[Uboot-stm32] [PATCH] arm: dts: stm32mp15: alignment with v5.15-rc6
Patrice CHOTARD
patrice.chotard at foss.st.com
Wed Nov 10 17:01:33 CET 2021
Hi Patrick
On 10/26/21 9:05 AM, Patrice CHOTARD wrote:
> Hi Patrick
>
> On 10/21/21 11:54 AM, Patrick Delaunay wrote:
>> Device tree alignment with Linux kernel v5.15-rc6
>> - Set {bitclock,frame}-master phandles on ST DKx
>> - Add coprocessor detach mbox on stm32mp15x-dkx boards
>> - Add coprocessor detach mbox on stm32mp157c-ed1 board
>>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> ---
>>
>> arch/arm/dts/stm32mp157c-ed1.dts | 4 ++--
>> arch/arm/dts/stm32mp15xx-dkx.dtsi | 12 ++++++------
>> 2 files changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
>> index 6e89f88a17..f62b46b8dd 100644
>> --- a/arch/arm/dts/stm32mp157c-ed1.dts
>> +++ b/arch/arm/dts/stm32mp157c-ed1.dts
>> @@ -321,8 +321,8 @@
>> &m4_rproc {
>> memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
>> <&vdev0vring1>, <&vdev0buffer>;
>> - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
>> - mbox-names = "vq0", "vq1", "shutdown";
>> + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
>> + mbox-names = "vq0", "vq1", "shutdown", "detach";
>> interrupt-parent = <&exti>;
>> interrupts = <68 1>;
>> status = "okay";
>> diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
>> index 68987f64c5..8fc93b0f94 100644
>> --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
>> +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
>> @@ -228,15 +228,15 @@
>> cs42l51_tx_endpoint: endpoint at 0 {
>> reg = <0>;
>> remote-endpoint = <&sai2a_endpoint>;
>> - frame-master;
>> - bitclock-master;
>> + frame-master = <&cs42l51_tx_endpoint>;
>> + bitclock-master = <&cs42l51_tx_endpoint>;
>> };
>>
>> cs42l51_rx_endpoint: endpoint at 1 {
>> reg = <1>;
>> remote-endpoint = <&sai2b_endpoint>;
>> - frame-master;
>> - bitclock-master;
>> + frame-master = <&cs42l51_rx_endpoint>;
>> + bitclock-master = <&cs42l51_rx_endpoint>;
>> };
>> };
>> };
>> @@ -478,8 +478,8 @@
>> &m4_rproc {
>> memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
>> <&vdev0vring1>, <&vdev0buffer>;
>> - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
>> - mbox-names = "vq0", "vq1", "shutdown";
>> + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
>> + mbox-names = "vq0", "vq1", "shutdown", "detach";
>> interrupt-parent = <&exti>;
>> interrupts = <68 1>;
>> status = "okay";
>>
>
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> Thanks
> Patrice
> _______________________________________________
> Uboot-stm32 mailing list
> Uboot-stm32 at st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
>
Applied on u-boot-stm/master
Thanks
More information about the U-Boot
mailing list