[PATCH] spl: Kconfig: Use tabs instead of space for alignment

[Michal Simek]

A lot of entries were using spaces instead of tab for alignment that's why
it is good to fix it to use the same style everywhere.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 common/spl/Kconfig | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index df5468f1ac29..b709a05a7b79 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -165,7 +165,7 @@ config SPL_BOARD_INIT
 	  provided by the board.
 
 config SPL_BOOTROM_SUPPORT
-        bool "Support returning to the BOOTROM"
+	bool "Support returning to the BOOTROM"
 	help
 	  Some platforms (e.g. the Rockchip RK3368) provide support in their
 	  ROM for loading the next boot-stage after performing basic setup
@@ -707,7 +707,7 @@ config SYS_MMCSD_FS_BOOT_PARTITION
 	default 1
 	help
 	  Partition on the MMC to load U-Boot from when the MMC is being
-          used in fs mode
+	  used in fs mode
 
 config SPL_MMC_TINY
 	bool "Tiny MMC framework in SPL"
@@ -784,8 +784,8 @@ config SPL_NAND_SIMPLE
 config SPL_NAND_BASE
 	depends on SPL_NAND_DRIVERS
 	bool "Use Base NAND Driver"
-        help
-          Include nand_base.c in the SPL.
+	help
+	  Include nand_base.c in the SPL.
 
 config SPL_NAND_IDENT
 	depends on SPL_NAND_BASE
@@ -1301,7 +1301,7 @@ config SPL_ATF_LOAD_IMAGE_V2
 	  method, say Y.
 
 config SPL_ATF_NO_PLATFORM_PARAM
-        bool "Pass no platform parameter"
+	bool "Pass no platform parameter"
 	depends on SPL_ATF
 	help
 	  While we expect to call a pointer to a valid FDT (or NULL)
@@ -1395,7 +1395,7 @@ config TPL_BOOTCOUNT_LIMIT
 	  For example, it may be useful to choose the device to boot.
 
 config TPL_LDSCRIPT
-        string "Linker script for the TPL stage"
+	string "Linker script for the TPL stage"
 	depends on TPL
 	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
 	default "arch/\$(ARCH)/cpu/u-boot-spl.lds"
@@ -1409,7 +1409,7 @@ config TPL_LDSCRIPT
 	  fall back to the linker-script used for the SPL stage.
 
 config TPL_NEEDS_SEPARATE_TEXT_BASE
-        bool "TPL needs a separate text-base"
+	bool "TPL needs a separate text-base"
 	default n
 	depends on TPL
 	help
@@ -1418,7 +1418,7 @@ config TPL_NEEDS_SEPARATE_TEXT_BASE
 	  .text sections of the TPL stage has to be set below.
 
 config TPL_NEEDS_SEPARATE_STACK
-        bool "TPL needs a separate initial stack-pointer"
+	bool "TPL needs a separate initial stack-pointer"
 	default n
 	depends on TPL
 	help
@@ -1426,20 +1426,20 @@ config TPL_NEEDS_SEPARATE_STACK
 	  stack-pointer from the settings for the SPL stage.
 
 config TPL_TEXT_BASE
-        hex "Base address for the .text section of the TPL stage"
+	hex "Base address for the .text section of the TPL stage"
 	depends on TPL_NEEDS_SEPARATE_TEXT_BASE
 	help
 	  The base address for the .text section of the TPL stage.
 
 config TPL_MAX_SIZE
-        int "Maximum size (in bytes) for the TPL stage"
+	int "Maximum size (in bytes) for the TPL stage"
 	default 0
 	depends on TPL
 	help
 	  The maximum size (in bytes) of the TPL stage.
 
 config TPL_STACK
-        hex "Address of the initial stack-pointer for the TPL stage"
+	hex "Address of the initial stack-pointer for the TPL stage"
 	depends on TPL_NEEDS_SEPARATE_STACK
 	help
 	  The address of the initial stack-pointer for the TPL stage.
@@ -1457,7 +1457,7 @@ config TPL_READ_ONLY
 	  device-private data.
 
 config TPL_BOOTROM_SUPPORT
-        bool "Support returning to the BOOTROM (from TPL)"
+	bool "Support returning to the BOOTROM (from TPL)"
 	help
 	  Some platforms (e.g. the Rockchip RK3368) provide support in their
 	  ROM for loading the next boot-stage after performing basic setup
-- 
2.31.1