[PULL] u-boot-riscv/master

[Green Wan]

On Thu, May 27, 2021 at 7:20 PM Tom Rini <trini at konsulko.com> wrote:

> On Thu, May 27, 2021 at 06:41:35PM +0800, Leo Liang wrote:
> > On Thu, May 27, 2021 at 04:57:17PM +0800, Green Wan wrote:
> > > Hi Tom,
> > >
> > > Thanks for the comments.
> > >
> > > Not sure whether it catches different concerns, I plan to remove
> fdt_high and initrd_high since the bootm_* settings should be
> sufficient to calculate the values related to fdt_high and initrd_high. And
> I checked the bootm_* settings as below, the system can
> > >  boot without fdt_high and initrd_high.
> > >
> > > - bootm_low is set to CONFIG_SYS_SDRAM_BASE
> > > - bootm_size is set to gd->ram_size (which comes from DT)
> > > - bootm_mapsize is now equal to bootm_size
> > > - boot log without fdt_high and initrd_high
> > > "## Flattened Device Tree blob at 88000000
> > >     Booting using the fdt blob at 0x88000000
> > >     Loading Device Tree to 00000000ffffa000, end 00000000fffff64d ...
> OK"
> > >
> > > Hi Leo/Rick,
> > >
> > > Should I create v12 for fu740 series patchset based on
> u-boot-riscv.git ? or revert [PATCH v11 7/8] plus a patch? Thanks a lot!
> > >
> > > Regards,
> > > Green
> >
> > Hi Green,
> >
> > I think you could just create v12 patch.
> > I will do the revert, thanks!
>

Hi Leo,

Thanks for the help. I just posted the v12 patchset.

--
Green

>
> Thanks for sorting this out quickly!
>
> --
> Tom
>