[PATCH v3 07/19] am335x, guardian: Update pinmux configuration

[Gireesh.Hiremath at in.bosch.com]

From: Moses Christopher <BollavarapuMoses.Christopher at in.bosch.com>

pinmux update for guardian board
- control ASP Board Power: GPIO, on/off ASP Board Power
- control Coincell Voltage Measurement: GPIO, enable/disable
  ADC measurements
- powerOff Device GPIO-PowerOff, cut the PMIC supply

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher at in.bosch.com>
---
 arch/arm/dts/am335x-guardian.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/am335x-guardian.dts b/arch/arm/dts/am335x-guardian.dts
index 7e70a96d25..207246b4e0 100644
--- a/arch/arm/dts/am335x-guardian.dts
+++ b/arch/arm/dts/am335x-guardian.dts
@@ -401,12 +401,12 @@
 
 	guardian_interface_pins: pinmux_guardian_interface_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x928, PIN_OUTPUT          | MUX_MODE7)
-			AM33XX_IOPAD(0x990, PIN_OUTPUT          | MUX_MODE7)
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP   | MUX_MODE7)
 			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 			AM33XX_IOPAD(0x980, PIN_INPUT           | MUX_MODE7)
 			AM33XX_IOPAD(0x984, PIN_INPUT           | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP   | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP   | MUX_MODE7)
 			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 			AM33XX_IOPAD(0x91c, PIN_INPUT           | MUX_MODE7)
-- 
2.20.1