[PATCH] ARM: stm32: Align mtdparts with SPI NOR layout on DHSOM

Patrice CHOTARD patrice.chotard at foss.st.com
Wed Nov 10 18:05:49 CET 2021


Hi Tom

On 11/10/21 5:02 PM, Tom Rini wrote:
> On Wed, Nov 10, 2021 at 04:56:37PM +0100, Patrice CHOTARD wrote:
>> Hi Marek
>>
>> On 10/25/21 10:43 AM, Patrick DELAUNAY wrote:
>>> Hi,
>>>
>>> On 10/24/21 12:46 AM, Marek Vasut wrote:
>>>> The DHSOM uses different SPI NOR layout than the ST devkit, stop
>>>> pulling in the ST specific runtime mtdparts settings and adjust
>>>> the mtdparts accordingly.
>>>>
>>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>>> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
>>>> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
>>>> ---
>>>>   board/dhelectronics/dh_stm32mp1/Makefile | 1 -
>>>>   configs/stm32mp15_dhcom_basic_defconfig  | 3 ++-
>>>>   configs/stm32mp15_dhcor_basic_defconfig  | 2 ++
>>>>   3 files changed, 4 insertions(+), 2 deletions(-)
>>>>
>>>
>>> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
>>>
>> Applied on u-boot-stm/master 
>> Thanks
> 
> Question and not saying don't send me a PR with it.  Why aren't these in
> the per-board dts files with the fixed-partition binding?  That's been
> long long supported in Linux and U-Boot parses it as well.
> 

We have some constraints which need to be solved before switching on this bindings.
Usage of fixed-partition bindings is on our todo list ;-)

Thanks
Patrice


More information about the U-Boot mailing list