[PATCH v5 05/11] test/py: efi_capsule: add image authentication test

AKASHI Takahiro takahiro.akashi at linaro.org
Fri Nov 5 04:24:16 CET 2021 

On Thu, Nov 04, 2021 at 08:02:37PM -0600, Simon Glass wrote:
> Hi Takahiro,
> 
> On Thu, 4 Nov 2021 at 19:21, AKASHI Takahiro <takahiro.akashi at linaro.org> wrote:
> >
> > On Wed, Nov 03, 2021 at 08:49:04PM -0600, Simon Glass wrote:
> > > Hi Takahiro,
> > >
> > > On Wed, 3 Nov 2021 at 20:04, AKASHI Takahiro <takahiro.akashi at linaro.org> wrote:
> > > >
> > > > On Tue, Nov 02, 2021 at 08:58:15AM -0600, Simon Glass wrote:
> > > > > Hi Takahiro,
> > > > >
> > > > > On Thu, 28 Oct 2021 at 23:25, AKASHI Takahiro
> > > > > <takahiro.akashi at linaro.org> wrote:
> > > > > >
> > > > > > On Thu, Oct 28, 2021 at 09:17:49PM -0600, Simon Glass wrote:
> > > > > > > Hi Takahiro,
> > > > > > >
> > > > > > > On Thu, 28 Oct 2021 at 00:25, AKASHI Takahiro
> > > > > > > <takahiro.akashi at linaro.org> wrote:
> > > > > > > >
> > > > > > > > Add a couple of test cases against capsule image authentication
> > > > > > > > for capsule-on-disk, where only a signed capsule file with the verified
> > > > > > > > signature will be applied to the system.
> > > > > > > >
> > > > > > > > Due to the difficulty of embedding a public key (esl file) in U-Boot
> > > > > > > > binary during pytest setup time, all the keys/certificates are pre-created.
> > > > > > > >
> > > > > > > > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > > > > > > > ---
> > > > > > > >  .../py/tests/test_efi_capsule/capsule_defs.py |   5 +
> > > > > > > >  test/py/tests/test_efi_capsule/conftest.py    |  35 ++-
> > > > > > > >  test/py/tests/test_efi_capsule/signature.dts  |  10 +
> > > > > > > >  .../test_capsule_firmware_signed.py           | 233 ++++++++++++++++++
> > > > > > > >  4 files changed, 280 insertions(+), 3 deletions(-)
> > > > > > > >  create mode 100644 test/py/tests/test_efi_capsule/signature.dts
> > > > > > > >  create mode 100644 test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py
> > > > > > > >
> > > > > > > > diff --git a/test/py/tests/test_efi_capsule/capsule_defs.py b/test/py/tests/test_efi_capsule/capsule_defs.py
> > > > > > > > index 4fd6353c2040..aa9bf5eee3aa 100644
> > > > > > > > --- a/test/py/tests/test_efi_capsule/capsule_defs.py
> > > > > > > > +++ b/test/py/tests/test_efi_capsule/capsule_defs.py
> > > > > > > > @@ -3,3 +3,8 @@
> > > > > > > >  # Directories
> > > > > > > >  CAPSULE_DATA_DIR = '/EFI/CapsuleTestData'
> > > > > > > >  CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule'
> > > > > > > > +
> > > > > > > > +# v1.5.1 or earlier of efitools has a bug in sha256 calculation, and
> > > > > > > > +# you need build a newer version on your own.
> > > > > > > > +# The path must terminate with '/'.
> > > > > > > > +EFITOOLS_PATH = ''
> > > > > > > > diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py
> > > > > > > > index 6ad5608cd71c..b0e84dec4931 100644
> > > > > > > > --- a/test/py/tests/test_efi_capsule/conftest.py
> > > > > > > > +++ b/test/py/tests/test_efi_capsule/conftest.py
> > > > > > > > @@ -10,13 +10,13 @@ import pytest
> > > > > > > >  from capsule_defs import *
> > > > > > > >
> > > > > > > >  #
> > > > > > > > -# Fixture for UEFI secure boot test
> > > > > > > > +# Fixture for UEFI capsule test
> > > > > > > >  #
> > > > > > > >
> > > > > > > > -
> > > > > > > >  @pytest.fixture(scope='session')
> > > > > > > >  def efi_capsule_data(request, u_boot_config):
> > > > > > > > -    """Set up a file system to be used in UEFI capsule test.
> > > > > > > > +    """Set up a file system to be used in UEFI capsule and
> > > > > > > > +       authentication test.
> > > > > > > >
> > > > > > > >      Args:
> > > > > > > >          request: Pytest request object.
> > > > > > > > @@ -40,6 +40,26 @@ def efi_capsule_data(request, u_boot_config):
> > > > > > > >          check_call('mkdir -p %s' % data_dir, shell=True)
> > > > > > > >          check_call('mkdir -p %s' % install_dir, shell=True)
> > > > > > > >
> > > > > > > > +        capsule_auth_enabled = u_boot_config.buildconfig.get(
> > > > > > > > +                    'config_efi_capsule_authenticate')
> > > > > > > > +        if capsule_auth_enabled:
> > > > > > > > +            # Create private key (SIGNER.key) and certificate (SIGNER.crt)
> > > > > > > > +            check_call('cd %s; openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_SIGNER/ -keyout SIGNER.key -out SIGNER.crt -nodes -days 365'
> > > > > > > > +                       % data_dir, shell=True)
> > > > > > >
> > > > > > > run_and_log()?
> > > > > >
> > > > > > I have always used this style of coding in this file as well as
> > > > > > other my pytests in test/py/tests (filesystem and secure boot).
> > > > > >
> > > > > > So, at least in this patch, I don't want to have mixed styles.
> > > > >
> > > > > I don't mind about the style.
> > > > >
> > > > > Does the command appear in the test log?
> > > >
> > > > I don't think so as it is invoked in conftest.py.
> > > > If the command fails, the tests will skip, and if it generates
> > > > a improper signature, the tests will fail.
> > >
> > > Well that is what I am getting at. Can you check?
> >
> > Yes.
> >
> > > The test log is supposed to show everything that happened. It does
> > > that with other tests
> >
> > It does?
> > (I don't think so.)
> >
> > > and I worry that using this function to run
> > > things will mean that no one will be able to debug your test in CI.
> >
> > What is missing in general is that confest.py doesn't generate
> > line-by-line trace logs if needed.
> > It's not my test specific.
> 
> Can you try checking test-log.html ?
> 
> Here is an example with a vboot test. See the lines with 'openssl' and
> 'dtc' ? That is what I am talking about.
> 
> Do you see this output with the command you are using?

No. In your case, openssl and dtc are called in a test function,
while my tool is invoked as part of fixture in confest.py.

What I requested is that command executions in fixtures be logged as well.

-Takahiro Akashi

> 
> [-] Section: test_vboot[sha1-basic-sha1--None-False-True]
> TIME: NOW: 2021/11/04 19:52:55.916263
> 
> TIME: SINCE-PREV: 0:00:00.429408
> 
> TIME: SINCE-START: 0:00:00.429408
> 
> [-] Section: test_vboot[sha1-basic-sha1--None-False-True]/Starting U-Boot
> TIME: NOW: 2021/11/04 19:52:55.916582
> 
> TIME: SINCE-PREV: 0:00:00.000319
> 
> TIME: SINCE-START: 0:00:00.429727
> 
> [-] Stream: console
> Creating new bloblist size 400 at c000
> sandbox_serial serial: pinctrl_select_state_full:
> uclass_get_device_by_phandle_id: err=-19
> 
> 
> U-Boot 2021.10-00200-g458c5ec2f57-dirty (Nov 04 2021 - 19:52:48 -0600)
> 
> Model: sandbox
> DRAM:  128 MiB
> Core:  246 devices, 88 uclasses, devicetree: board
> WDT:   Not starting gpio-wdt
> WDT:   Not starting wdt at 0
> MMC:   mmc2: 2 (SD), mmc1: 1 (SD), mmc0: 0 (SD)
> Loading Environment from nowhere... OK
> In:    cros-ec-keyb
> Out:   vidconsole
> Err:   vidconsole
> Model: sandbox
> SCSI:
> Net:   eth0: eth at 10002000, eth5: eth at 10003000, eth3: sbe5, eth6:
> eth at 10004000, eth4: dsa-test-eth, eth2: lan0, eth7: lan1
> Hit any key to stop autoboot:  2 %08%08%08 0
> =>
> TIME: NOW: 2021/11/04 19:52:56.023596
> 
> TIME: SINCE-PREV: 0:00:00.107014
> 
> TIME: SINCE-START: 0:00:00.536741
> 
> TIME: SINCE-SECTION: 0:00:00.107114
> 
> [-] Stream: openssl
> +openssl genpkey -algorithm RSA -out /tmp/b/sandbox/sha1-basic/dev.key
> -pkeyopt rsa_keygen_bits:2048 -pkeyopt rsa_keygen_pubexp:65537
> ...................+++++
> ...............+++++
> 
> TIME: NOW: 2021/11/04 19:52:56.067325
> 
> TIME: SINCE-PREV: 0:00:00.043729
> 
> TIME: SINCE-START: 0:00:00.580470
> 
> [-] Stream: openssl
> +openssl req -batch -new -x509 -key /tmp/b/sandbox/sha1-basic/dev.key
> -out /tmp/b/sandbox/sha1-basic/dev.crt
> 
> TIME: NOW: 2021/11/04 19:52:56.077671
> 
> TIME: SINCE-PREV: 0:00:00.010346
> 
> TIME: SINCE-START: 0:00:00.590816
> 
> [-] Stream: openssl
> +openssl genpkey -algorithm RSA -out
> /tmp/b/sandbox/sha1-basic/prod.key -pkeyopt rsa_keygen_bits:2048
> -pkeyopt rsa_keygen_pubexp:65537
> ...........................+++++
> ............+++++
> 
> TIME: NOW: 2021/11/04 19:52:56.127578
> 
> TIME: SINCE-PREV: 0:00:00.049907
> 
> TIME: SINCE-START: 0:00:00.640723
> 
> [-] Stream: openssl
> +openssl req -batch -new -x509 -key /tmp/b/sandbox/sha1-basic/prod.key
> -out /tmp/b/sandbox/sha1-basic/prod.crt
> 
> TIME: NOW: 2021/11/04 19:52:56.136682
> 
> TIME: SINCE-PREV: 0:00:00.009104
> 
> TIME: SINCE-START: 0:00:00.649827
> 
> [-] Stream: dtc
> +dtc -I dts -O dtb -i /tmp/b/sandbox/sha1-basic/
> /scratch/sglass/cosarm/src/third_party/u-boot/files/test/py/tests/vboot/sandbox-kernel.dts
> -O dtb -o /tmp/b/sandbox/sha1-basic/sandbox-kernel.dtb
> 
> TIME: NOW: 2021/11/04 19:52:56.142636
> 
> TIME: SINCE-PREV: 0:00:00.005954
> 
> TIME: SINCE-START: 0:00:00.655781
> 
> [-] Stream: dtc
> +dtc -I dts -O dtb -i /tmp/b/sandbox/sha1-basic/
> /scratch/sglass/cosarm/src/third_party/u-boot/files/test/py/tests/vboot/sandbox-u-boot.dts
> -O dtb -o /tmp/b/sandbox/sha1-basic/sandbox-u-boot.dtb
> /scratch/sglass/cosarm/src/third_party/u-boot/files/test/py/tests/vboot/sandbox-u-boot.dts:7.10-9.4:
> Warning (unit_address_vs_reg): /reset at 0: node has a unit name, but no
> reg or ranges property
> 
> TIME: NOW: 2021/11/04 19:52:56.147797
> 
> Regards,
> Simon

More information about the U-Boot mailing list