[PATCH 1/3] arm: dts: sunxi: h6: Update DT files
Andre Przywara
andre.przywara at arm.com
Thu May 27 02:44:36 CEST 2021
Update the H6 DT files from the Linux 5.12 release.
The changes are minimal (many LED node renames), but also help to enable
USB port 0 in U-Boot (later), enable the RSB device (not yet used in
U-Boot), and also introduce an MMC frequency limit.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
arch/arm/dts/sun50i-h6-beelink-gs1.dts | 6 +-----
arch/arm/dts/sun50i-h6-cpu-opp.dtsi | 20 ++++++++++----------
arch/arm/dts/sun50i-h6-orangepi-3.dts | 4 ++--
arch/arm/dts/sun50i-h6-orangepi.dtsi | 4 ++--
arch/arm/dts/sun50i-h6-pine-h64.dts | 7 ++++---
arch/arm/dts/sun50i-h6.dtsi | 26 ++++++++++++++++++++++++++
6 files changed, 45 insertions(+), 22 deletions(-)
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index 7c9dbde645b..b5808047d6e 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -43,7 +43,7 @@
leds {
compatible = "gpio-leds";
- power {
+ led {
label = "beelink:white:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
@@ -289,10 +289,6 @@
vcc-pm-supply = <®_aldo1>;
};
-&rtc {
- clocks = <&ext_osc32k>;
-};
-
&spdif {
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
index 1a5eddc5a40..8c6e8536b69 100644
--- a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
+++ b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
@@ -8,7 +8,7 @@
nvmem-cells = <&cpu_speed_grade>;
opp-shared;
- opp at 480000000 {
+ opp-480000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <480000000>;
@@ -17,7 +17,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp at 720000000 {
+ opp-720000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <720000000>;
@@ -26,7 +26,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp at 816000000 {
+ opp-816000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <816000000>;
@@ -35,7 +35,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp at 888000000 {
+ opp-888000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <888000000>;
@@ -44,7 +44,7 @@
opp-microvolt-speed2 = <820000 820000 1200000>;
};
- opp at 1080000000 {
+ opp-1080000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1080000000>;
@@ -53,7 +53,7 @@
opp-microvolt-speed2 = <880000 880000 1200000>;
};
- opp at 1320000000 {
+ opp-1320000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1320000000>;
@@ -62,7 +62,7 @@
opp-microvolt-speed2 = <940000 940000 1200000>;
};
- opp at 1488000000 {
+ opp-1488000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1488000000>;
@@ -71,7 +71,7 @@
opp-microvolt-speed2 = <1000000 1000000 1200000>;
};
- opp at 1608000000 {
+ opp-1608000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1608000000>;
@@ -80,7 +80,7 @@
opp-microvolt-speed2 = <1030000 1030000 1200000>;
};
- opp at 1704000000 {
+ opp-1704000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1704000000>;
@@ -89,7 +89,7 @@
opp-microvolt-speed2 = <1060000 1060000 1200000>;
};
- opp at 1800000000 {
+ opp-1800000000 {
clock-latency-ns = <244144>; /* 8 32k periods */
opp-hz = /bits/ 64 <1800000000>;
diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-orangepi-3.dts
index 15c9dd8c447..7e83f6146f8 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-3.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts
@@ -43,13 +43,13 @@
leds {
compatible = "gpio-leds";
- power {
+ led-0 {
label = "orangepi:red:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:green:status";
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index ebc120a9232..da0875bd38d 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -42,13 +42,13 @@
leds {
compatible = "gpio-leds";
- power {
+ led-0 {
label = "orangepi:red:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
};
- status {
+ led-1 {
label = "orangepi:green:status";
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
index 961732c52aa..b868ad17af8 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -44,17 +44,17 @@
leds {
compatible = "gpio-leds";
- heartbeat {
+ led-0 {
label = "pine-h64:green:heartbeat";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
};
- link {
+ led-1 {
label = "pine-h64:white:link";
gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
};
- status {
+ led-2 {
label = "pine-h64:blue:status";
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
@@ -142,6 +142,7 @@
vqmmc-supply = <®_bldo2>;
non-removable;
cap-mmc-hw-reset;
+ mmc-hs200-1_8v;
bus-width = <8>;
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index 8a62a9fbe34..af8b7d0ef75 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -436,6 +436,7 @@
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
+ max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -452,6 +453,7 @@
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
+ max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -468,6 +470,7 @@
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
+ max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -680,6 +683,8 @@
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>,
<&ccu RST_BUS_EHCI0>;
+ phys = <&usb2phy 0>;
+ phy-names = "usb";
status = "disabled";
};
@@ -690,6 +695,8 @@
clocks = <&ccu CLK_BUS_OHCI0>,
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>;
+ phys = <&usb2phy 0>;
+ phy-names = "usb";
status = "disabled";
};
@@ -949,6 +956,11 @@
pins = "PL9";
function = "s_cir_rx";
};
+
+ r_rsb_pins: r-rsb-pins {
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+ };
};
r_ir: ir at 7040000 {
@@ -979,6 +991,20 @@
#size-cells = <0>;
};
+ r_rsb: rsb at 7083000 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x07083000 0x400>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_RSB>;
+ clock-frequency = <3000000>;
+ resets = <&r_ccu RST_R_APB2_RSB>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ths: thermal-sensor at 5070400 {
compatible = "allwinner,sun50i-h6-ths";
reg = <0x05070400 0x100>;
--
2.17.5
More information about the U-Boot
mailing list