[PATCH 10/27] ppc: Remove ve8313 board
Tom Rini
trini at konsulko.com
Sat May 15 03:34:15 CEST 2021
This board has not been converted to CONFIG_DM_PCI by the deadline.
Remove it.
Cc: Heiko Schocher <hs at denx.de>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/powerpc/cpu/mpc83xx/Kconfig | 5 -
board/ve8313/Kconfig | 9 --
board/ve8313/MAINTAINERS | 6 -
board/ve8313/Makefile | 6 -
board/ve8313/ve8313.c | 209 -------------------------
configs/ve8313_defconfig | 160 -------------------
include/configs/ve8313.h | 260 -------------------------------
7 files changed, 655 deletions(-)
delete mode 100644 board/ve8313/Kconfig
delete mode 100644 board/ve8313/MAINTAINERS
delete mode 100644 board/ve8313/Makefile
delete mode 100644 board/ve8313/ve8313.c
delete mode 100644 configs/ve8313_defconfig
delete mode 100644 include/configs/ve8313.h
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 23f7a60a44c0..0d24574ecc4d 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -8,10 +8,6 @@ choice
prompt "Target select"
optional
-config TARGET_VE8313
- bool "Support ve8313"
- select ARCH_MPC8313
-
config TARGET_VME8349
bool "Support vme8349"
select ARCH_MPC8349
@@ -304,7 +300,6 @@ source "board/freescale/mpc837xerdb/Kconfig"
source "board/ids/ids8313/Kconfig"
source "board/keymile/Kconfig"
source "board/tqc/tqm834x/Kconfig"
-source "board/ve8313/Kconfig"
source "board/gdsys/mpc8308/Kconfig"
endmenu
diff --git a/board/ve8313/Kconfig b/board/ve8313/Kconfig
deleted file mode 100644
index a63744b1546e..000000000000
--- a/board/ve8313/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_VE8313
-
-config SYS_BOARD
- default "ve8313"
-
-config SYS_CONFIG_NAME
- default "ve8313"
-
-endif
diff --git a/board/ve8313/MAINTAINERS b/board/ve8313/MAINTAINERS
deleted file mode 100644
index e3ca3325fcea..000000000000
--- a/board/ve8313/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-VE8313 BOARD
-M: Heiko Schocher <hs at denx.de>
-S: Maintained
-F: board/ve8313/
-F: include/configs/ve8313.h
-F: configs/ve8313_defconfig
diff --git a/board/ve8313/Makefile b/board/ve8313/Makefile
deleted file mode 100644
index d656bd93ab1d..000000000000
--- a/board/ve8313/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y := ve8313.o
diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c
deleted file mode 100644
index 78d401e955eb..000000000000
--- a/board/ve8313/ve8313.c
+++ /dev/null
@@ -1,209 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006-2007
- *
- * Author: Scott Wood <scottwood at freescale.com>
- *
- * (C) Copyright 2010
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <ns16550.h>
-#include <nand.h>
-
-#include <asm/bitops.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void disable_addr_trans (void);
-extern void enable_addr_trans (void);
-
-int checkboard(void)
-{
- puts("Board: ve8313\n");
- return 0;
-}
-
-static long fixed_sdram(void)
-{
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-
-#ifndef CONFIG_SYS_RAMBOOT
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- u32 msize_log2 = __ilog2(msize);
-
- out_be32(&im->sysconf.ddrlaw[0].bar,
- (CONFIG_SYS_SDRAM_BASE & 0xfffff000));
- out_be32(&im->sysconf.ddrlaw[0].ar, (LBLAWAR_EN | (msize_log2 - 1)));
- out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
-
- /*
- * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
- * or the DDR2 controller may fail to initialize correctly.
- */
- __udelay(50000);
-
-#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0)
-#warning Chip select bounds is only configurable in 16MB increments
-#endif
- out_be32(&im->ddr.csbnds[0].csbnds,
- ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
- (((CONFIG_SYS_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) &
- CSBNDS_EA));
- out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
-
- /* Currently we use only one CS, so disable the other bank. */
- out_be32(&im->ddr.cs_config[1], 0);
-
- out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
- out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
- out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
- out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
- out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
-
- out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG);
-
- out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2);
- out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
- out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2);
-
- out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
- sync();
-
- /* enable DDR controller */
- setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
-
- /* now check the real size */
- disable_addr_trans ();
- msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, msize);
- enable_addr_trans ();
-#endif
-
- return msize;
-}
-
-int dram_init(void)
-{
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile fsl_lbc_t *lbc = &im->im_lbc;
- u32 msize;
-
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
- return -1;
-
- /* DDR SDRAM - Main SODIMM */
- msize = fixed_sdram();
-
- /* Local Bus setup lbcr and mrtpr */
- out_be32(&lbc->lbcr, 0x00040000);
- out_be32(&lbc->mrtpr, 0x20000000);
- sync();
-
- /* return total bus SDRAM size(bytes) -- DDR */
- gd->ram_size = msize;
-
- return 0;
-}
-
-#define VE8313_WDT_EN 0x00020000
-#define VE8313_WDT_TRIG 0x00040000
-
-int board_early_init_f (void)
-{
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio;
-
-#if defined(CONFIG_HW_WATCHDOG)
- /* enable WDT */
- clrbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG);
-#else
- /* disable WDT */
- setbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG);
-#endif
- /* set WDT pins as output */
- setbits_be32(&gpio->dir, VE8313_WDT_EN | VE8313_WDT_TRIG);
-
- return 0;
-}
-
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio;
- unsigned long reg;
-
- reg = in_be32(&gpio->dat);
- if (reg & VE8313_WDT_TRIG)
- clrbits_be32(&gpio->dat, VE8313_WDT_TRIG);
- else
- setbits_be32(&gpio->dat, VE8313_WDT_TRIG);
-}
-#endif
-
-
-#if defined(CONFIG_PCI)
-static struct pci_region pci_regions[] = {
- {
- bus_start: CONFIG_SYS_PCI1_MEM_BASE,
- phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
- size: CONFIG_SYS_PCI1_MEM_SIZE,
- flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
- },
- {
- bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
- phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
- size: CONFIG_SYS_PCI1_MMIO_SIZE,
- flags: PCI_REGION_MEM
- },
- {
- bus_start: CONFIG_SYS_PCI1_IO_BASE,
- phys_start: CONFIG_SYS_PCI1_IO_PHYS,
- size: CONFIG_SYS_PCI1_IO_SIZE,
- flags: PCI_REGION_IO
- }
-};
-
-void pci_init_board(void)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
- volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
- struct pci_region *reg[] = { pci_regions };
-
- /* Enable all 3 PCI_CLK_OUTPUTs. */
- setbits_be32(&clk->occr, 0xe0000000);
-
- /*
- * Configure PCI Local Access Windows
- */
- out_be32(&pci_law[0].bar, CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR);
- out_be32(&pci_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
- out_be32(&pci_law[1].bar, CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR);
- out_be32(&pci_law[1].ar, LBLAWAR_EN | LBLAWAR_1MB);
-
- mpc83xx_pci_init(1, reg);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
-
- return 0;
-}
-#endif
diff --git a/configs/ve8313_defconfig b/configs/ve8313_defconfig
deleted file mode 100644
index ed98cd1936ac..000000000000
--- a/configs/ve8313_defconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_CLK_FREQ=32000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_VE8313=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_25_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_LALE_TIMING_EARLIER=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI_MMIO"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR_PCIIO_BCSR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="INITRAM_FLASH"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT7=y
-CONFIG_BAT7_NAME="FPGA_SRAM_NAND"
-CONFIG_BAT7_BASE=0x60000000
-CONFIG_BAT7_LENGTH_256_MBYTES=y
-CONFIG_BAT7_ACCESS_RW=y
-CONFIG_BAT7_ICACHE_GUARDED=y
-CONFIG_BAT7_DCACHE_GUARDED=y
-CONFIG_BAT7_USER_MODE_VALID=y
-CONFIG_BAT7_SUPERVISOR_MODE_VALID=y
-CONFIG_NAND_LBLAWBAR_PRELIM_1=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0x61000000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_SCY_5=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0x61000000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_OR1_BCTLD_NOT_ASSERTED=y
-CONFIG_OR1_SCY_2=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_RST_ONE_CLOCK=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="NVRAM"
-CONFIG_BR2_OR2_BASE=0x60000000
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_SCY_3=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="SRAM"
-CONFIG_BR3_OR3_BASE=0x62000000
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_OR3_AM_32_MBYTES=y
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_EADC_3=y
-CONFIG_LCRR_CLKDIV_2=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE060000
-CONFIG_ENV_ADDR_REDUND=0xFE080000
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
deleted file mode 100644
index 91249f2eb482..000000000000
--- a/include/configs/ve8313.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
- *
- * (C) Copyright 2010
- * Heiko Schocher, DENX Software Engineering, hs at denx.de.
- */
-/*
- * ve8313 board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300 1
-
-#define CONFIG_PCI_INDIRECT_BRIDGE 1
-
-/*
- * On-board devices
- *
- */
-
-/*
- * Device configurations
- */
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-
-/*
- * Manually set up DDR parameters, as this board does not
- * have the SPD connected to I2C.
- */
-#define CONFIG_SYS_DDR_SIZE 128 /* MB */
-#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
- | CSCONFIG_AP \
- | CSCONFIG_ODT_RD_NEVER \
- | CSCONFIG_ODT_WR_ALL \
- | CSCONFIG_ROW_BIT_13 \
- | CSCONFIG_COL_BIT_10)
- /* 0x80840102 */
-
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
- | (0 << TIMING_CFG0_WRT_SHIFT) \
- | (3 << TIMING_CFG0_RRT_SHIFT) \
- | (2 << TIMING_CFG0_WWT_SHIFT) \
- | (7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
- | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
- /* 0x0e720802 */
-#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
- | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \
- | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
- | (5 << TIMING_CFG1_CASLAT_SHIFT) \
- | (6 << TIMING_CFG1_REFREC_SHIFT) \
- | (2 << TIMING_CFG1_WRREC_SHIFT) \
- | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
- | (2 << TIMING_CFG1_WRTORD_SHIFT))
- /* 0x26256222 */
-#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
- | (5 << TIMING_CFG2_CPO_SHIFT) \
- | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
- | (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
- | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
- | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
- | (7 << TIMING_CFG2_FOUR_ACT_SHIFT))
- /* 0x029028c7 */
-#define CONFIG_SYS_DDR_INTERVAL ((0x320 << SDRAM_INTERVAL_REFINT_SHIFT) \
- | (0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
- /* 0x03202000 */
-#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
- | SDRAM_CFG_SDRAM_TYPE_DDR2 \
- | SDRAM_CFG_DBW_32)
- /* 0x43080000 */
-#define CONFIG_SYS_SDRAM_CFG2 0x00401000
-#define CONFIG_SYS_DDR_MODE ((0x4440 << SDRAM_MODE_ESD_SHIFT) \
- | (0x0232 << SDRAM_MODE_SD_SHIFT))
- /* 0x44400232 */
-#define CONFIG_SYS_DDR_MODE_2 0x8000C000
-
-#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
- /*0x02000000*/
-#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
- | DDRCDR_PZ_NOMZ \
- | DDRCDR_NZ_NOMZ \
- | DDRCDR_M_ODR)
- /* 0x73000002 */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
-
-/*
- * NAND settings
- */
-#define CONFIG_SYS_NAND_BASE 0x61000000
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_NAND_FSL_ELBC 1
-#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-
-
-
-/* Still needed for spl_minimal.c */
-#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM
-#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM
-
-
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-#if defined(CONFIG_PCI)
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
-#endif
-
-/*
- * TSEC
- */
-
-#define CONFIG_TSEC1
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME "TSEC1"
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define TSEC1_PHY_ADDR 0x01
-#define TSEC1_FLAGS 0
-#define TSEC1_PHYIDX 0
-#endif
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC1"
-
-/*
- * Environment
- */
-/* Address and size of Redundant Environment Sector */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH (0x01000000 | \
- SICRH_ETSEC2_B | \
- SICRH_ETSEC2_C | \
- SICRH_ETSEC2_D | \
- SICRH_ETSEC2_E | \
- SICRH_ETSEC2_F | \
- SICRH_ETSEC2_G | \
- SICRH_TSOBI1 | \
- SICRH_TSOBI2)
- /* 0x010fff03 */
-#define CONFIG_SYS_SICRL (SICRL_LBC | \
- SICRL_SPI_A | \
- SICRL_SPI_B | \
- SICRL_SPI_C | \
- SICRL_SPI_D | \
- SICRL_ETSEC2_A)
- /* 0x33fc0003) */
-
-#define CONFIG_NETDEV eth0
-
-#define CONFIG_HOSTNAME "ve8313"
-#define CONFIG_UBOOTPATH ve8313/u-boot.bin
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=" __stringify(CONFIG_NETDEV) "\0" \
- "ethprime=" __stringify(CONFIG_TSEC1_NAME) "\0" \
- "u-boot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "u-boot_addr_r=100000\0" \
- "load=tftp ${u-boot_addr_r} ${u-boot}\0" \
- "update=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \
- " +${filesize};" \
- "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
- "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE) \
- " ${filesize};" \
- "protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \
-
-#endif /* __CONFIG_H */
--
2.17.1
More information about the U-Boot
mailing list