[PATCH 22/27] ppc: Remove MPC8315ERDB board

Tom Rini trini at konsulko.com
Sat May 15 03:34:27 CEST 2021


This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  As this is the last
ARCH_MPC8315 platform, remove that support as well.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/powerpc/cpu/mpc83xx/Kconfig             |  14 -
 arch/powerpc/cpu/mpc83xx/hrcw/Kconfig        |   3 +-
 arch/powerpc/cpu/mpc83xx/speed.c             |  41 +-
 arch/powerpc/include/asm/arch-mpc83xx/gpio.h |   3 +-
 arch/powerpc/include/asm/global_data.h       |   5 +-
 arch/powerpc/include/asm/immap_83xx.h        |  45 ---
 arch/powerpc/include/asm/mpc8xxx_spi.h       |   1 -
 board/freescale/mpc8315erdb/Kconfig          |  12 -
 board/freescale/mpc8315erdb/MAINTAINERS      |   7 -
 board/freescale/mpc8315erdb/Makefile         |   6 -
 board/freescale/mpc8315erdb/README           | 105 ------
 board/freescale/mpc8315erdb/mpc8315erdb.c    | 249 -------------
 board/freescale/mpc8315erdb/sdram.c          | 115 ------
 configs/MPC8315ERDB_defconfig                | 156 --------
 include/configs/MPC8315ERDB.h                | 370 -------------------
 include/mpc83xx.h                            |  39 +-
 16 files changed, 11 insertions(+), 1160 deletions(-)
 delete mode 100644 board/freescale/mpc8315erdb/Kconfig
 delete mode 100644 board/freescale/mpc8315erdb/MAINTAINERS
 delete mode 100644 board/freescale/mpc8315erdb/Makefile
 delete mode 100644 board/freescale/mpc8315erdb/README
 delete mode 100644 board/freescale/mpc8315erdb/mpc8315erdb.c
 delete mode 100644 board/freescale/mpc8315erdb/sdram.c
 delete mode 100644 configs/MPC8315ERDB_defconfig
 delete mode 100644 include/configs/MPC8315ERDB.h

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index a67216a2f460..d1b774f8d55f 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -8,11 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_MPC8315ERDB
-	bool "Support MPC8315ERDB"
-	select ARCH_MPC8315
-	select BOARD_EARLY_INIT_F
-
 config TARGET_MPC8323ERDB
 	bool "Support MPC8323ERDB"
 	select ARCH_MPC832X
@@ -175,14 +170,6 @@ config ARCH_MPC8313
 	select MPC83XX_SECOND_I2C_SUPPORT
 	select FSL_ELBC
 
-config ARCH_MPC8315
-	bool
-	select ARCH_MPC831X
-	select MPC83XX_PCIE1_SUPPORT
-	select MPC83XX_PCIE2_SUPPORT
-	select MPC83XX_SATA_SUPPORT
-	select FSL_ELBC
-
 config ARCH_MPC832X
 	bool
 	select MPC83XX_QUICC_ENGINE
@@ -265,7 +252,6 @@ endmenu
 config FSL_ELBC
 	bool
 
-source "board/freescale/mpc8315erdb/Kconfig"
 source "board/freescale/mpc8323erdb/Kconfig"
 source "board/freescale/mpc832xemds/Kconfig"
 source "board/freescale/mpc8349emds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
index c657a47b1143..75ec9c9a3464 100644
--- a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
@@ -19,7 +19,7 @@ config DDR_MC_CLOCK_MODE_1_2
 	bool "1 : 2"
 
 config DDR_MC_CLOCK_MODE_1_1
-	depends on ARCH_MPC8315 || ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
 	bool "1 : 1"
 
 endchoice
@@ -143,7 +143,6 @@ config CORE_PLL_VCO_DIVIDER_4
 	bool "4"
 
 config CORE_PLL_VCO_DIVIDER_8
-	depends on !ARCH_MPC8315
 	bool "8"
 
 endchoice
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index 58e197f12082..e5db96b328d5 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -104,9 +104,6 @@ int get_clocks(void)
 #if !defined(CONFIG_ARCH_MPC832X)
 	u32 i2c2_clk;
 #endif
-#if defined(CONFIG_ARCH_MPC8315)
-	u32 tdm_clk;
-#endif
 #if defined(CONFIG_FSL_ESDHC)
 	u32 sdhc_clk;
 #endif
@@ -130,7 +127,7 @@ int get_clocks(void)
 	u32 pciexp1_clk;
 	u32 pciexp2_clk;
 #endif
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
 	u32 sata_clk;
 #endif
 
@@ -200,8 +197,8 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \
-	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC834X) || \
+	defined(CONFIG_ARCH_MPC837X)
 	switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
 	case 0:
 		tsec2_clk = 0;
@@ -294,25 +291,6 @@ int get_clocks(void)
 		return -8;
 	}
 #endif
-#if defined(CONFIG_ARCH_MPC8315)
-	switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
-	case 0:
-		tdm_clk = 0;
-		break;
-	case 1:
-		tdm_clk = csb_clk;
-		break;
-	case 2:
-		tdm_clk = csb_clk / 2;
-		break;
-	case 3:
-		tdm_clk = csb_clk / 3;
-		break;
-	default:
-		/* unknown SCCR_TDMCM value */
-		return -8;
-	}
-#endif
 
 #if defined(CONFIG_ARCH_MPC834X)
 	i2c1_clk = tsec2_clk;
@@ -372,7 +350,7 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
 	switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
 	case 0:
 		sata_clk = 0;
@@ -462,9 +440,6 @@ int get_clocks(void)
 #if defined(CONFIG_ARCH_MPC834X)
 	gd->arch.usbmph_clk = usbmph_clk;
 #endif
-#if defined(CONFIG_ARCH_MPC8315)
-	gd->arch.tdm_clk = tdm_clk;
-#endif
 #if defined(CONFIG_FSL_ESDHC)
 	gd->arch.sdhc_clk = sdhc_clk;
 #endif
@@ -491,7 +466,7 @@ int get_clocks(void)
 	gd->arch.pciexp1_clk = pciexp1_clk;
 	gd->arch.pciexp2_clk = pciexp2_clk;
 #endif
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
 	gd->arch.sata_clk = sata_clk;
 #endif
 	gd->pci_clk = pci_sync_in;
@@ -559,10 +534,6 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc,
 	printf("  I2C2:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.i2c2_clk));
 #endif
-#if defined(CONFIG_ARCH_MPC8315)
-	printf("  TDM:                 %-4s MHz\n",
-	       strmhz(buf, gd->arch.tdm_clk));
-#endif
 #if defined(CONFIG_FSL_ESDHC)
 	printf("  SDHC:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.sdhc_clk));
@@ -590,7 +561,7 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc,
 	printf("  PCIEXP2:             %-4s MHz\n",
 	       strmhz(buf, gd->arch.pciexp2_clk));
 #endif
-#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X)
 	printf("  SATA:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.sata_clk));
 #endif
diff --git a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
index 8a6896e6229c..b7406751838a 100644
--- a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
+++ b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
@@ -6,8 +6,7 @@
 /*
  * The MCP83xx's 1-2 GPIO controllers each with 32 bits.
  */
-#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308) || \
-	defined(CONFIG_ARCH_MPC8315)
+#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308)
 #define MPC83XX_GPIO_CTRLRS 1
 #elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) || \
 	defined(CONFIG_ARCH_MPC8309)
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 192a02d347e7..5c3de48cc808 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -45,9 +45,6 @@ struct arch_global_data {
 # if defined(CONFIG_ARCH_MPC834X)
 	u32 usbmph_clk;
 # endif /* CONFIG_ARCH_MPC834X */
-# if defined(CONFIG_ARCH_MPC8315)
-	u32 tdm_clk;
-# endif
 	u32 core_clk;
 	u32 enc_clk;
 	u32 lbiu_clk;
@@ -57,7 +54,7 @@ struct arch_global_data {
 	u32 pciexp1_clk;
 	u32 pciexp2_clk;
 # endif
-# if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
+# if defined(CONFIG_ARCH_MPC837X)
 	u32 sata_clk;
 # endif
 # if defined(CONFIG_ARCH_MPC8360)
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index a03f938d9f49..d2443dc90d50 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -714,51 +714,6 @@ typedef struct immap {
 	u8			res7[0xC0000];
 } immap_t;
 
-#elif defined(CONFIG_ARCH_MPC8315)
-typedef struct immap {
-	sysconf83xx_t		sysconf;	/* System configuration */
-	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
-	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
-	rtclk83xx_t		pit;		/* Periodic Interval Timer */
-	gtm83xx_t		gtm[2];		/* Global Timers Module */
-	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
-	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
-	reset83xx_t		reset;		/* Reset Module */
-	clk83xx_t		clk;		/* System Clock Module */
-	pmc83xx_t		pmc;		/* Power Management Control Module */
-	gpio83xx_t		gpio[1];	/* General purpose I/O module */
-	u8			res0[0x1300];
-	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
-	fsl_i2c_t		i2c[1];		/* I2C Controllers */
-	u8			res1[0x1400];
-	duart83xx_t		duart[2];	/* DUART */
-	u8			res2[0x900];
-	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
-	u8			res3[0x1000];
-	spi8xxx_t		spi;		/* Serial Peripheral Interface */
-	dma83xx_t		dma;		/* DMA */
-	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
-	u8			res4[0x80];
-	ios83xx_t		ios;		/* Sequencer */
-	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
-	u8			res5[0xa00];
-	pex83xx_t		pciexp[2];	/* PCI Express Controller */
-	u8			res6[0xb000];
-	tdm83xx_t		tdm;		/* TDM Controller */
-	u8			res7[0x1e00];
-	sata83xx_t		sata[2];	/* SATA Controller */
-	u8			res8[0x9000];
-	usb83xx_t		usb[1];		/* USB DR Controller */
-	tsec83xx_t		tsec[2];
-	u8			res9[0x6000];
-	tdmdmac83xx_t		tdmdmac;	/* TDM DMAC */
-	u8			res10[0x2000];
-	security83xx_t		security;
-	u8			res11[0xA3000];
-	serdes83xx_t		serdes[1];	/* SerDes Registers */
-	u8			res12[0x1CF00];
-} immap_t;
-
 #elif defined(CONFIG_ARCH_MPC8308)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
diff --git a/arch/powerpc/include/asm/mpc8xxx_spi.h b/arch/powerpc/include/asm/mpc8xxx_spi.h
index 470ee955f303..f2210a14aeae 100644
--- a/arch/powerpc/include/asm/mpc8xxx_spi.h
+++ b/arch/powerpc/include/asm/mpc8xxx_spi.h
@@ -13,7 +13,6 @@
 #if defined(CONFIG_ARCH_MPC8308) || \
 	defined(CONFIG_ARCH_MPC8309) || \
 	defined(CONFIG_ARCH_MPC8313) || \
-	defined(CONFIG_ARCH_MPC8315) || \
 	defined(CONFIG_ARCH_MPC834X) || \
 	defined(CONFIG_ARCH_MPC837X)
 
diff --git a/board/freescale/mpc8315erdb/Kconfig b/board/freescale/mpc8315erdb/Kconfig
deleted file mode 100644
index f76b0d1d6dbc..000000000000
--- a/board/freescale/mpc8315erdb/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8315ERDB
-
-config SYS_BOARD
-	default "mpc8315erdb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8315ERDB"
-
-endif
diff --git a/board/freescale/mpc8315erdb/MAINTAINERS b/board/freescale/mpc8315erdb/MAINTAINERS
deleted file mode 100644
index cdac1ac2eed4..000000000000
--- a/board/freescale/mpc8315erdb/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MPC8315ERDB BOARD
-#M:	Dave Liu <daveliu at freescale.com>
-S:	Orphan (since 2018-05)
-F:	board/freescale/mpc8315erdb/
-F:	include/configs/MPC8315ERDB.h
-F:	configs/MPC8315ERDB_defconfig
-F:	configs/MPC8315ERDB_NANDSPL_defconfig
diff --git a/board/freescale/mpc8315erdb/Makefile b/board/freescale/mpc8315erdb/Makefile
deleted file mode 100644
index 579181999d42..000000000000
--- a/board/freescale/mpc8315erdb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y	:= mpc8315erdb.o sdram.o
diff --git a/board/freescale/mpc8315erdb/README b/board/freescale/mpc8315erdb/README
deleted file mode 100644
index 8ad6d810c79e..000000000000
--- a/board/freescale/mpc8315erdb/README
+++ /dev/null
@@ -1,105 +0,0 @@
-Freescale MPC8315ERDB Board
------------------------------------------
-
-1.	Board Switches and Jumpers
-
-	S3 is used to set CONFIG_SYS_RESET_SOURCE.
-
-	To boot the image at 0xFE000000 in NOR flash, use these DIP
-	switch settings for S3 S4:
-
-	+------+	+------+
-	|      |	| **** |
-	| **** |	|      |
-	+------+ ON	+------+ ON
-	  4321		  4321
-	(where the '*' indicates the position of the tab of the switch.)
-
-	To boot the image at the beginning of NAND flash, use these
-	DIP switch settings for S3 S4:
-
-	+------+	+------+
-	| *    |	|  *** |
-	|  *** |	| *    |
-	+------+ ON	+------+ ON
-	  4321		  4321
-	(where the '*' indicates the position of the tab of the switch.)
-
-	When booting from NAND, use u-boot-nand.bin, not u-boot.bin.
-
-2.	Memory Map
-	The memory map looks like this:
-
-	0x0000_0000	0x07ff_ffff	DDR		 128M
-	0x8000_0000	0x8fff_ffff	PCI MEM		 256M
-	0x9000_0000	0x9fff_ffff	PCI_MMIO	 256M
-	0xe000_0000	0xe00f_ffff	IMMR		 1M
-	0xe030_0000	0xe03f_ffff	PCI IO		 1M
-	0xe060_0000	0xe060_7fff	NAND FLASH (CS1) 32K
-	0xfe00_0000	0xfe7f_ffff	NOR FLASH (CS0)	 8M
-
-	When booting from NAND, NAND flash is CS0 and NOR flash
-	is CS1.
-
-3.	Definitions
-
-3.1	Explanation of NEW definitions in:
-
-	include/configs/MPC8315ERDB.h
-
-	CONFIG_MPC83xx		MPC83xx family
-	CONFIG_MPC831x		MPC831x specific
-	CONFIG_MPC8315		MPC8315 specific
-	CONFIG_MPC8315ERDB	MPC8315ERDB board specific
-
-4.	Compilation
-
-	Assuming you're using BASH (or similar) as your shell:
-
-	export CROSS_COMPILE=your-cross-compiler-prefix-
-	make distclean
-	make MPC8315ERDB_config (or MPC8315ERDB_NAND_config for u-boot-nand.bin)
-	make all
-
-5.	Downloading and Flashing Images
-
-5.1	Reflash U-Boot Image using U-Boot
-
-	NOR flash:
-
-	tftp 40000 u-boot.bin
-	protect off all
-	erase fe000000 fe1fffff
-
-	cp.b 40000 fe000000 xxxx
-	protect on all
-
-	You have to supply the correct byte count with 'xxxx'
-	from the TFTP result log.
-
-	NAND flash:
-
-	=>tftpboot $loadaddr <filename>
-	=>nand erase 0 0x80000
-	=>nand write $loadaddr 0 0x80000
-
-	...where 0x80000 is the filesize rounded up to
-	the next 0x20000 increment.
-
-5.2	Downloading and Booting Linux Kernel
-
-	Ensure that all networking-related environment variables are set
-	properly (including ipaddr, serverip, gatewayip (if needed),
-	netmask, ethaddr, eth1addr, rootpath (if using NFS root),
-	fdtfile, and bootfile).
-
-	Then, do one of the following, depending on whether you
-	want an NFS root or a ramdisk root:
-
-	=>run nfsboot
-	or
-	=>run ramboot
-
-6	Notes
-
-	The console baudrate for MPC8315ERDB is 115200bps.
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c
deleted file mode 100644
index e89d5d495595..000000000000
--- a/board/freescale/mpc8315erdb/mpc8315erdb.c
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Author: Scott Wood <scottwood at freescale.com>
- *         Dave Liu <daveliu at freescale.com>
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <nand.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
-	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
-		gd->flags |= GD_FLG_SILENT;
-
-	return 0;
-}
-
-#ifndef CONFIG_NAND_SPL
-
-static u8 read_board_info(void)
-{
-	u8 val8;
-	i2c_set_bus_num(0);
-
-	if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
-		return val8;
-	else
-		return 0;
-}
-
-int checkboard(void)
-{
-	static const char * const rev_str[] = {
-		"0.0",
-		"0.1",
-		"1.0",
-		"1.1",
-		"<unknown>",
-	};
-	u8 info;
-	int i;
-
-	info = read_board_info();
-	i = (!info) ? 4: info & 0x03;
-
-	printf("Board: Freescale MPC8315ERDB Rev %s\n", rev_str[i]);
-
-	return 0;
-}
-
-static struct pci_region pci_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI_MEM_PHYS,
-		size: CONFIG_SYS_PCI_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
-		size: CONFIG_SYS_PCI_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-	{
-		bus_start: CONFIG_SYS_PCI_IO_BASE,
-		phys_start: CONFIG_SYS_PCI_IO_PHYS,
-		size: CONFIG_SYS_PCI_IO_SIZE,
-		flags: PCI_REGION_IO
-	}
-};
-
-static struct pci_region pcie_regions_0[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE1_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
-		.size = CONFIG_SYS_PCIE1_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-static struct pci_region pcie_regions_1[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE2_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE2_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
-		.size = CONFIG_SYS_PCIE2_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-void pci_init_board(void)
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile sysconf83xx_t *sysconf = &immr->sysconf;
-	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
-	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-	volatile law83xx_t *pcie_law = sysconf->pcielaw;
-	struct pci_region *reg[] = { pci_regions };
-	struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
-
-	/* Enable all 3 PCI_CLK_OUTPUTs. */
-	clk->occr |= 0xe0000000;
-
-	/*
-	 * Configure PCI Local Access Windows
-	 */
-	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
-
-	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
-
-	mpc83xx_pci_init(1, reg);
-
-	/* Configure the clock for PCIE controller */
-	clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM,
-				    SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1);
-
-	/* Deassert the resets in the control register */
-	out_be32(&sysconf->pecr1, 0xE0008000);
-	out_be32(&sysconf->pecr2, 0xE0008000);
-	udelay(2000);
-
-	/* Configure PCI Express Local Access Windows */
-	out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	mpc83xx_pcie_init(2, pcie_reg);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void fdt_tsec1_fixup(void *fdt, struct bd_info *bd)
-{
-	const char disabled[] = "disabled";
-	const char *path;
-	int ret;
-
-	if (hwconfig_arg_cmp("board_type", "tsec1")) {
-		return;
-	} else if (!hwconfig_arg_cmp("board_type", "ulpi")) {
-		printf("NOTICE: No or unknown board_type hwconfig specified.\n"
-		       "        Assuming board with TSEC1.\n");
-		return;
-	}
-
-	ret = fdt_path_offset(fdt, "/aliases");
-	if (ret < 0) {
-		printf("WARNING: can't find /aliases node\n");
-		return;
-	}
-
-	path = fdt_getprop(fdt, ret, "ethernet0", NULL);
-	if (!path) {
-		printf("WARNING: can't find ethernet0 alias\n");
-		return;
-	}
-
-	do_fixup_by_path(fdt, path, "status", disabled, sizeof(disabled), 1);
-}
-
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	fsl_fdt_fixup_dr_usb(blob, bd);
-	fdt_tsec1_fixup(blob, bd);
-
-	return 0;
-}
-#endif
-
-int board_eth_init(struct bd_info *bis)
-{
-	cpu_eth_init(bis);	/* Initialize TSECs first */
-	return pci_eth_init(bis);
-}
-
-#else /* CONFIG_NAND_SPL */
-
-int checkboard(void)
-{
-	puts("Board: Freescale MPC8315ERDB\n");
-	return 0;
-}
-
-void board_init_f(ulong bootflag)
-{
-	board_early_init_f();
-	ns16550_init((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500),
-		     CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-	puts("NAND boot... ");
-	timer_init();
-	dram_init();
-	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
-		      CONFIG_SYS_NAND_U_BOOT_RELOC);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	nand_boot();
-}
-
-void putc(char c)
-{
-	if (gd->flags & GD_FLG_SILENT)
-		return;
-
-	if (c == '\n')
-		ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), '\r');
-
-	ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), c);
-}
-
-#endif /* CONFIG_NAND_SPL */
diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c
deleted file mode 100644
index ffbb79aaec14..000000000000
--- a/board/freescale/mpc8315erdb/sdram.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Authors: Nick.Spence at freescale.com
- *          Wilson.Lo at freescale.com
- *          scottwood at freescale.com
- */
-
-#include <common.h>
-#include <init.h>
-#include <mpc83xx.h>
-#include <spd_sdram.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <asm/bitops.h>
-#include <asm/io.h>
-
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void resume_from_sleep(void)
-{
-	u32 magic = *(u32 *)0;
-
-	typedef void (*func_t)(void);
-	func_t resume = *(func_t *)4;
-
-	if (magic == 0xf5153ae5)
-		resume();
-
-	gd->flags &= ~GD_FLG_SILENT;
-	puts("\nResume from sleep failed: bad magic word\n");
-}
-
-/* Fixed sdram init -- doesn't use serial presence detect.
- *
- * This is useful for faster booting in configs where the RAM is unlikely
- * to be changed, or for things like NAND booting where space is tight.
- */
-#ifndef CONFIG_SYS_RAMBOOT
-static long fixed_sdram(void)
-{
-	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-	u32 msize_log2 = __ilog2(msize);
-
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE  & 0xfffff000;
-	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
-	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
-
-	/*
-	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
-	 * or the DDR2 controller may fail to initialize correctly.
-	 */
-	__udelay(50000);
-
-	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
-	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-
-	/* Currently we use only one CS, so disable the other bank. */
-	im->ddr.cs_config[1] = 0;
-
-	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-
-	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
-		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI;
-	else
-		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
-
-	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	sync();
-
-	/* enable DDR controller */
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-	sync();
-
-	return msize;
-}
-#else
-static long fixed_sdram(void)
-{
-	return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-}
-#endif /* CONFIG_SYS_RAMBOOT */
-
-int dram_init(void)
-{
-	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	u32 msize;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -ENXIO;
-
-	/* DDR SDRAM */
-	msize = fixed_sdram();
-
-	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
-		resume_from_sleep();
-
-	/* set total bus SDRAM size(bytes)  -- DDR */
-	gd->ram_size = msize;
-
-	return 0;
-}
diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig
deleted file mode 100644
index fa22196526c0..000000000000
--- a/configs/MPC8315ERDB_defconfig
+++ /dev/null
@@ -1,156 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=66666667
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8315ERDB=y
-CONFIG_SYSTEM_PLL_VCO_DIV_2=y
-CONFIG_CORE_PLL_RATIO_3_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_RGMII=y
-CONFIG_TSEC2_MODE_RGMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_128_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="IMMRBAR"
-CONFIG_BAT1_BASE=0xE0000000
-CONFIG_BAT1_LENGTH_8_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_INHIBITED=y
-CONFIG_BAT1_ICACHE_GUARDED=y
-CONFIG_BAT1_DCACHE_INHIBITED=y
-CONFIG_BAT1_DCACHE_GUARDED=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="FLASH"
-CONFIG_BAT2_BASE=0xFE000000
-CONFIG_BAT2_LENGTH_32_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT3=y
-CONFIG_BAT3_NAME="STACK_IN_DCACHE"
-CONFIG_BAT3_BASE=0xE6000000
-CONFIG_BAT3_ACCESS_RW=y
-CONFIG_BAT3_USER_MODE_VALID=y
-CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT4=y
-CONFIG_BAT4_NAME="PCI_MEM_PHYS"
-CONFIG_BAT4_BASE=0x80000000
-CONFIG_BAT4_LENGTH_256_MBYTES=y
-CONFIG_BAT4_ACCESS_RW=y
-CONFIG_BAT4_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT4_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT4_USER_MODE_VALID=y
-CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="PCI_MMIO_PHYS"
-CONFIG_BAT5_BASE=0x90000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_8_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE0600000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_DPM=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSECEP_3=y
-CONFIG_LCRR_CLKDIV_2=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=e0600000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e0600000.flash:512k(uboot),128k(env),6m at 1m(kernel),-(fs)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_ADDR=0xFE080000
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_EEPRO100=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
deleted file mode 100644
index 688aa5ea9867..000000000000
--- a/include/configs/MPC8315ERDB.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu at freescale.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1 /* E300 family */
-
-/*
- * System IO Config
- */
-#define CONFIG_SYS_SICRH		0x00000000
-#define CONFIG_SYS_SICRL		0x00000000 /* 3.3V, no delay */
-
-#define CONFIG_HWCONFIG
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_EN \
-				| DDRCDR_PZ_LOZ \
-				| DDRCDR_NZ_LOZ \
-				| DDRCDR_ODT \
-				| DDRCDR_Q_DRN)
-				/* 0x7b880001 */
-/*
- * Manually set up DDR parameters
- * consist of two chips HY5PS12621BFP-C4 from HYNIX
- */
-#define CONFIG_SYS_DDR_SIZE		128 /* MB */
-#define CONFIG_SYS_DDR_CS0_BNDS	0x00000007
-#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN \
-				| CSCONFIG_ODT_RD_NEVER \
-				| CSCONFIG_ODT_WR_ONLY_CURRENT \
-				| CSCONFIG_ROW_BIT_13 \
-				| CSCONFIG_COL_BIT_10)
-				/* 0x80010102 */
-#define CONFIG_SYS_DDR_TIMING_3	0x00000000
-#define CONFIG_SYS_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
-				| (0 << TIMING_CFG0_WRT_SHIFT) \
-				| (0 << TIMING_CFG0_RRT_SHIFT) \
-				| (0 << TIMING_CFG0_WWT_SHIFT) \
-				| (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
-				| (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
-				| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
-				| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
-				/* 0x00220802 */
-#define CONFIG_SYS_DDR_TIMING_1	((2 << TIMING_CFG1_PRETOACT_SHIFT) \
-				| (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \
-				| (2 << TIMING_CFG1_ACTTORW_SHIFT) \
-				| (5 << TIMING_CFG1_CASLAT_SHIFT) \
-				| (6 << TIMING_CFG1_REFREC_SHIFT) \
-				| (2 << TIMING_CFG1_WRREC_SHIFT) \
-				| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
-				| (2 << TIMING_CFG1_WRTORD_SHIFT))
-				/* 0x27256222 */
-#define CONFIG_SYS_DDR_TIMING_2	((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
-				| (4 << TIMING_CFG2_CPO_SHIFT) \
-				| (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
-				| (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
-				| (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
-				| (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
-				| (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
-				/* 0x121048c5 */
-#define CONFIG_SYS_DDR_INTERVAL	((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \
-				| (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
-				/* 0x03600100 */
-#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SREN \
-				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
-				| SDRAM_CFG_DBW_32)
-				/* 0x43080000 */
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000 /* 1 posted refresh */
-#define CONFIG_SYS_DDR_MODE		((0x0448 << SDRAM_MODE_ESD_SHIFT) \
-				| (0x0232 << SDRAM_MODE_SD_SHIFT))
-				/* ODT 150ohm CL=3, AL=1 on SDRAM */
-#define CONFIG_SYS_DDR_MODE2	0x00000000
-
-/*
- * Memory test
- */
-#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024) /* Reserve 512 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(512 * 1024) /* Reserved for malloc */
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-
-#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CONFIG_SYS_FLASH_SIZE		8	/* FLASH size is 8M */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
-/* 127 64KB sectors and 8 8KB top sectors per device */
-#define CONFIG_SYS_MAX_FLASH_SECT	135
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
-
-/*
- * NAND Flash on the Local Bus
- */
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_NAND_BASE		0xFFF00000
-#else
-#define CONFIG_SYS_NAND_BASE		0xE0600000
-#endif
-
-#define CONFIG_MTD_PARTITION
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_NAND_FSL_ELBC		1
-#define CONFIG_SYS_NAND_BLOCK_SIZE	16384
-#define CONFIG_SYS_NAND_WINDOW_SIZE    (32 * 1024)     /* 0x00008000 */
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-
-
-
-/* Still needed for spl_minimal.c */
-#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM
-#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM
-
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \
-	!defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
-
-/*
- * Board info - revision and where boot from
- */
-#define CONFIG_SYS_I2C_PCF8574A_ADDR	0x39
-
-/*
- * Config on-board RTC
- */
-#define CONFIG_RTC_DS1337	/* ds1339 on board, use ds1337 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68 /* at address 0x68 */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI_MEM_BASE		0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS		CONFIG_SYS_PCI_MEM_BASE
-#define CONFIG_SYS_PCI_MEM_SIZE		0x10000000 /* 256M */
-#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
-#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
-#define CONFIG_SYS_PCI_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
-#define CONFIG_SYS_PCI_IO_SIZE		0x100000 /* 1M */
-
-#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
-#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
-
-#define CONFIG_SYS_PCIE1_BASE		0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000
-#define CONFIG_SYS_PCIE1_CFG_BASE	0xB0000000
-#define CONFIG_SYS_PCIE1_CFG_SIZE	0x01000000
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xB1000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000
-
-#define CONFIG_SYS_PCIE2_BASE		0xC0000000
-#define CONFIG_SYS_PCIE2_MEM_BASE	0xC0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xC0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000
-#define CONFIG_SYS_PCIE2_CFG_BASE	0xD0000000
-#define CONFIG_SYS_PCIE2_CFG_SIZE	0x01000000
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xD1000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
-
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE
-
-#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
-
-#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_SYS_SCCR_USBDRCM		3
-
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_PHY_TYPE	"utmi"
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-/*
- * TSEC
- */
-#define CONFIG_SYS_TSEC1_OFFSET	0x24000
-#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET	0x25000
-#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-
-/*
- * TSEC ethernet configuration
- */
-#define CONFIG_TSEC1		1
-#define CONFIG_TSEC1_NAME	"eTSEC0"
-#define CONFIG_TSEC2		1
-#define CONFIG_TSEC2_NAME	"eTSEC1"
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-
-/* Options are: eTSEC[0-1] */
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-/*
- * SATA
- */
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1_OFFSET	0x18000
-#define CONFIG_SYS_SATA1	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
-#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2_OFFSET	0x19000
-#define CONFIG_SYS_SATA2	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
-#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
-
-#ifdef CONFIG_FSL_SATA
-#define CONFIG_LBA48
-#endif
-
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_WATCHDOG		/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-/*
- * MMU Setup
- */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_LOADADDR 800000	/* default location for tftp and bootm */
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"consoledev=ttyS0\0"						\
-	"ramdiskaddr=1000000\0"						\
-	"ramdiskfile=ramfs.83xx\0"					\
-	"fdtaddr=780000\0"						\
-	"fdtfile=mpc8315erdb.dtb\0"					\
-	"usb_phy_type=utmi\0"						\
-	""
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=$serverip:$rootpath "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
-
-#endif	/* __CONFIG_H */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index ea67868ea012..71cffa1b0fc8 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -243,41 +243,6 @@
 #define SICRH_TSOBI1			0x00000002
 #define SICRH_TSOBI2			0x00000001
 
-#elif defined(CONFIG_ARCH_MPC8315)
-/* SICRL bits - MPC8315 specific */
-#define SICRL_DMA_CH0			0xc0000000
-#define SICRL_DMA_SPI			0x30000000
-#define SICRL_UART			0x0c000000
-#define SICRL_IRQ4			0x02000000
-#define SICRL_IRQ5			0x01800000
-#define SICRL_IRQ6_7			0x00400000
-#define SICRL_IIC1			0x00300000
-#define SICRL_TDM			0x000c0000
-#define SICRL_TDM_SHARED		0x00030000
-#define SICRL_PCI_A			0x0000c000
-#define SICRL_ELBC_A			0x00003000
-#define SICRL_ETSEC1_A			0x000000c0
-#define SICRL_ETSEC1_B			0x00000030
-#define SICRL_ETSEC1_C			0x0000000c
-#define SICRL_TSEXPOBI			0x00000001
-
-/* SICRH bits - MPC8315 specific */
-#define SICRH_GPIO_0			0xc0000000
-#define SICRH_GPIO_1			0x30000000
-#define SICRH_GPIO_2			0x0c000000
-#define SICRH_GPIO_3			0x03000000
-#define SICRH_GPIO_4			0x00c00000
-#define SICRH_GPIO_5			0x00300000
-#define SICRH_GPIO_6			0x000c0000
-#define SICRH_GPIO_7			0x00030000
-#define SICRH_GPIO_8			0x0000c000
-#define SICRH_GPIO_9			0x00003000
-#define SICRH_GPIO_10			0x00000c00
-#define SICRH_GPIO_11			0x00000300
-#define SICRH_ETSEC2_A			0x000000c0
-#define SICRH_TSOBI1			0x00000002
-#define SICRH_TSOBI2			0x00000001
-
 #elif defined(CONFIG_ARCH_MPC837X)
 /* SICRL bits - MPC837X specific */
 #define SICRL_USB_A			0xC0000000
@@ -634,7 +599,7 @@
 #define HRCWL_CE_TO_PLL_1X30		0x0000001E
 #define HRCWL_CE_TO_PLL_1X31		0x0000001F
 
-#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315)
+#elif defined(CONFIG_ARCH_MPC8308)
 #define HRCWL_SVCOD			0x30000000
 #define HRCWL_SVCOD_SHIFT		28
 #define HRCWL_SVCOD_DIV_2		0x00000000
@@ -981,7 +946,7 @@
 #define SCCR_USBDRCM_2			0x00200000
 #define SCCR_USBDRCM_3			0x00300000
 
-#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315)
+#elif defined(CONFIG_ARCH_MPC8308)
 /* SCCR bits - MPC8315/MPC8308 specific */
 #define SCCR_TSEC1CM			0xc0000000
 #define SCCR_TSEC1CM_SHIFT		30
-- 
2.17.1



More information about the U-Boot mailing list