[PATCH v4 00/14] arm64: synquacer: Add SynQuacer/DeveloperBox support

[Ilias Apalodimas]

Hi Masami,

On Wed, May 19, 2021 at 02:44:21PM +0900, Masami Hiramatsu wrote:
> Hi,
> 
> Here is the 4th version of the series (including some fixes for build
> errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.
> 
> This series includes not only DeveloperBox support but also some fixes
> for the issues which I faced while porting U-Boot on the DeveloperBox.
> First 3 patches are fixes, next 1 patch is a code cleanup for generic
> gpio for arm. The next 7 patches adding DeveloperBox devices
> and board support. The last 3 patches are related to the UEFI capsule
> update (including bugfixes).
> 
> Previous version is here:
> 
>  https://lists.denx.de/pipermail/u-boot/2021-May/449305.html
> 
> 

The default debug level is set to 7.  I think it would be better to set it
to something more reasonable for the final commit.  Unfortunately I don't
have time for a more detailed review, but I did manage to run this on my
Synquacer and managed to run a full linux distro with EFI.

Tested-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>

> Changes in v4
> -------------
> 
> I dropped a PCI bugfix because it has been merged. And add I2C driver
> and enable RTC and EBBR support on the configuration.
> 
> [06/14]:
>       - Add Jaehoon's reviewed-by (Thanks!)
> [09/14]:
>       - Add a new i2c driver.
> [10/14]:
>       - Add i2c0 and RTC node.
> [11/14]:
>       - Add I2C and RTC configuration.
>       - Enable RTC and Date command.
>       - Remove I2C0 node before booting linux to hide it same as EDK2 does.
>       - Add some configurations to make it EBBR compliant.
> [14/14]:
>       - Add some config options for EBBR.
> 
> 
> BTW, should I split fixes from this series? (since I didn't expect this took
> so long...)
> 
> 
> DeveloperBox
> ============
> 
> DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: -
> * Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard
> * 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default)
> * 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots
>   (1x slots are connected via PCIe bridge chip)
> * 4 USB-3.0 ports
> * 2 SATA ports
> * 1 GbE network port
> * 1 USB-UART serial port (micro USB)
> * 64MB SPI NOR Flash
> * 8GB eMMC Flash Storage
> * 96boards LS connector
> 
> The DeveloperBox schematic can be found here: -
> https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs/mzsc2am_v03_20180115_a.pdf
> 
> And the other documents can be found here: -
> https://www.96boards.org/documentation/enterprise/developerbox/
> 
> 
> Currently, the U-Boot port supports: -
> * USB
> * eMMC
> * SPI-NOR
> * SATA
> * GbE
> 
> The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default.
> The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as
> BL33, but no need to combine with it.
> 
> 
> Thank you,
> 
> ---
> 
> Jassi Brar (4):
>       mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver
>       spi: synquacer: Add HSSPI SPI controller driver for SynQuacer
>       net: synquacer: Add netsec driver
>       i2c: synquacer: SNI Synquacer I2C controller
> 
> Masami Hiramatsu (10):
>       ata: ahci-pci: Use scsi_ops to initialize ops
>       dm: pci: Skip setting VGA bridge bits if parent device is the host bus
>       efi: Fix to use null handle to create new handle for efi_fmp_raw
>       gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs
>       pci: synquacer: Add SynQuacer ECAM based PCIe driver
>       ARM: dts: synquacer: Add device trees for DeveloperBox
>       board: synquacer: Add DeveloperBox 96boards EE support
>       dfu_mtd: Ignore non-implemented lock device failure
>       doc: qemu: arm64: Fix the documentation of capsule update
>       configs: synquacer: Enable EFI capsule update support
> 
> 
>  arch/arm/Kconfig                                   |  108 ++
>  arch/arm/dts/Makefile                              |    2 
>  arch/arm/dts/synquacer-sc2a11-caches.dtsi          |   73 +
>  .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi  |   75 +
>  arch/arm/dts/synquacer-sc2a11-developerbox.dts     |   56 +
>  arch/arm/dts/synquacer-sc2a11.dtsi                 |  595 ++++++++++
>  arch/arm/include/asm/gpio.h                        |    8 
>  board/socionext/developerbox/Kconfig               |   36 +
>  board/socionext/developerbox/MAINTAINERS           |   14 
>  board/socionext/developerbox/Makefile              |    9 
>  board/socionext/developerbox/developerbox.c        |  146 +++
>  configs/synquacer_developerbox_defconfig           |  131 ++
>  doc/board/emulation/qemu_capsule_update.rst        |   11 
>  doc/board/index.rst                                |    1 
>  doc/board/socionext/developerbox.rst               |   87 ++
>  doc/board/socionext/index.rst                      |    9 
>  drivers/ata/ahci-pci.c                             |    2 
>  drivers/dfu/dfu_mtd.c                              |    2 
>  drivers/i2c/Kconfig                                |    7 
>  drivers/i2c/Makefile                               |    1 
>  drivers/i2c/synquacer_i2c.c                        |  338 ++++++
>  drivers/mmc/Kconfig                                |   10 
>  drivers/mmc/Makefile                               |    1 
>  drivers/mmc/f_sdh30.c                              |   81 +
>  drivers/net/Kconfig                                |    8 
>  drivers/net/Makefile                               |    1 
>  drivers/net/sni_netsec.c                           | 1134 ++++++++++++++++++++
>  drivers/pci/Kconfig                                |   12 
>  drivers/pci/Makefile                               |    1 
>  drivers/pci/pci-uclass.c                           |    3 
>  drivers/pci/pcie_ecam_synquacer.c                  |  600 +++++++++++
>  drivers/spi/Kconfig                                |    8 
>  drivers/spi/Makefile                               |    1 
>  drivers/spi/spi-synquacer.c                        |  491 +++++++++
>  include/configs/synquacer.h                        |  115 ++
>  lib/efi_loader/efi_capsule.c                       |    2 
>  36 files changed, 4162 insertions(+), 17 deletions(-)
>  create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi
>  create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
>  create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts
>  create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi
>  create mode 100644 board/socionext/developerbox/Kconfig
>  create mode 100644 board/socionext/developerbox/MAINTAINERS
>  create mode 100644 board/socionext/developerbox/Makefile
>  create mode 100644 board/socionext/developerbox/developerbox.c
>  create mode 100644 configs/synquacer_developerbox_defconfig
>  create mode 100644 doc/board/socionext/developerbox.rst
>  create mode 100644 doc/board/socionext/index.rst
>  create mode 100644 drivers/i2c/synquacer_i2c.c
>  create mode 100644 drivers/mmc/f_sdh30.c
>  create mode 100644 drivers/net/sni_netsec.c
>  create mode 100644 drivers/pci/pcie_ecam_synquacer.c
>  create mode 100644 drivers/spi/spi-synquacer.c
>  create mode 100644 include/configs/synquacer.h
> 
> --
> Masami Hiramatsu <masami.hiramatsu at linaro.org>