[PATCH] drivers: net: add Aspeed MDIO driver

[Dylan Hung]

Add a driver for the MDIO interface for Aspeed AST2600 SOC.  The driver
only supports clause 22 for now.

Signed-off-by: Dylan Hung <dylan_hung at aspeedtech.com>
---
 drivers/net/Kconfig       |   7 +++
 drivers/net/Makefile      |   1 +
 drivers/net/aspeed_mdio.c | 128 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 136 insertions(+)
 create mode 100644 drivers/net/aspeed_mdio.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6c12959f37..4638180b74 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -826,6 +826,13 @@ config FSL_LS_MDIO
 	  This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
 	  on the mEMAC (which supports both Clauses 22 and 45).
 
+config ASPEED_MDIO
+	bool "Aspeed MDIO interface support"
+	depends on DM_MDIO
+	help
+	  This driver supports the MDIO bus of Aspeed AST2600 SOC.  The driver
+	  currently supports Clause 22.
+
 config MDIO_MUX_MMIOREG
 	bool "MDIO MUX accessed as a MMIO register access"
 	depends on DM_MDIO_MUX
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e4078d15a9..fe6c00fa48 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -101,3 +101,4 @@ obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o
 obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o
 obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o
 obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o
+obj-$(CONFIG_ASPEED_MDIO) += aspeed_mdio.o
diff --git a/drivers/net/aspeed_mdio.c b/drivers/net/aspeed_mdio.c
new file mode 100644
index 0000000000..a99715a728
--- /dev/null
+++ b/drivers/net/aspeed_mdio.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Aspeed MDIO driver
+ *
+ * (C) Copyright 2021 Aspeed Technology Inc.
+ *
+ * This file is inspired from the Linux kernel driver drivers/net/phy/mdio-aspeed.c
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <log.h>
+#include <miiphy.h>
+#include <net.h>
+#include <reset.h>
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#define ASPEED_MDIO_CTRL		0x0
+#define   ASPEED_MDIO_CTRL_FIRE		BIT(31)
+#define   ASPEED_MDIO_CTRL_ST		BIT(28)
+#define     ASPEED_MDIO_CTRL_ST_C45	0
+#define     ASPEED_MDIO_CTRL_ST_C22	1
+#define   ASPEED_MDIO_CTRL_OP		GENMASK(27, 26)
+#define     MDIO_C22_OP_WRITE		0b01
+#define     MDIO_C22_OP_READ		0b10
+#define   ASPEED_MDIO_CTRL_PHYAD	GENMASK(25, 21)
+#define   ASPEED_MDIO_CTRL_REGAD	GENMASK(20, 16)
+#define   ASPEED_MDIO_CTRL_MIIWDATA	GENMASK(15, 0)
+
+#define ASPEED_MDIO_DATA		0x4
+#define   ASPEED_MDIO_DATA_MDC_THRES	GENMASK(31, 24)
+#define   ASPEED_MDIO_DATA_MDIO_EDGE	BIT(23)
+#define   ASPEED_MDIO_DATA_MDIO_LATCH	GENMASK(22, 20)
+#define   ASPEED_MDIO_DATA_IDLE		BIT(16)
+#define   ASPEED_MDIO_DATA_MIIRDATA	GENMASK(15, 0)
+
+#define ASPEED_MDIO_TIMEOUT_US		1000
+
+struct aspeed_mdio_priv {
+	void *base;
+};
+
+static int aspeed_mdio_read(struct udevice *mdio_dev, int addr, int devad, int reg)
+{
+	struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev);
+	u32 ctrl;
+	u32 data;
+	int rc;
+
+	if (devad != MDIO_DEVAD_NONE)
+		return -EOPNOTSUPP;
+
+	ctrl = ASPEED_MDIO_CTRL_FIRE
+		| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg);
+
+	writel(ctrl, priv->base + ASPEED_MDIO_CTRL);
+
+	rc = readl_poll_timeout(priv->base + ASPEED_MDIO_DATA, data,
+				data & ASPEED_MDIO_DATA_IDLE,
+				ASPEED_MDIO_TIMEOUT_US);
+
+	if (rc < 0)
+		return rc;
+
+	return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data);
+}
+
+static int aspeed_mdio_write(struct udevice *mdio_dev, int addr, int devad, int reg, u16 val)
+{
+	struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev);
+	u32 ctrl;
+
+	if (devad != MDIO_DEVAD_NONE)
+		return -EOPNOTSUPP;
+
+	ctrl = ASPEED_MDIO_CTRL_FIRE
+		| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val);
+
+	writel(ctrl, priv->base + ASPEED_MDIO_CTRL);
+
+	return readl_poll_timeout(priv->base + ASPEED_MDIO_CTRL, ctrl,
+				  !(ctrl & ASPEED_MDIO_CTRL_FIRE),
+				  ASPEED_MDIO_TIMEOUT_US);
+}
+
+static const struct mdio_ops aspeed_mdio_ops = {
+	.read = aspeed_mdio_read,
+	.write = aspeed_mdio_write,
+};
+
+static int aspeed_mdio_probe(struct udevice *dev)
+{
+	struct aspeed_mdio_priv *priv = dev_get_priv(dev);
+	struct reset_ctl reset_ctl;
+	int ret = 0;
+
+	priv->base = dev_read_addr_ptr(dev);
+
+	ret = reset_get_by_index(dev, 0, &reset_ctl);
+	reset_deassert(&reset_ctl);
+
+	return 0;
+}
+
+static const struct udevice_id aspeed_mdio_ids[] = {
+	{ .compatible = "aspeed,ast2600-mdio" },
+	{ }
+};
+
+U_BOOT_DRIVER(aspeed_mdio) = {
+	.name = "aspeed_mdio",
+	.id = UCLASS_MDIO,
+	.of_match = aspeed_mdio_ids,
+	.probe = aspeed_mdio_probe,
+	.ops = &aspeed_mdio_ops,
+	.plat_auto = sizeof(struct mdio_perdev_priv),
+	.priv_auto = sizeof(struct aspeed_mdio_priv),
+};
-- 
2.25.1