable */
-#define PCI_GSCR_PEE (0x00002000) /* PERR detected interrupt enable */
-#define PCI_GSCR_SEE (0x00001000) /* SERR detected interrupt enable */
-#define PCI_GSCR_PR (0x00000001) /* PCI reset */
-
-#define PCI_TCR1_LD (0x01000000) /* Latency rule disable */
-#define PCI_TCR1_PID (0x00020000) /* Prefetch invalidate and disable */
-#define PCI_TCR1_P (0x00010000) /* Prefetch reads */
-#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */
-
-#define PCI_TCR1_B5E (0x00002000) /* */
-#define PCI_TCR1_B4E (0x00001000) /* */
-#define PCI_TCR1_B3E (0x00000800) /* */
-#define PCI_TCR1_B2E (0x00000400) /* */
-#define PCI_TCR1_B1E (0x00000200) /* */
-#define PCI_TCR1_B0E (0x00000100) /* */
-#define PCI_TCR1_CR (0x00000001) /* */
-
-#define PCI_TBATR_BAT0(x) (x & 0xFFFC0000)
-#define PCI_TBATR_BAT1(x) (x & 0xC0000000)
-#define PCI_TBATR_EN (0x00000001) /* Enable */
-
-#define PCI_IWCR_W0C_IO (0x08000000) /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W0C_PRC_RDMUL (0x04000000) /* PCI Memory Read multiple */
-#define PCI_IWCR_W0C_PRC_RDLN (0x02000000) /* PCI Memory Read line */
-#define PCI_IWCR_W0C_PRC_RD (0x00000000) /* PCI Memory Read */
-#define PCI_IWCR_W0C_EN (0x01000000) /* Enable - Register initialize */
-#define PCI_IWCR_W1C_IO (0x00080000) /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W1C_PRC_RDMUL (0x00040000) /* PCI Memory Read multiple */
-#define PCI_IWCR_W1C_PRC_RDLN (0x00020000) /* PCI Memory Read line */
-#define PCI_IWCR_W1C_PRC_RD (0x00000000) /* PCI Memory Read */
-#define PCI_IWCR_W1C_EN (0x00010000) /* Enable - Register initialize */
-#define PCI_IWCR_W2C_IO (0x00000800) /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W2C_PRC_RDMUL (0x00000400) /* PCI Memory Read multiple */
-#define PCI_IWCR_W2C_PRC_RDLN (0x00000200) /* PCI Memory Read line */
-#define PCI_IWCR_W2C_PRC_RD (0x00000000) /* PCI Memory Read */
-#define PCI_IWCR_W2C_EN (0x00000100) /* Enable - Register initialize */
-
-#define PCI_ICR_REE (0x04000000) /* Retry error enable */
-#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */
-#define PCI_ICR_TAE (0x01000000) /* Target abort enable */
-#define PCI_ICR_MAXRETRY(x) ((x) & 0x000000FF)
-
-#define PCIARB_ACR_DS (0x80000000)
-#define PCIARB_ARC_EXTMINTEN(x) (((x)&0x1F) << 17)
-#define PCIARB_ARC_INTMINTEN (0x00010000)
-#define PCIARB_ARC_EXTMPRI(x) (((x)&0x1F) << 1)
-#define PCIARB_ARC_INTMPRI (0x00000001)
-
-#endif /* mcf547x_8x_h */
diff --git a/arch/m68k/lib/cache.c b/arch/m68k/lib/cache.c
index 68f2eef584b7..aa2b93e0e0fb 100644
--- a/arch/m68k/lib/cache.c
+++ b/arch/m68k/lib/cache.c
@@ -80,7 +80,7 @@ void icache_invalid(void)
}
/*
- * data cache only for ColdFire V4 such as MCF547x_8x, MCF5445x
+ * data cache only for ColdFire V4 such as MCF5445x
* the dcache will be dummy in ColdFire V2 and V3
*/
void dcache_enable(void)
diff --git a/board/freescale/m547xevb/Kconfig b/board/freescale/m547xevb/Kconfig
deleted file mode 100644
index 8cfe20ab8dd4..000000000000
--- a/board/freescale/m547xevb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M5475EVB
-
-config SYS_CPU
- default "mcf547x_8x"
-
-config SYS_BOARD
- default "m547xevb"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "M5475EVB"
-
-endif
diff --git a/board/freescale/m547xevb/MAINTAINERS b/board/freescale/m547xevb/MAINTAINERS
deleted file mode 100644
index 0d821eb011f1..000000000000
--- a/board/freescale/m547xevb/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-M547XEVB BOARD
-M: TsiChung Liew <Tsi-Chung.Liew at nxp.com>
-S: Maintained
-F: board/freescale/m547xevb/
-F: include/configs/M5475EVB.h
-F: configs/M5475AFE_defconfig
-F: configs/M5475BFE_defconfig
-F: configs/M5475CFE_defconfig
-F: configs/M5475DFE_defconfig
-F: configs/M5475EFE_defconfig
-F: configs/M5475FFE_defconfig
-F: configs/M5475GFE_defconfig
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
deleted file mode 100644
index 29fe9dad775f..000000000000
--- a/board/freescale/m547xevb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y = m547xevb.o
diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README
deleted file mode 100644
index 6b4fbe5c25d3..000000000000
--- a/board/freescale/m547xevb/README
+++ /dev/null
@@ -1,271 +0,0 @@
-Freescale MCF5475EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew at freescale.com)
-Created Jan 08, 2008
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m547xevb/m547xevb.c Dram setup, IDE pre init, and PCI init
-- board/freescale/m547xevb/mii.c MII init
-- board/freescale/m547xevb/Makefile Makefile
-- board/freescale/m547xevb/config.mk config make
-- board/freescale/m547xevb/u-boot.lds Linker description
-
-- arch/m68k/cpu/mcf547x_8x/cpu.c cpu specific code
-- arch/m68k/cpu/mcf547x_8x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- arch/m68k/cpu/mcf547x_8x/interrupts.c cpu specific interrupt support
-- arch/m68k/cpu/mcf547x_8x/slicetimer.c Timer support
-- arch/m68k/cpu/mcf547x_8x/speed.c system, pci, flexbus, and cpu clock
-- arch/m68k/cpu/mcf547x_8x/Makefile Makefile
-- arch/m68k/cpu/mcf547x_8x/config.mk config make
-- arch/m68k/cpu/mcf547x_8x/start.S start up assembly code
-
-- board/freescale/m547xevb/README This readme file
-
-- drivers/dma/MCD_dmaApi.c DMA API functions
-- drivers/dma/MCD_tasks.c DMA Tasks
-- drivers/dma/MCD_tasksInit.c DMA Tasks Init
-- drivers/net/fsl_mcdmafec.c ColdFire common DMA FEC driver
-- drivers/serial/mcfuart.c ColdFire common UART driver
-
-- include/MCD_dma.h DMA header file
-- include/MCD_progCheck.h DMA header file
-- include/MCD_tasksInit.h DMA header file
-- include/asm-m68k/bitops.h Bit operation function export
-- include/asm-m68k/byteorder.h Byte order functions
-- include/asm-m68k/errno.h Error Number definition
-- include/asm-m68k/fec.h FEC structure and definition
-- include/asm-m68k/fsl_i2c.h I2C structure and definition
-- include/asm-m68k/fsl_mcddmafec.h DMA FEC structure and definition
-- include/asm-m68k/global_data.h Global data structure
-- include/asm-m68k/immap.h ColdFire specific header file and driver macros
-- include/asm-m68k/immap_547x_8x.h mcf547x_8x specific header file
-- include/asm-m68k/io.h io functions
-- include/asm-m68k/m547x_8x.h mcf547x_8x specific header file
-- include/asm-m68k/posix_types.h Posix
-- include/asm-m68k/processor.h header file
-- include/asm-m68k/ptrace.h Exception structure
-- include/asm-m68k/rtc.h Realtime clock header file
-- include/asm-m68k/string.h String function export
-- include/asm-m68k/timer.h Timer structure and definition
-- include/asm-m68k/types.h Data types definition
-- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h U-Boot structure
-
-- include/configs/M5475EVB.h Board specific configuration file
-
-- arch/m68k/lib/board.c board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/traps.c Exception init code
-
-1 MCF547x specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in thie coldfire family
-
-1.2 Configuration settings for M5475EVB Development Board
-CONFIG_MCF547x_8x -- define for all MCF547x_8x CPUs
-CONFIG_M547x -- define for all Freescale MCF547x CPUs
-CONFIG_M5475 -- define for M5475EVB board
-
-CONFIG_MCFUART -- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE -- define UART baudrate
-
-CONFIG_FSLDMAFEC -- define to use common dma FEC driver
-CONFIG_MII -- enable to use MII driver
-CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
-CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
-CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
-CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
-CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
-CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
-CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
-MCFFEC_TOUT_LOOP -- set FEC timeout loop
-CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot
-
-CONFIG_CMD_USB -- enable USB commands
-CONFIG_USB_OHCI_NEW -- enable USB OHCI driver
-CONFIG_USB_STORAGE -- enable USB Storage device
-CONFIG_DOS_PARTITION -- enable DOS read/write
-
-CONFIG_SLTTMR -- define to use SLT timer
-
-CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
-CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED -- define for I2C speed
-CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
-CONFIG_SYS_IMMR -- define for MBAR offset
-
-CONFIG_PCI -- define for PCI support
-CONFIG_PCI_PNP -- define for Plug n play support
-CONFIG_SKIPPCI_HOSTBRIDGE -- SKIP PCI Host bridge
-CONFIG_SYS_PCI_MEM_BUS -- PCI memory logical offset
-CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset
-CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size
-CONFIG_SYS_PCI_IO_BUS -- PCI IO logical offset
-CONFIG_SYS_PCI_IO_PHYS -- PCI IO physical offset
-CONFIG_SYS_PCI_IO_SIZE -- PCI IO size
-CONFIG_SYS_PCI_CFG_BUS -- PCI Configuration logical offset
-CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset
-CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size
-
-CONFIG_SYS_MBAR -- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF547x internal SRAM
-
-CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
- Flash: 0xFF800000-0xFFFFFFFF (8MB)
- DDR: 0x00000000-0x3FFFFFFF (1024MB)
- SRAM: 0xF2000000-0xF2000FFF (4KB)
- PCI: 0x70000000-0x8FFFFFFF (512MB)
- IP: 0xF0000000-0xFFFFFFFF (256MB)
-
-3. COMPILATION
-==============
-3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
- version) from codesourcery.com was used. Download it from:
- http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
- export CROSS_COMPILE=cross-compile-prefix
- cd u-boot-1.x.x
- make distclean
- make M5475AFE_config, or - boot 2MB, RAM 64MB
- make M5475BFE_config, or - boot 2MB, code 16MB, RAM 64MB
- make M5475CFE_config, or - boot 2MB, code 16MB, Video, USB, RAM 64MB
- make M5475DFE_config, or - boot 2MB, USB, RAM 64MB
- make M5475EFE_config, or - boot 2MB, Video, USB, RAM 64MB
- make M5475FFE_config, or - boot 2MB, code 32MB, Video, USB, RAM 128MB
- make M5475GFE_config, or - boot 2MB, RAM 64MB
- make
-
-5. SCREEN DUMP
-==============
-5.1
-
-U-Boot 1.3.1 (Jan 8 2008 - 12:47:44)
-
-CPU: Freescale MCF5475
- CPU CLK 266 Mhz BUS CLK 133 Mhz
-Board: Freescale FireEngine 5475 EVB
-I2C: ready
-DRAM: 64 MB
-FLASH: 18 MB
-In: serial
-Out: serial
-Err: serial
-Net: FEC0, FEC1
--> pri
-bootdelay=1
-baudrate=115200
-ethaddr=00:e0:0c:bc:e5:60
-eth1addr=00:e0:0c:bc:e5:61
-ipaddr=192.162.1.2
-serverip=192.162.1.1
-gatewayip=192.162.1.1
-netmask=255.255.255.0
-hostname=M547xEVB
-netdev=eth0
-loadaddr=10000
-u-boot=u-boot.bin
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
-stdin=serial
-stdout=serial
-stderr=serial
-ethact=FEC0
-mem=65024k
-
-Environment size: 433/8188 bytes
--> bdin
-memstart = 0x00000000
-memsize = 0x04000000
-flashstart = 0xFF800000
-flashsize = 0x01200000
-flashoffset = 0x00000000
-sramstart = 0xF2000000
-sramsize = 0x00001000
-mbar = 0xF0000000
-busfreq = 133.333 MHz
-pcifreq = 0 MHz
-ethaddr = 00:E0:0C:BC:E5:60
-eth1addr = 00:E0:0C:BC:E5:61
-ip_addr = 192.162.1.2
-baudrate = 115200 bps
--> ?
-? - alias for 'help'
-base - print or set address offset
-bdinfo - print Board Info structure
-boot - boot default, i.e., run 'bootcmd'
-bootd - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm - boot application image from memory
-bootp - boot image via network using BootP/TFTP protocol
-bootvx - Boot vxWorks from an ELF image
-cmp - memory compare
-coninfo - print console devices and information
-cp - memory copy
-crc32 - checksum calculation
-dcache - enable or disable data cache
-echo - echo args to console
-erase - erase FLASH memory
-flinfo - print FLASH memory information
-go - start application at address 'addr'
-help - print online help
-i2c - I2C sub-system
-icache - enable or disable instruction cache
-iminfo - print header information for application image
-imls - list all images found in flash
-itest - return true/false on integer compare
-loadb - load binary file over serial line (kermit mode)
-loads - load S-Record file over serial line
-loady - load binary file over serial line (ymodem mode)
-loop - infinite loop on address range
-md - memory display
-mii - MII utility commands
-mm - memory modify (auto-incrementing)
-mtest - simple RAM test
-mw - memory write (fill)
-nfs - boot image via network using NFS protocol
-nm - memory modify (constant address)
-pci - list and access PCI Configuration Space
-ping - send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-rarpboot- boot image via network using RARP/TFTP protocol
-reset - Perform RESET of the CPU
-run - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv - set environment variables
-sleep - delay execution for some time
-source - run script from memory
-tftpboot- boot image via network using TFTP protocol
-usb - USB sub-system
-usbboot - boot from USB device
-version - print monitor version
--> usb start
-(Re)start USB...
-USB: OHCI pci controller (1131, 1561) found @(0:17:0)
-OHCI regs address 0x80000000
-scanning bus for devices... 2 USB Device(s) found
- scanning bus for storage devices... 1 Storage Device(s) found
-->
diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c
deleted file mode 100644
index 1568f455e927..000000000000
--- a/board/freescale/m547xevb/m547xevb.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <config.h>
-#include <common.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- puts("Board: ");
- puts("Freescale FireEngine 5475 EVB\n");
- return 0;
-};
-
-int dram_init(void)
-{
- siu_t *siu = (siu_t *) (MMAP_SIU);
- sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
- u32 dramsize, i;
-#ifdef CONFIG_SYS_DRAMSZ1
- u32 temp;
-#endif
-
- out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH);
-
- dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
- for (i = 0x13; i < 0x20; i++) {
- if (dramsize == (1 << i))
- break;
- }
- i--;
- out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i);
-
-#ifdef CONFIG_SYS_DRAMSZ1
- temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
- for (i = 0x13; i < 0x20; i++) {
- if (temp == (1 << i))
- break;
- }
- i--;
- dramsize += temp;
- out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i);
-#endif
-
- out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
- out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
-
- /* Issue PALL */
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
-
- /* Issue LEMR */
- out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
- out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
-
- udelay(500);
-
- /* Issue PALL */
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
-
- /* Perform two refresh cycles */
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
-
- out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
-
- out_be32(&sdram->ctrl,
- (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
-
- udelay(100);
-
- gd->ram_size = dramsize;
-
- return 0;
-};
-
-int testdram(void)
-{
- /* TODO: XXX XXX XXX */
- printf("DRAM test not implemented!\n");
-
- return (0);
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI devices, report devices found.
- */
-static struct pci_controller hose;
-extern void pci_mcf547x_8x_init(struct pci_controller *hose);
-
-void pci_init_board(void)
-{
- pci_mcf547x_8x_init(&hose);
-}
-#endif /* CONFIG_PCI */
diff --git a/configs/M5475AFE_defconfig b/configs/M5475AFE_defconfig
deleted file mode 100644
index a919bf720bba..000000000000
--- a/configs/M5475AFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475AFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475BFE_defconfig b/configs/M5475BFE_defconfig
deleted file mode 100644
index b9f4904134a4..000000000000
--- a/configs/M5475BFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475BFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475CFE_defconfig b/configs/M5475CFE_defconfig
deleted file mode 100644
index ae5853572633..000000000000
--- a/configs/M5475CFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475CFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475DFE_defconfig b/configs/M5475DFE_defconfig
deleted file mode 100644
index a9d085f3707a..000000000000
--- a/configs/M5475DFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475DFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475EFE_defconfig b/configs/M5475EFE_defconfig
deleted file mode 100644
index 38d31ace0120..000000000000
--- a/configs/M5475EFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475EFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475FFE_defconfig b/configs/M5475FFE_defconfig
deleted file mode 100644
index 0a620c39f1a1..000000000000
--- a/configs/M5475FFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475FFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475GFE_defconfig b/configs/M5475GFE_defconfig
deleted file mode 100644
index 05b0ba7af8cd..000000000000
--- a/configs/M5475GFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475GFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst
index 44e1a5dfa384..698e288c4487 100644
--- a/doc/arch/m68k.rst
+++ b/doc/arch/m68k.rst
@@ -72,7 +72,7 @@ A bash script similar to the one below may be used:
export CROSS_COMPILE=/opt/toolchains/m68k/gcc-4.9.0-nolibc/bin/m68k-linux-
- board=M5475DFE
+ board=M5249EVB
make distclean
make ${board}_defconfig
diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c
index 0987266c96ef..ca06b35316d3 100644
--- a/drivers/net/mcfmii.c
+++ b/drivers/net/mcfmii.c
@@ -11,11 +11,7 @@
#include <asm/global_data.h>
#include <linux/delay.h>
-#ifdef CONFIG_MCF547x_8x
-#include <asm/fsl_mcdmafec.h>
-#else
#include <asm/fec.h>
-#endif
#include <asm/immap.h>
#include <linux/mii.h>
diff --git a/env/Kconfig b/env/Kconfig
index 1411f9e815ec..ea0ee1e8bafa 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -82,7 +82,7 @@ config ENV_IS_IN_FLASH
depends on !CHAIN_OF_TRUST
default y if ARCH_CINTEGRATOR
default y if ARCH_INTEGRATOR_CP
- default y if M548x || M547x || M5282 || MCF547x_8x
+ default y if M548x || M547x || M5282
default y if MCF532x || MCF52x2
default y if MPC86xx || MPC83xx
default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
deleted file mode 100644
index 406830c98d56..000000000000
--- a/include/configs/M5475EVB.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF5475 board.
- *
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M5475EVB_H
-#define _M5475EVB_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT (0)
-
-#undef CONFIG_HW_WATCHDOG
-#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
-
-#define CONFIG_SLTTMR
-
-#ifdef CONFIG_FSLDMAFEC
-# define CONFIG_MII_INIT 1
-# define CONFIG_HAS_ETH1
-# define CONFIG_SYS_DMA_USE_INTSRAM 1
-# define CONFIG_SYS_DISCOVER_PHY
-# define CONFIG_SYS_RX_ETH_BUFFER 32
-# define CONFIG_SYS_TX_ETH_BUFFER 48
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CONFIG_SYS_DISCOVER_PHY
-# define FECDUPLEX FULL
-# define FECSPEED _100BASET
-# else
-# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# endif
-# endif /* CONFIG_SYS_DISCOVER_PHY */
-
-# define CONFIG_IPADDR 192.162.1.2
-# define CONFIG_NETMASK 255.255.255.0
-# define CONFIG_SERVERIP 192.162.1.1
-# define CONFIG_GATEWAYIP 192.162.1.1
-#endif
-
-#ifdef CONFIG_CMD_USB
-# define CONFIG_USB_OHCI_NEW
-
-# define CONFIG_PCI_OHCI
-
-# undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-# undef CONFIG_SYS_USB_OHCI_CPU_INIT
-# define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
-# define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561"
-# define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
-#endif
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 80000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x00008F00
-#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
-
-/* PCI */
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
-
-#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
-
-#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
-#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_SYS_PCI_IO_BUS 0x71000000
-#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS
-#define CONFIG_SYS_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_SYS_PCI_CFG_BUS 0x70000000
-#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
-#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
-#endif
-
-#define CONFIG_UDP_CHECKSUM
-
-#ifdef CONFIG_MCFFEC
-# define CONFIG_IPADDR 192.162.1.2
-# define CONFIG_NETMASK 255.255.255.0
-# define CONFIG_SERVERIP 192.162.1.1
-# define CONFIG_GATEWAYIP 192.162.1.1
-#endif /* FEC_ENET */
-
-#define CONFIG_HOSTNAME "M547xEVB"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "loadaddr=10000\0" \
- "u-boot=u-boot.bin\0" \
- "load=tftp ${loadaddr) ${u-boot}\0" \
- "upd=run load; run prog\0" \
- "prog=prot off bank 1;" \
- "era ff800000 ff83ffff;" \
- "cp.b ${loadaddr} ff800000 ${filesize};"\
- "save\0" \
- ""
-
-#define CONFIG_PRAM 512 /* 512 KB */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK
-#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
-
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000)
-#define CONFIG_SYS_INTSRAMSZ 0x8000
-
-/*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL 0x21
-#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
-#define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM1_CTRL 0x21
-#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_CFG1 0x73711630
-#define CONFIG_SYS_SDRAM_CFG2 0x46770000
-#define CONFIG_SYS_SDRAM_CTRL 0xE10B0000
-#define CONFIG_SYS_SDRAM_EMOD 0x40010000
-#define CONFIG_SYS_SDRAM_MODE 0x018D0000
-#define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA
-#ifdef CONFIG_SYS_DRAMSZ1
-# define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1)
-#else
-# define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
-
-/* Reserve 256 kB for malloc() */
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_FLASH_CFI
-# define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE)
-# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
-#ifdef CONFIG_SYS_NOR1SZ
-# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-# define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20)
-# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
-#else
-# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-# define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20)
-#endif
-#endif
-
-/* Configuration for environment
- * Environment is not embedded in u-boot but at offset 0x40000 on the flash.
- * First time runing may have env crc error warning if there is
- * no correct environment on the flash.
- */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \
- CF_CACR_IDCM)
-#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
-#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
- CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
- CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \
- CF_CACR_IEC | CF_CACR_ICINVA)
-#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
- CF_CACR_DEC | CF_CACR_DDCM_P | \
- CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
-
-/*-----------------------------------------------------------------------
- * Chipselect bank definitions
- */
-/*
- * CS0 - NOR Flash 1, 2, 4, or 8MB
- * CS1 - NOR Flash
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-#define CONFIG_SYS_CS0_BASE 0xFF800000
-#define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001)
-#define CONFIG_SYS_CS0_CTRL 0x00101980
-
-#ifdef CONFIG_SYS_NOR1SZ
-#define CONFIG_SYS_CS1_BASE 0xE0000000
-#define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CONFIG_SYS_CS1_CTRL 0x00101D80
-#endif
-
-#endif /* _M5475EVB_H */
diff --git a/include/fsl_dspi.h b/include/fsl_dspi.h
index 4fec83549e1f..ebe1803e4665 100644
--- a/include/fsl_dspi.h
+++ b/include/fsl_dspi.h
@@ -21,14 +21,8 @@ struct dspi {
u32 irsr; /* 0x30 */
u32 tfr; /* 0x34 - PUSHR */
u32 rfr; /* 0x38 - POPR */
-#ifdef CONFIG_MCF547x_8x
- u32 tfdr[4]; /* 0x3C */
- u8 resv2[0x30]; /* 0x40 */
- u32 rfdr[4]; /* 0x7C */
-#else
u32 tfdr[16]; /* 0x3C */
u32 rfdr[16]; /* 0x7C */
-#endif
};
/* Module configuration */
--
2.17.1
More information about the U-Boot
mailing list