[PATCH 11/11] mmc: fsl_esdhc_imx: set sysctl register for clock initialization

[Sean Anderson]

From: Yangbo Lu <yangbo.lu at nxp.com>

[ fsl_esdhc commit 263ddfc3454ead3a988adef39b962479adce2b28 ]

The initial clock setting should be through sysctl register only,
while the mmc_set_clock() will call mmc_set_ios() introduce other
configurations like bus width, mode, and so on.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>
Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---

 drivers/mmc/fsl_esdhc_imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 886a489777..fc92ac3826 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -1022,7 +1022,7 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 #endif
 
 	/* Set the initial clock speed */
-	mmc_set_clock(mmc, 400000, MMC_CLK_ENABLE);
+	set_sysctl(priv, mmc, 400000);
 
 	/* Disable the BRR and BWR bits in IRQSTAT */
 	esdhc_clrbits32(&regs->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
-- 
2.25.1