[PATCH 01/11] mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC

[Sean Anderson]

[ fsl_esdhc commit 41dec2fe99512e941261594f522b2e7d485c314b ]

U-boot prefers DM_MMC + BLK for MMC. Now eSDHC driver has already
support it, so let's force to use it.

- Drop non-BLK support for DM_MMC introduced by below patch.
  66fa035 mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled

- Support only DM_MMC + BLK (assuming BLK is always enabled for DM_MMC).

- Use DM_MMC instead of BLK for conditional compile.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---

 drivers/mmc/Kconfig         |  2 ++
 drivers/mmc/fsl_esdhc_imx.c | 33 +--------------------------------
 2 files changed, 3 insertions(+), 32 deletions(-)

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 1569e8c44a..313244682a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -790,6 +790,7 @@ endif
 
 config FSL_ESDHC
 	bool "Freescale/NXP eSDHC controller support"
+	depends on BLK
 	help
 	  This selects support for the eSDHC (Enhanced Secure Digital Host
 	  Controller) found on numerous Freescale/NXP SoCs.
@@ -826,6 +827,7 @@ config FSL_ESDHC_VS33_NOT_SUPPORT
 
 config FSL_ESDHC_IMX
 	bool "Freescale/NXP i.MX eSDHC controller support"
+	depends on BLK
 	help
 	  This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
 	  Controller) found on numerous Freescale/NXP SoCs.
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index aabf39535f..0a7f7e61cb 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -39,10 +39,6 @@
 #include <dm/ofnode.h>
 #include <linux/iopoll.h>
 
-#if !CONFIG_IS_ENABLED(BLK)
-#include "mmc_private.h"
-#endif
-
 #ifndef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
 #ifdef CONFIG_FSL_USDHC
 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE	1
@@ -58,7 +54,6 @@ DECLARE_GLOBAL_DATA_PTR;
 				IRQSTATEN_DEBE | IRQSTATEN_BRR | IRQSTATEN_BWR | \
 				IRQSTATEN_DINT)
 #define MAX_TUNING_LOOP 40
-#define ESDHC_DRIVER_STAGE_VALUE 0xffffffff
 
 struct fsl_esdhc {
 	uint    dsaddr;		/* SDMA system address register */
@@ -157,7 +152,7 @@ struct fsl_esdhc_priv {
 	unsigned int clock;
 	unsigned int mode;
 	unsigned int bus_width;
-#if !CONFIG_IS_ENABLED(BLK)
+#if !CONFIG_IS_ENABLED(DM_MMC)
 	struct mmc *mmc;
 #endif
 	struct udevice *dev;
@@ -1506,9 +1501,6 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	struct esdhc_soc_data *data =
 		(struct esdhc_soc_data *)dev_get_driver_data(dev);
 	struct mmc *mmc;
-#if !CONFIG_IS_ENABLED(BLK)
-	struct blk_desc *bdesc;
-#endif
 	int ret;
 
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
@@ -1607,25 +1599,6 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	mmc = &plat->mmc;
 	mmc->cfg = &plat->cfg;
 	mmc->dev = dev;
-#if !CONFIG_IS_ENABLED(BLK)
-	mmc->priv = priv;
-
-	/* Setup dsr related values */
-	mmc->dsr_imp = 0;
-	mmc->dsr = ESDHC_DRIVER_STAGE_VALUE;
-	/* Setup the universal parts of the block interface just once */
-	bdesc = mmc_get_blk_desc(mmc);
-	bdesc->if_type = IF_TYPE_MMC;
-	bdesc->removable = 1;
-	bdesc->devnum = mmc_get_next_devnum();
-	bdesc->block_read = mmc_bread;
-	bdesc->block_write = mmc_bwrite;
-	bdesc->block_erase = mmc_berase;
-
-	/* setup initial part type */
-	bdesc->part_type = mmc->cfg->part_type;
-	mmc_list_add(mmc);
-#endif
 
 	upriv->mmc = mmc;
 
@@ -1730,14 +1703,12 @@ static const struct udevice_id fsl_esdhc_ids[] = {
 	{ /* sentinel */ }
 };
 
-#if CONFIG_IS_ENABLED(BLK)
 static int fsl_esdhc_bind(struct udevice *dev)
 {
 	struct fsl_esdhc_plat *plat = dev_get_plat(dev);
 
 	return mmc_bind(dev, &plat->mmc, &plat->cfg);
 }
-#endif
 
 U_BOOT_DRIVER(fsl_esdhc) = {
 	.name	= "fsl_esdhc",
@@ -1745,9 +1716,7 @@ U_BOOT_DRIVER(fsl_esdhc) = {
 	.of_match = fsl_esdhc_ids,
 	.of_to_plat = fsl_esdhc_of_to_plat,
 	.ops	= &fsl_esdhc_ops,
-#if CONFIG_IS_ENABLED(BLK)
 	.bind	= fsl_esdhc_bind,
-#endif
 	.probe	= fsl_esdhc_probe,
 	.plat_auto	= sizeof(struct fsl_esdhc_plat),
 	.priv_auto	= sizeof(struct fsl_esdhc_priv),
-- 
2.25.1