[PULL] u-boot-riscv/master

[Leo Liang]

On Thu, May 27, 2021 at 04:57:17PM +0800, Green Wan wrote:
> Hi Tom,
> 
> Thanks for the comments.
> 
> Not sure whether it catches different concerns, I plan to remove fdt_high and initrd_high since the bootm_* settings should be sufficient to calculate the values related to fdt_high and initrd_high. And I checked the bootm_* settings as below, the system can
>  boot without fdt_high and initrd_high.
> 
> - bootm_low is set to CONFIG_SYS_SDRAM_BASE
> - bootm_size is set to gd->ram_size (which comes from DT)
> - bootm_mapsize is now equal to bootm_size
> - boot log without fdt_high and initrd_high
> "## Flattened Device Tree blob at 88000000
> 	Booting using the fdt blob at 0x88000000
> 	Loading Device Tree to 00000000ffffa000, end 00000000fffff64d ... OK"
> 
> Hi Leo/Rick,
> 
> Should I create v12 for fu740 series patchset based on u-boot-riscv.git ? or revert [PATCH v11 7/8] plus a patch? Thanks a lot!
> 
> Regards,
> Green

Hi Green,

I think you could just create v12 patch.
I will do the revert, thanks!

Best regards,
Leo

> 
> 
> > On Wed, May 26, 2021 at 11:24 PM Tom Rini <trini at konsulko.com> wrote:
> > 
> > 
> > On Wed, May 26, 2021 at 04:12:50PM +0800, Leo Liang wrote:
> > 
> >  Hi Tom,
> >  
> >  The following changes since commit eb53b943be2949ca111140a8e05532cd74cda058:
> >  
> > Merge https://source.denx.de/u-boot/custodians/u-boot-sh (2021-05-23 10:15:15 -0400)
> > 
> > are available in the Git repository at: 
> >
> >
> >	git at source.denx.de:u-boot/custodians/u-boot-riscv.git 
> > 
> > for you to fetch changes up to 9358576a281ab5e3b7348685bbd5f713833a5048:
> > 
> >   drivers: pci: pcie_dw_common: fix Werror compilation error (2021-05-24 23:54:54 +0800)
> > 
> > Gitlab CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/7620
> 
> NAK.
> ERROR: fdt or initrd relocation disabled at boot time
> #993: FILE: include/configs/sifive-unmatched.h:65:
> +       "fdt_high=0xffffffffffffffff\0" \
> 
> ERROR: fdt or initrd relocation disabled at boot time
> #994: FILE: include/configs/sifive-unmatched.h:66:
> +       "initrd_high=0xffffffffffffffff\0" \
> 
> You can, but shouldn't disable initrd relocation.  You cannot disable
> device tree relocation as that leads to too many issues due to
> misalignment later.  Make use of bootm_size or similar to make sure
> everything is within an appropriate area of memory.  Thanks.
> 
> -- 
> Tom