[RFC PATCH 06/13] sunxi: add support for basical pinmux setup on R329

[Samuel Holland]

On 7/22/21 1:30 AM, Icenowy Zheng wrote:
> Allwinner R329 SoC is the first known Allwinner SoC that has two
> possible pinmux setups for MMC0 controller.
> 
> Support configuration of both setups of MMC0 and UART0 at PB4/5.
> 
> Signed-off-by: Icenowy Zheng <icenowy at sipeed.com>
> ---
>  arch/arm/include/asm/arch-sunxi/gpio.h |  3 +++
>  arch/arm/mach-sunxi/Kconfig            |  7 +++++++
>  arch/arm/mach-sunxi/board.c            |  4 ++++
>  board/sunxi/board.c                    | 20 ++++++++++++++++++++
>  4 files changed, 34 insertions(+)
> 
> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
> index 2969a530ae..da9acfab78 100644
> --- a/arch/arm/include/asm/arch-sunxi/gpio.h
> +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
> @@ -166,12 +166,14 @@ enum sunxi_gpio_number {
>  #define SUN8I_A83T_GPB_UART0	2
>  #define SUN8I_V3S_GPB_UART0	3
>  #define SUN50I_GPB_UART0	4
> +#define SUN50I_R329_GPB_UART0	2
>  
>  #define SUNXI_GPC_NAND		2
>  #define SUNXI_GPC_SPI0		3
>  #define SUNXI_GPC_SDC2		3
>  #define SUN6I_GPC_SDC3		4
>  #define SUN50I_GPC_SPI0		4
> +#define SUN50I_R329_GPC_SDC0	3
>  
>  #define SUN8I_GPD_SDC1		3
>  #define SUNXI_GPD_LCD0		2
> @@ -185,6 +187,7 @@ enum sunxi_gpio_number {
>  #define SUNXI_GPF_SDC0		2
>  #define SUNXI_GPF_UART0		4
>  #define SUN8I_GPF_UART0		3
> +#define SUN50I_R329_GPF_SDC0	5
>  
>  #define SUN4I_GPG_SDC1		4
>  #define SUN5I_GPG_SDC1		2
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 49f94f095c..391a3dd9e5 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -672,6 +672,13 @@ config MMC3_CD_PIN
>  	---help---
>  	See MMC0_CD_PIN help text.
>  
> +config MMC0_PINS
> +	string "Pins for mmc0"
> +	default "PF"
> +	depends on MACH_SUN50I_R329
> +	---help---
> +	See MMC1_PINS help text.
> +

Please make this a Boolean MMC0_PINS_PC (this area was changed since you
sent these patches).

>  config MMC1_PINS
>  	string "Pins for mmc1"
>  	default ""
> diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
> index e979e426dd..1aa31c7e05 100644
> --- a/arch/arm/mach-sunxi/board.c
> +++ b/arch/arm/mach-sunxi/board.c
> @@ -129,6 +129,10 @@ static int gpio_init(void)
>  	sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H616_GPH_UART0);
>  	sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H616_GPH_UART0);
>  	sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP);
> +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_R329)
> +	sunxi_gpio_set_cfgpin(SUNXI_GPB(4), SUN50I_R329_GPB_UART0);
> +	sunxi_gpio_set_cfgpin(SUNXI_GPB(5), SUN50I_R329_GPB_UART0);
> +	sunxi_gpio_set_pull(SUNXI_GPB(5), SUNXI_GPIO_PULL_UP);
>  #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
>  	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
>  	sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index 67acc01d83..bfc90345d9 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -417,12 +417,32 @@ static void mmc_pinmux_setup(int sdc)
>  
>  	switch (sdc) {
>  	case 0:
> +#if defined(CONFIG_MACH_SUN50I_R329)

Please use if (IS_ENABLED(...)).

Regards,
Samuel

> +		pins = sunxi_name_to_gpio_bank(CONFIG_MMC0_PINS);
> +
> +		if (pins == SUNXI_GPIO_C) {
> +			/* SDC0: PC0-PC6 */
> +			for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++) {
> +				sunxi_gpio_set_cfgpin(pin, SUN50I_R329_GPC_SDC0);
> +				sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
> +				sunxi_gpio_set_drv(pin, 2);
> +			}
> +		} else {
> +			/* SDC0: PF0-PF5 */
> +			for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) {
> +				sunxi_gpio_set_cfgpin(pin, SUN50I_R329_GPF_SDC0);
> +				sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
> +				sunxi_gpio_set_drv(pin, 2);
> +			}
> +		}
> +#else
>  		/* SDC0: PF0-PF5 */
>  		for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) {
>  			sunxi_gpio_set_cfgpin(pin, SUNXI_GPF_SDC0);
>  			sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
>  			sunxi_gpio_set_drv(pin, 2);
>  		}
> +#endif
>  		break;
>  
>  	case 1:
>