[PATCH] mtd: spinand: macronix: Add support for serial NAND flash

[Miquel Raynal]

Hi Jaime,

Jaime Liao <jaimeliao at mxic.com.tw> wrote on Thu, 27 May 2021 16:51:12
+0800:

> Macronix NAND Flash devices are available in different configurations
> and densities.
> 
> MX"35" means SPI NAND
> MX35"LF"/"UF" , LF means 3V and UF meands 1.8V
> MX35LF"2G" , 2G means 2Gbits
> MX35LF2G"E4"/"24"/"14",
> E4 means internal ECC and Quad I/O(x4)
> 24 means 8-bit ecc requirement and Quad I/O(x4)
> 14 means 4-bit ecc requirement and Quad I/O(x4)
> 
> MX35LF2G14AC is 3V 2Gbit serial NAND flash device
> (without on-die ECC)
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7926/MX35LF2G14AC,%203V,%202Gb,%20v1.1.pdf
> 
> MX35UF4G24AD/MX35UF2G24AD/MX35UF1G24AD is 1.8V 4Gbit serial NAND flash device
> (without on-die ECC)
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7980/MX35UF4G24AD,%201.8V,%204Gb,%20v0.00.pdf
> 
> MX35UF4GE4AD/MX35UF2GE4AD/MX35UF1GE4AD are 1.8V 4G/2Gbit serial
> NAND flash device with 8-bit on-die ECC
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7983/MX35UF4GE4AD,%201.8V,%204Gb,%20v0.00.pdf
> 
> MX35UF2GE4AC/MX35UF1GE4AC are 1.8V 2G/1Gbit serial
> NAND flash device with 8-bit on-die ECC
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7974/MX35UF2GE4AC,%201.8V,%202Gb,%20v1.0.pdf
> 
> MX35UF2G14AC/MX35UF1G14AC are 1.8V 2G/1Gbit serial
> NAND flash device (without on-die ECC)
> https://www.mxic.com.tw/Lists/Datasheet/Attachments/7931/MX35UF2G14AC,%201.8V,%202Gb,%20v1.1.pdf
> 
> Validated via normal(default) and QUAD mode by read, erase, read back,
> on Xilinx Zynq PicoZed FPGA board which included Macronix
> SPI Host(drivers/spi/spi-mxic.c).
> 
> Signed-off-by: Jaime Liao <jaimeliao at mxic.com.tw>
> ---
>  drivers/mtd/nand/spi/macronix.c | 100 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 100 insertions(+)
> 
> diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
> index 215f09a..8a33dce 100644
> --- a/drivers/mtd/nand/spi/macronix.c
> +++ b/drivers/mtd/nand/spi/macronix.c
> @@ -114,6 +114,106 @@ static const struct spinand_info macronix_spinand_table[] = {
>  					      &update_cache_variants),
>  		     SPINAND_HAS_QE_BIT,
>  		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
> +	SPINAND_INFO("MX35LF2G14AC", 0x20,
> +		     NAND_MEMORG(1, 2048, 64, 64, 2048, 2, 1, 1),
> +		     NAND_ECCREQ(4, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     SPINAND_HAS_QE_BIT,
> +		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
> +				     mx35lf1ge4ab_ecc_get_status)),

This looks like a copy of your previous patch, with the SPINAND_ID
macro dropped.

It would be great if you could clarify your intentions when sending
patches. This means:
- Counting up patch versions
- Explaining their differences and why

So, what is the purpose of this patch give the fact that I already
applied one very similar yesterday?

Thanks,
Miquèl