[PATCH v6] imx: support for conga-QMX8 board

[Oliver Graute]

On 08/04/21, Stefano Babic wrote:
> Hi Oliver,
> 
> I was quite convinced this was the right one and I could merge it. Most
> builds were okl, until...x86 is built !
> 
> In fact, there are congatec boards based on intel, they are using the common
> path (../common), and due to your changes some i.MX specific include file is
> searched. And then, of course, it fails.
> 
> Here is what I get if I just run "make
> conga-qeval20-qa3-e3845_defconfig;make"
> 
>   CC      board/congatec/common/mmc.o
> board/congatec/common/mmc.c:8:10: fatal error: asm/arch/sys_proto.h: No such
> file or directory
>     8 | #include <asm/arch/sys_proto.h>
>       |          ^~~~~~~~~~~~~~~~~~~~~~
> 
> So I have to drop again the patch from u-boot-imx. Could you take a look
> please ? Thanks !

ok, the include statement was superflous so I removed it.

> Here is what I get if I just run "make
> conga-qeval20-qa3-e3845_defconfig;make"

now the above board is compiling again.

Best regards,

Oliver