[PATCH 2/3] ARM: dts: imxrt1020-evk: move all u-boot, dm-spl to imxrt1020-evk-u-boot.dtsi file

[Giulio Benetti]

At the moment a lot of u-boot,dm-spl properties are present in board .dts
file but this is not correct since u-boot,dm-spl property is u-boot
specific and must be listed into the separate imrt1020-evk-u-boot.dtsi
file. So let's move every u-boot,dm-spl property present in
imxrt1020-evk.dts to imxrt1020-evk-u-boot.dtsi file.

Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
---
 arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 34 ++++++++++++++++++++++++++
 arch/arm/dts/imxrt1020.dtsi            | 10 --------
 2 files changed, 34 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/imxrt1020-evk-u-boot.dtsi b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
index 34d19e06c5..121665a2d2 100644
--- a/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
+++ b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
@@ -8,6 +8,38 @@
 	chosen {
 		u-boot,dm-spl;
 	};
+
+	clocks {
+		u-boot,dm-spl;
+	};
+
+	soc {
+		u-boot,dm-spl;
+	};
+};
+
+&osc {
+	u-boot,dm-spl;
+};
+
+&clks {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
 };
 
 &gpt1 {
@@ -19,6 +51,8 @@
 };
 
 &semc {
+	u-boot,dm-spl;
+
 	bank1: bank at 0 {
 		u-boot,dm-spl;
 	};
diff --git a/arch/arm/dts/imxrt1020.dtsi b/arch/arm/dts/imxrt1020.dtsi
index cab608c644..884d57f614 100644
--- a/arch/arm/dts/imxrt1020.dtsi
+++ b/arch/arm/dts/imxrt1020.dtsi
@@ -23,7 +23,6 @@
 	};
 
 	clocks {
-		u-boot,dm-spl;
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
 			#clock-cells = <0>;
@@ -37,7 +36,6 @@
 		};
 
 		osc: osc {
-			u-boot,dm-spl;
 			compatible = "fsl,imx-osc", "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
@@ -45,10 +43,7 @@
 	};
 
 	soc {
-		u-boot,dm-spl;
-
 		semc: semc at 402f0000 {
-			u-boot,dm-spl;
 			compatible = "fsl,imxrt-semc";
 			reg = <0x402f0000 0x4000>;
 			clocks = <&clks IMXRT1020_CLK_SEMC>;
@@ -73,7 +68,6 @@
 		};
 
 		clks: ccm at 400fc000 {
-			u-boot,dm-spl;
 			compatible = "fsl,imxrt1020-ccm";
 			reg = <0x400fc000 0x4000>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
@@ -82,7 +76,6 @@
 		};
 
 		usdhc1: usdhc at 402c0000 {
-			u-boot,dm-spl;
 			compatible = "fsl,imxrt-usdhc";
 			reg = <0x402c0000 0x10000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -95,7 +88,6 @@
 		};
 
 		gpio1: gpio at 401b8000 {
-			u-boot,dm-spl;
 			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 			reg = <0x401b8000 0x4000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
@@ -107,7 +99,6 @@
 		};
 
 		gpio2: gpio at 401bc000 {
-			u-boot,dm-spl;
 			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 			reg = <0x401bc000 0x4000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
@@ -119,7 +110,6 @@
 		};
 
 		gpio3: gpio at 401c0000 {
-			u-boot,dm-spl;
 			compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
 			reg = <0x401c0000 0x4000>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.25.1