[PATCH 2/8] pci: pci_mvebu: Fix read_config() with PCI_SIZE_8 or PCI_SIZE_16

[Stefan Roese]

On 22.10.21 16:22, Pali Rohár wrote:
> When reading 8 or 16 bits from config space, use appropriate readb() or
> readw() calls. This ensures that PCIe controller does not read more bits
> from endpoint card as asked by read_config() function.
> 
> Technically there should not be an issue with reading data from config
> space which are not later used as there are no clear-by-read registers.
> But it is better to use correct read operation based on requested size.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>
> Reviewed-by: Marek Behún <marek.behun at nic.cz>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   drivers/pci/pci_mvebu.c | 17 +++++++++++++++--
>   1 file changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
> index 8175511514ab..3991086e0d29 100644
> --- a/drivers/pci/pci_mvebu.c
> +++ b/drivers/pci/pci_mvebu.c
> @@ -184,9 +184,22 @@ static int mvebu_pcie_read_config(const struct udevice *bus, pci_dev_t bdf,
>   	writel(PCIE_CONF_ADDR(bdf, offset), pcie->base + PCIE_CONF_ADDR_OFF);
>   
>   	/* read data */
> -	data = readl(pcie->base + PCIE_CONF_DATA_OFF);
> +	switch (size) {
> +	case PCI_SIZE_8:
> +		data = readb(pcie->base + PCIE_CONF_DATA_OFF + (offset & 3));
> +		break;
> +	case PCI_SIZE_16:
> +		data = readw(pcie->base + PCIE_CONF_DATA_OFF + (offset & 2));
> +		break;
> +	case PCI_SIZE_32:
> +		data = readl(pcie->base + PCIE_CONF_DATA_OFF);
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
>   	debug("(addr,size,val)=(0x%04x, %d, 0x%08x)\n", offset, size, data);
> -	*valuep = pci_conv_32_to_size(data, offset, size);
> +	*valuep = data;
>   
>   	return 0;
>   }
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de